Categories

Best Accessories Tap Wrenches Tools

Segomo Tools 110 Piece Hardened Alloy Steel SAE Tap And Die Threading Tool Set With Storage Case | SAE Tap and Die Set | Rethreading Kit | Tap Set | Tap and Die Kit - TD110SAE

  • ...threading easily and smoothly and prevent overthreading..
  • [ Durable Design & Easy Storage ] Our tap and die sets are constructed from hardened alloy steel for maximum strength and durability. They also come in heavy-duty plastic blow-molded carrying case for easy transport, safe storage & quick organization..
  • [ Handy Accessories] This large tap and die set comes also with two tap wrenches (x2): M3-M12, M6-M20, two die wrenches : 25mm, 38mm O/D adn one T-Type tap wrench: M3-M6..
  • SAE Tap Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNC, 12-24 UNC, 1/4-20 UNC, 1/4-28 UNF, 1/4-24 UNS, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/8-27NPT, 1/4-18NPT..
  • SAE Die Sizes: 4-40 UNC, 6-32 UNC, 8-32 UNC, 10-24 UNC, 10-32 UNF, 12-24 UNC, 1/4-20 UNC, 1/4-24 UNS, 1/4-28 UNF, 1/4-32 UNS, 5/16-18 UNC, 5/16-24 UNF, 3/8-16 UNC, 3/8-24 UNF, 7/16-14 UNC, 7/16-20 UNF, 1/2-13 UNC, 1/2-20 UNF, 9/16-12 UNC, 9/16-18 UNF, 5/8-11 UNC, 5/8-18 UNF, 3/4-10 UNC, 3/4-16 UNF, M6x1.0, M8x1.25, M10x1.0, M10x1.5, M11x1.5, M12x1.25, M12x1.75, M14x1.25, M18x1.5, 1/4-....
Check Stock

Men's Belt, Nexbelt EDC NEW! Guardian Black Camo Nylon Gun Utility Harness Ratchet Belt for Concealed Carry

  • 37-IN-1 GUN MULTI-TOOL PERFECT FOR RIFLE AND SHOTGUN OWNERS.
  • TOOLS FOR HUNTERS AND SHOOTERS: choke wrench for .410 - 10 gauges, detachable pin punch, 8-32 threaded post and receiver, detachable pick, 2 carbon scrapers, windage/elevation adjuster, and tap hammer.
  • TOOLS FOR EVERYDAY NEEDS: 3.25” 440 stainless steel knife, 12 bits, 3 position locking bit driver, combination needle-nose pliers, carbide cutter, bottle opener, 4 wrenches, and flathead screwdriver.
  • ALWAYS BY YOUR SIDE: durable ballistic nylon sheath is MOLLE compatible stores the extra bits, has two lashing grommets, a drainage grommet and can even attach to your belt.
  • WRENCHES AND BITS: 4MM, 5MM, ¼”, and 3/8” wrenches and T10, T15, and T20 Torx.
  • 5/32”, 9/64”, 1/8”, and 3/32” Allen bits.
Check Stock

Nxtop Adjustable T-Handle Ratchet Tap Holder Wrench + 5pcs M3-M8 Machine Screw Thread Metric Plug Tap

  • 3-8mm 7/64 - 5/16" T-Handle Ratchet Tap Wrench Machinist Tool Reversion.
  • Small Size T-Handle Tap Wrench-Chuck Type M3-M8.
  • Usage: For Taps M3-M8 Features: T-Handle Ratcheting Tap Wrenches Three position gear box for quick, efficient ratcheting action Designed for use with taps and can also use on the left hand tap , reamers, screw extractors and other tools with a square shank.
Check Stock

Muzerdo 110PCS Standard Sae and Metric Bearing Steel Tap and Die Rethreading Kit

  • ...x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2....
Check Stock

Real Avid Gun Tool Max, 37-in-1 Multitool for Gunsmithing, Includes Pliers, Wire Cutters, Knife Blade, Universal Choke Wrench, Bits, Wrenches & Sheath, Perfect EDC Tool for Hunting & Gun Owners

  • 37-IN-1 GUN MULTI-TOOL PERFECT FOR RIFLE AND SHOTGUN OWNERS.
  • TOOLS FOR HUNTERS AND SHOOTERS: choke wrench for .410 - 10 gauges, detachable pin punch, 8-32 threaded post and receiver, detachable pick, 2 carbon scrapers, windage/elevation adjuster, and tap hammer.
  • TOOLS FOR EVERYDAY NEEDS: 3.25” 440 stainless steel knife, 12 bits, 3 position locking bit driver, combination needle-nose pliers, carbide cutter, bottle opener, 4 wrenches, and flathead screwdriver.
  • ALWAYS BY YOUR SIDE: durable ballistic nylon sheath is MOLLE compatible stores the extra bits, has two lashing grommets, a drainage grommet and can even attach to your belt.
  • WRENCHES AND BITS: 4MM, 5MM, ¼”, and 3/8” wrenches and T10, T15, and T20 Torx.
  • 5/32”, 9/64”, 1/8”, and 3/32” Allen bits.
Check Stock

