Categories

Best Accurate Temperature Controller

hygger 10-25 Gallon Small Aquarium Heater with LED Display Controller, Quartz Submersible Fish Tank Heater 100 W Saltwater Freshwater

  • 【Auto Shut Off】 ①Automatic overheat system will shuts the unit off when the water temperature over 95°F. ② Running dry protection will shut off unit when the heater rod out of water. ③ The power cord 6.3 feet in length and is UL listed..
  • 【Adjust the Temperature to Your Needs】 Equipped with an Intelligent IC temp controller, which will turn the heater off when it reaches a preset temperature and turn the heater back on when the temperature dips below the setting. Adjust the setting of temperature from 59℉ to 93℉ to keep aquarium proper temperature..
  • 【 At-a-Glance Temperature Monitoring Controller】 Build in LED temp controller shows both set temperature and real time water temperature . Red indicator light turns on when heating and turns blue in the situation reached set temp or failure alarm. It can be accurate enough to keep temperatures with +/- 1 degrees..
  • 【Shatter Resistant, Efficient】 The 100w fish tank heater with shatter-resistant quartz glass heating element & uses a nickel-chromium heating wire that provides faster and more efficient heating. Fish heater guard is made of high-temperature PC plastic and to protects your fish getting burn. It also has two-hole slots on the back make it easy for installation to walls by s....
Check Stock

hygger 40-75 Gallon Small Aquarium Heater with LED Display Controller, Quartz Submersible Fish Tank Heater 300 W Saltwater Freshwater

  • 【Auto Shut Off】 ①Automatic overheat system will shuts the unit off when the water temperature over 95°F. ② Running dry protection will shut off unit when the heater rod out of water. ③ The power cord 6.3 feet in length and is UL listed..
  • 【Adjust the Temperature to Your Needs】 Equipped with an Intelligent IC temp controller, which will turn the heater off when it reaches a preset temperature and turn the heater back on when the temperature dips below the setting. Adjust the setting of temperature from 59℉ to 93℉ to keep aquarium proper temperature..
  • 【 At-a-Glance Temperature Monitoring Controller】 Build in LED temp controller shows both set temperature and real time water temperature . Red indicator light turns on when heating and turns blue in the situation reached set temp or failure alarm. It can be accurate enough to keep temperatures with +/- 1 degrees..
  • 【Shatter Resistant, Efficient】 The 100w fish tank heater with shatter-resistant quartz glass heating element & uses a nickel-chromium heating wire that provides faster and more efficient heating. Fish heater guard is made of high-temperatu....
Check Stock

Replacement Parts for Traeger Temperature Control Panel Digital Kit for Traeger Pro 20/22/34 Bac365 Pro Series Wood Pellet Smoker Grills Controller Including Sensor and Meat Probe 2pc

  • Includes Digital Led Temperature Display ，Universal control panel fits Traeger pellet grills pro 20 ,22 ,34 series, to replace Bac365 Pro Series....
  • Package include :One Digital Temperature Control Panel ，one RTD temperature Probe sensor and two meat probes and necessary hardware.
  • High quality aluminum knob for switching models and adjusting temperatures range 180 ℉ to 450 ℉.
  • High quality aluminum knob for switching models and eight cooking temperature settings ,temperatures range 180 ℉ to 450 ℉.Replaces 3 speed smoker....
  • Upgrade Pro Controller: It's easy to display accurate temperature and also you can read in direct sunlight through our digital pro controller..
Check Stock

Digital Heating Mantle with Magnetic Stirring, 2000ml, 1600rpm, 110V, 450W

  • Digital heating mantle with stirring, 2000ml, 450W, 110V.
  • High quality aluminum silicate cotton jacket provides even heating for a round bottom flask (boiling flask not included, available separately).
  • Temperature control range: RT+20～250℃ (the external temperature probe must be connected for the temperature control and display to work properly).
  • PID single screen temperature controller with LCD display for easy and accurate temperature control (PT100 sensor included).
  • One year warranty with US-based professional customer support..
Check Stock

Ohuhu Digital Seedling Heat Mat Thermostat Controller for Seed Germination, Reptiles and Brewing, 68-108℉ Temperature Control

