Categories

Best Acrylic Thermoplastic Solvent Base

On Writing Well: Audio Collection

  • The Armor AR350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish..
  • The Armor AR350 is manufactured in the US and made from non-recycled resins..
  • The Armor AR350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer..
  • The Armor AR350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting..
  • The Armor AR350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat..
Check Stock

5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer

  • Penetrating high solids, breathable solvent based acrylic coating with unmatched bonding characteristics..
  • Durable, long lasting. Stands up to abrasion, UV rays, hot tire pick up, hot and cold temperatures..
  • Long lasting high gloss finish provides up to 2-5 years of life on a two coat application before the need for a recoat. Will bring out color in dull and faded surfaces..
  • Can be used on poured concrete, stamped concrete, concrete pavers, aggregate, and more..
  • Can be used on unsealed surfaces, or on surfaces previously sealed with a solvent based acrylic..
Check Stock

5 GAL Armor AR350 Solvent Based Acrylic Wet Look Concrete Sealer and Paver Sealer

  • The Armor AR350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish..
  • The Armor AR350 is manufactured in the US and made from non-recycled resins..
  • The Armor AR350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer..
  • The Armor AR350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting..
  • The Armor AR350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat..
Check Stock

Hilti Injectable Mortar Epoxy Hybrid adh HY 200-A - 11.1 Oz Cartridge - Pack of 25 - 3496470

  • The Armor AR350 is a breathable, non-yellowing solvent based acrylic that will darken concrete and pavers to make them look wet, and provide a long lasting, durable low gloss finish..
  • The Armor AR350 is manufactured in the US and made from non-recycled resins..
  • The Armor AR350 is self-priming and can be applied to unsealed concrete and paver surfaces, as well as surfaces previously sealed with a solvent based acrylic sealer..
  • The Armor AR350 will help to reduce damage and deterioration caused by surface abrasion such as dustring, cracking, spalling, and pitting..
  • The Armor AR350 can last up to 1-3 years on exterior surfaces and up to 3-7 years on interior surfaces before the need for a recoat..
Check Stock

LC LICTOP Clear Acrylic Plexiglass Lucite Hinge (25x34mm/0.98\x1.34\) 20pcs

  • Product Contain: 20 x Acrylic Transparent Hinges.
  • Material: Acrylic. Sturdy enough, anti-corrosion and durable..
  • Acrylic Hinges Overall size: 25 x 34mm/0.98" x 1.34".
  • Designed for solvent cementing with any acrylic sovlent/glue.
  • LC LICTOP first priority is customer satisfaction. If you have any questions about the product, please feel free to contact us. We will be the first time to help you solve the problem..
Check Stock

EnduraSeal 100% Acrylic'Wet Look' Semi Gloss Concrete Sealer Solvent Base - 5 Gallon

  • 100% pure acrylic, high performance lower odor solvent sealer.
  • Produces a semi gloss "Wet Look" to just about any type of subtrate.
  • Highly durable for a fraction of the cost of Urethane & Epoxy sealers..
  • Non-yellowing formula (Doesn't yellow the surface in time).
  • Lower odor than most solvent based sealers on the market.
Check Stock

GC America 900820 StickNET Fiber Reinforcements, 4 cm x 15 cm Bundles

  • Stick fibers are dry and they should be wetted with a light-curing resin or a heat/cold curing acrylic depending on the indication stick fibers have a porous thermoplastic polymer matrix.
  • EverStick fibers are pre-wetted and ready to use, they are impregnated with thermoplastic polymer.
Check Stock

GC America 900834 everStickCandB Fiber Reinforcements, 1 cm x 8 cm Bundles

  • Stick fibers are dry and they should be wetted with a light-curing resin or a heat/cold curing acrylic depending on the indication stick fibers have a porous thermoplastic polymer matrix.
  • EverStick fibers are pre-wetted and ready to use, they are impregnated with thermoplastic polymer.
  • For surface retained, inlay and onlay bridges.
Check Stock

GC America 900833 everStickCandB Fiber Reinforcements, 2 cm x 12 cm Bundles

  • Stick fibers are dry and they should be wetted with a light-curing resin or a heat/cold curing acrylic depending on the indication stick fibers have a porous thermoplastic polymer matrix.
  • EverStick fibers are pre-wetted and ready to use, they are impregnated with thermoplastic polymer.
  • For surface retained, inlay and onlay bridges.
Check Stock

SCIGRIP Weld-On #4 Adhesive (4 oz.)

  • SCIGRIP 4 is formulated as a blush-resistant cement for bonding acrylic to itself..
  • 2 Years Shelf Life, 1-2 Min Working Time, 3 Min Fix Time. UN 1992, PG II.
  • Used in applications like display and presentation case fabrication and medical equipment assembly..
  • Less likely to leave white marks (commonly called blushing.).
  • Used in the manufacture of numerous solvent welded structures and subassemblies using the capillary method..
Check Stock

50ml All-Glass Syringe Injector for Printer Ink Cartridge Refilling for Roland Mimaki Mutoh Printers

  • High quality Syringe Glass 50ml for Refilling Cartridges Solvent ink Wide Format Printers.
  • Solvent Resistant for refilling solvent ink, also good for water base ink.
  • This syringe air is tight and hold thin liquid good..
  • Used for All Roland, Mimaki, Mutoh printers.
Check Stock

EDOG Mossberg 500 Shotgun Schematic (Exploded View) 14x48 Padded Gun Work Surface Protector Mat

  • E.D.O.G. Cerus Gear Magnum Size Mossberg 500 (Exploded View) Schematic Cleaning Mat Only.
  • Mossberg 500 14" X 48" Magnum Size E.D.O.G. Cerus Gear Schematic Promat | Protect Your Firearm And Work Surface | Non – Slip Base | Solvent & Oil Resistant Rolls Up For Easy Storage | Hand Washa| ble –.
  • Mossberg 500 PROMAT Rolls Up For Easy Storage | Hand Washable –.
  • Protect Your Firearm And Work Surface | Non – Slip Base.
Check Stock

Brady SPC BPO500 15\ x 17\ Light Weight Economical Oil Only Absorbent Pads - 100 ct

  • Application(s) is chemical resistant sorbent for oil and solvent base liquids.
  • Provide users with a durable absorbent for cleaning up petroleum based spills and leaks.
  • These sorbents have proven to absorb liquids and repel water, and is effective in both industrial and environmental applications.
  • This chemical resistant sorbent for oil and solvent base liquids is best applied during emergency spills for fast and easy clean up.
Check Stock