OMT SAE & Metric Tap and Die Set 80pcs | SAE Thread Types NC NF NPT | Tap Die Set Metric SAE Standard for Cutting External and Internal Threads

  • ALL-IN-ONE TAP & DIE SET: This 80-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the 34 most needed standard and metric sizes, from #4 (14/125") to 1/2 inch and from M3 to M12.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • ADDITIONAL TOOLS: In addition to the 68 taps and dies, this tool set includes protective gloves, both long and T-handle wrenches, 1/8" flathead screwdrivers, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASES: Separate sturdy storage cases store and organize the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

NEIKO 00908A Tap and Die Set | 76 Piece Threading Tool | Standard & Metric |Alloy Steel | Hexagon T Type Wrench | SAE and MM

  • [APPLICATION]: Taps and dies are tools used to create purpose screw threads, which is called threading. Use the tap to cut threads on the holes where threads fasteners are positioned and use the die to cut threads..
  • [DURABLE]: Tap and dies are constructed of durable alloy steel for a long life to build new tools or repair damaged and worn threads..
  • [SAE & METRIC]: 34pc tap & 34pc die: M3x0.5, M4x0.7, M4x0.75, M5x0.8, M5x0.9, M6x1, M7x1, M8x1, M9x1, M10x1.25, M10x1.5 ,M11x1.5, M12x1.5, M12x1.75, M8x1.25, M9x1.25.
  • [SIZES]: 4-40UNC, 6-32UNC, 8-32UNC, 10-24UNC, 10-32VNF, 12-24UNC, 1/4-20UNC, 1/4-28UNF, 5/16-18UNC, 5/16-24UNF, 3/8-16UNC, 3/8-24UNF, 7/16-14UNC.
  • [SIZES]: 7/16-20UNF, 1/2-13UNC, 1/2-20UNF, 1/8-28BSP, 1/8-27NPT | 2pc screwdriver pitch gauge, 1pc screwdriver, 2pc T type tap wrenches: 1/4" and 1/2" capacity.
Check Stock

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • ...x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carbon steel, abrasive steel, malleable cast iron, and other difficult to machine metal materials.
  • EASY STORAGE: Heavy-duty 17” x 2.25” x 12.75” inch (43.2cm x 5.7cm x 32.4cm) plastic blow-molded carrying case with 2 side latches and built-in handle for easy transportation, safe storage, and quick organization.
  • Each compartment is labeled with sizing for simple identification.
  • PACKAGE CONTENTS: Combination set contains both metric taps and dies.
  • Tap die set metric tap die metal threader package includes 35 taper taps, 35 plug taps, 35 dies, 2....
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it..
  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be able to pull the right size out of the box when you need it..
  • Wrenches – All tap and die bits need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of cour....
Check Stock

ORION MOTOR TECH 86pc Tap and Hex Die Set in SAE and Metric | Titanium Coated Steel Tap Set and Die Tool Set for Homeowners Mechanics Metric Standard Internal External Threading(Iron Case)

  • ALL-IN-ONE TAP & DIE SET: This 86-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the most needed standard and metric sizes, from #4 (14/125") to 5/8 inch and from M3 to M16.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • PREMIUM DURABILITY: This tool set for homeowners, craftsmen, and mechanics is made of high-carbon chromium bearing steel.
  • titanium plating provides even greater strength, durability, and longevity so you can tackle any job with confidence.
  • ADDITIONAL TOOLS: In addition to the 78 taps and dies, this tool set includes both adjustable and T-handle wrenches, a 1/8" flathead screwdriver, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASE: The metal storage case stores and organizes the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

Keenso 4 x Stem Screws, Titanium Alloy M5*18 Stem Screws Set for Mountain Bike Road Bicycles Bolts Replacement Accessories(Colorful)

  • Carbon steel pipe taps are used to clean and re-thread damaged threads.
  • tough and durable bearing steel,quick-disconnect bolts.
  • Convenient to hold,for tightening ratchet wrenches,multi-function wrenches,convenient force.It is also suitable for ordinary screw removal.
  • Removal of damaged,rusted or peeled screws and fasteners can be used to remove and clean damaged water pipelines during water pipe maintenance.
  • Only for wire screw puller tap components,excluding other demo accessories in the picture.
Check Stock

Irwin Hanson 9740 1\ 10mm-1.5 Hexagon Metric Die

  • ...lows the user to determine the profile of the given thread and quickly categorize the thread by shape and pitch..
  • T Handle Tap Wrench: T Handles hold the end of a tap to provide extra leverage for hand tapping making them very useful for confined spaces or where extra reach or leverage is required. T Handle Tap wrenches may also be used with screw extractors, drills, and other tools..
  • Material: Taps and dies are used to cut metals and are typically made of high-speed steel or hardened carbon steel, with the former is much more robust and used for a broader range of material. These cutting materials are suitable for threading steel, cast steel, cast iron, non-ferrous metals, plastics, softwood, and hardwood..
Check Stock