  • ???? Safe & Reliable: This highly accurate thermostat controller will adjust the mat’s temperature in seconds, keeping your plants and pets cozy and comfy. This outlet thermostat controller will keep the temperatures between 68°—108°F (20°— 42°C) with the touch of a button..
  • ???? Streamlined Button Panel: The 3-button control panel cuts out the frills. Operation is simple—just plug it in to any three-prong outlet, change the temperature with the up and down buttons, and press “set” to lock it in..
  • ???? Plants, Pets, and More: Keeping your plants and animals healthy and strong is hard work! Let Ohuhu help you out. This thermostat remote can create the perfect environment for hatching, germination, rooting, fermentation, and flowering..
  • ???? Easy to Read Display: No more squinting in the dark. An ultra-bright LED screen displays the temperature for easy viewing. One button toggle between Fahrenheit/Celsius displays..
  • ???? Hang or Stick It Anywhere: Install the controller wherever you please with the included a hanging cable and a suction hook! Install the thermostat on a wall, on a terrarium, on a shelf, on a cabinet, and so much more..
Check Stock

DIGITEN Wireless Thermostat Plug-in Temperature Controller Outlet Remote Control Built in Temp Sensor Thermometer Heating Cooling Mode for Fan Heater Greenhouse Home Brew Reptile, Black

  • ❤️【Remote Control Built in Temp Sensor】: Built-in highly accurate temperature sensor, the temperature is detected automatically by remote controller. When current temperature reach to target temperature, the thermostat plug stop to heat or cool. It work both receivers.This thermostats is designed for the remote control and outlets in one room (Large space), such as kitchen, living room, greenhouse，Sealed large balcony，etc..
  • 【Free to switch between ℃/℉, Easy to use and program】: Only 3-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and work well with your home device..
  • ❤️【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Maintains stable room temperature and provides comfort and energy saving. High and low temperature alarms are available, 3-Prong socket with grounded terminal, safe and reliable. The maximum load can reach 12A, 1300W. This temperature controller will help you have good reliable temperature control and lower electric bills..
Check Stock

Proshine Cartridge Filling Gun Machine Filler, Heated Handheld Portable with 2 Tubes 10 Needles

  • ...th oil, and it only takes 1 second to inject a 1ml unit. The light body allows users to use it for a long time..
  • [UPGRADED HEATING PAD]The heating pad adopts adopts the latest thermal conduction technology, which has the characteristics of fast heat conduction and accurate temperature. The pad wraps the syringe more tightly, so that the oil in the syringe can be fully heated..
  • [COMPLETE ACCESSORIES]Considering the inconvenience of purchasing accessories, we provide two tubes, 10 luer lock needles (two each for 12g, 13g, 14g, 15g, 16g), 5 plugs, a syringe adaptor, a heating pad, a temperature controller and a sealing ring..
Check Stock

KETOTEK KT8230 Digital Temperature Controller Thermostat Regulator 120VAC 30A Fahrenheit -22~572℉ Heating Cooling for Incubator Brooder Refrigerator Fermenter Greenhouse Reptile

  • 【Wide temperature range.】The range for KT8230 is -22~572℉, This is a relay temperature controller, There is no voltage output directly, you need to connect additional power supply for the load, then it can be set by differential (1~80℉) to turn on/off the load, it is like a switch..
  • 【Output is 30A relay, more accurate.】The temperature controller 120V can be used for big power equipment, like incubator, brooder, refrigerator,Fermenter,Greenhouse,etc. 1°F accuracy to keep the temperature in desired range..
  • 【Support delay start function and temperature correction.】The cooler and heater will delay to work if you set the delay time(PL: 0~7min) not 0, You can set depend on what you need. -30.0°F～30.0°F calibrate the temperature when there is error..
  • 【Safe protection.】Temperature Regulator will alarm when it exceed temperature limit or sensor error, alert you when something wrong happened. You can also set the low(LS) and high temperature limit(HS) to change the temperature range, LS < Setting Temperature < HS..
  • 【Simple operation.】 All parameters setting can be saved after restart, you don’t need to set the thermostat regulator when power off, or restart it from vacation. 2m NTC sensor allows more possibility for home.
Check Stock

Freshwater Aquariums For Dummies

  • 【Rapid Heating and Two Temperature Control System】300W aquarium heater is sutable for 40-75 gallon fish tank and made of the most stable nickel-chromium heating wire, which can quickly and stably conduct heat to the surroundings. It has a built-in temperature control system of Fahrenheit and Celsius(Temp range: 63-94℉/17-34℃). You can press and hold the button next to the controller for 2-3 seconds to switch..
  • 【Intelligent Water Sensor and Over Temperature Protection】This fish tank heater has a unique intelligent temperature and water sensor system, the heater will automatically stop heating when the heater is completely out of water or it rapidly heats beyond the set temperature, the indicator light will turn green in both cases to ensure the maximum safety of you and your aquatic organisms just like protecting our own safety..
  • 【Explosion-proof Quartz Glass Aquarium Heater】The submersible aquarium heater is made of explosion-proof quartz glass material and a high-temperature resistant nickel-chromium heating wire with silicon carbide heat conduction, faster water heating and longer lasting. And the stronger black shell is a high temperature resistan....
Check Stock

Youyoute Mini Heater for 3D Printer, Resin 3D Printer Temperature Controller Heating Thermostat Temp Control for LCD DLP 3D Printers

  • 【Use for】Resin 3D printer mini heater designed for Resin 3D printers, it is small but powerful, for use in cold weather. It helps you to heat up the resin and rise the ambient temperature. Make your 3D printer work well, save your time and Resin material..
  • 【Professional design】Our temperature controller use in cold weather,when temperature lower than 75F/24C, will cause so many problems in LCD DLP 3D print. Such as Print not sticking to the bed, Layer adhesion, warming, and so on. Finally, printing fails..
  • 【Professional design】Our 3D printer heater built in high-precision temperature sensor, accurate to 0.1 ℃. Fireproof case, high-quality power cord, all professionally designed for your safe printing..
  • 【Small size】Our 3D printer Thermostat 10.8x5.7x3.2cm/4.25x5.24x1.25 in, 117grams, Prefect for 8-15 inch Resin 3D printer, It only takes 10 minutes from 40F to 80F, for use in cold weather..
  • 【Function】3D printer air controller contains three functions, one is heating, one is Air circulation, and the other is filtering. When the temperature is lower than the set t....
Check Stock

DIGITEN Wireless Thermostat, Temperature Controller Outlet Remote Control Built in Temp Sensor Thermometer 3 Prong Plug Heating Cooling Mode for Fan Heater Greenhouse

  • 【Easy to use and program】: Only 2-step settings for your application, just plug-in and select heating/cooling system, then this temperature controller auto match and play with your home device. Widely used for attic fan, swamp cooler, evaporative cooler, space heater, wall panel heater, electric fireplace heater, garage, greenhouse, etc..
  • 【High Accuracy】: Built-in highly accurate temperature sensor, ambient temperature is detected automatically by remote controller, when current temperature reach to target temperature, the thermostat socket stop to heat or cool. High and low temperature alarms are available, the maximum load can reach 14A, 1500W.
  • 【Wireless Remotely Control】: Remotely set parameters and view temperature, no need to operate on the receiver, remote control distance can reach 50-100m (empty ground). One remote can control multiple receiver switches(only WTC100). It can save all settings even if the power failure..
  • 【Heating & Cooling Mode】: Automatically turn on/off heating devices or cooling devices through your preset target temperature. Maintains stable room temperature and provides comfort and energy saving. Free to switch between ℃/℉..
  • 【ON/OFF manual button on the receiver】: Manually turn on/off the recei....
Check Stock

Antrader KSD301 Thermostat, N.C. Temperature Control Switch Thermostat Thermo Switch for Microwave 10A, 10-Pack

  • Advantage: Contact sensor, speed dynamic type, sensitive, reliable, stable action temperature, long service life, no arc phenomenon.
  • Normally Closed: The original state of temperature control switch contact is closed, and open when the temperature sensing exceeds the rated temperature..
  • Features : temperature controller has the characteristics of small size, quick action, accurate temperature control, large current control and long service life.
  • Wide used in home appliance's motor and electrical equipment, such as air Conditioner motor, transformer, thermal appliances, etc.
Check Stock

VIVOSUN 10\x20.75\ Seedling Heat Mat and Digital Thermostat Combo Set MET Standard

  • Reliable Results: VIVOSUN’s professional heat mat maintains temperatures in the sweet spot of around 10℉-20℉ above ambient air temperature - perfect for seedling starting and cutting propagation.
  • Built to Last: The heat mat is supple, flexible and ultra-durable, VIVOSUN goes beyond stringent MET standards, with a fortified connection between mat and power cord, water-resistance that enables safe scrubbing.
  • Professional Reliability: The controller maintains a stable temperature between 68-108°F (20-42°C) for professional horticultural systems.
  • the sensor probe delivers accurate readings in both cool and warm environments.
  • Zero-effort Setup & Operation: The controller comes with a manual, but you won’t need to read it! Using 3 buttons, you can set a temperature or change the display between Fahrenheit/Celsius in seconds.
  • Compatibility & Safety Guaranteed: Compatible with any heat mat and ready to plug into North American outlets, VIVOSUN is the best choice for safe and professional heat-mat regulation.
Check Stock