Categories

Best Adafruit Pro Trinket 5v 16mhz Pieces

Electronic Component, High Clock Splitter Practical for Home for Industry

  • With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
  • Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
  • There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
  • Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..
  • Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
Check Stock

Clock Splitter, Convenient Good Performance Electronic Component for Home for Industry

  • With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
  • Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
  • There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
  • Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..
  • Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
Check Stock

Circuit Playground Classic

  • Important Note: This is the CLASSIC version of Circuit Playground. Adafruit part number 3000. The newer Express version is Adafruit Part number 3333.
  • ATmega32u4 Processor, running at 3.3V and 8MHz. MicroUSB port for programming and debugging with Arduino IDE.
  • The Circuit Playground has USB HID support, so it can act like a mouse or keyboard and attach directly to computers..
  • Green "ON" LED so you know its powered, Red "#13" LED for basic blinking.
Check Stock

Clock Splitter, Good Performance High Practical Electronic Component for Industry for Home

  • With the breakthrough for Adafruit's Si5351A clock generator, you will never look for another crystal! The chip has an accurate 25MHz crystal reference voltage source and internal for and frequency divider, so it can generate almost any frequency, from 003c8KHz to 150+ MHz..
  • There are three independent outputs, and each output can have a different frequency. Through a breadboard friendly plug or optional SMA connector, the output is 3Vpp..
  • Such convenient small chip is put on its own breakout board PCB, with 3.3V LDO regulator, so it can be powered by 3-5VDC. We also placed a level circuit on the I2C line, so you can safely use the chip under 3V or 5V logic..
  • Si5351A clock generator is an I2C controller clock generator. It uses the onboard clock to drive multiple PLLs and clock dividers through I2C instructions. By setting for and divider, you can make precise arbitrary frequencies..
  • Most importantly, we even provide excellent tutorials and libraries to help you get started! Our is designed to work for microcontrollers and IDEs, but it can be easily ported to your favorite platform through I2C support..
Check Stock

Adafruit 3915 Circuit Playground Express Enclosure

  • ATSAMD21G18 ARM Cortex M0 processor(clocked at 48 MHz and at 3.3V logic, same one in the new Arduino Zero.
  • 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much).
  • Built in USB so it has USB-to-Serial program & debug capability built in with no need for an FTDI-like chip.
Check Stock

Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

  • Same size, form-factor, and pinout as classic Trinket.
  • ATSAMD21E18 32-bit Cortex M0+, 48 MHz processor, 6x as fast as original Trinket!.
  • 256KB Flash - 32x as much as 8 KB on ATtiny85.
  • 32 KB RAM - 64x as much as 512 bytes on ATtiny85.
  • 48 MHz 32 bit processor - 6x as fast as ATtiny85.
Check Stock

Adafruit ItsyBitsy M4 Express Featuring ATSAMD51

  • The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino M0's and M4s but does not work on Uno (328P) and may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds..
  • This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!.
  • Since this is our new favoritest SPI-protocol WiFi module we've decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC..
  • There's also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They'll light up when connected to an SSID, or transmitting data..
Check Stock

Analog Discovery Systems Kit: USB Oscilloscope & Logic Analyzer

  • Two-channel USB digital oscilloscope, spectrum analyzer, and network analyzer (±25V, differential, 14-bit, 100MS/s, 30MHz+ bandwidth).
  • Two-channel arbitrary function generator (±5V, 14-bit, 100MS/s, 12MHz+ bandwidth).
  • 16-channel digital logic analyzer, pattern generator, and protocol analyzer (3.3V CMOS and 1.8V or 5V tolerant, 100MS/s).
  • Two input/output digital trigger signals for linking multiple instruments (3.3V CMOS).
  • Additional instruments including a data logger, impedance analyzer, and power supplies.
Check Stock

Bluetooth / 802.15.1 Development Tools Adafruit Feather M0 Bluefruit LE

  • Works with all of Adafruit's three basic 315MHz RF receiver modules.
  • Only a transmitter, no receiver module included.
Check Stock

KEYESTUDIO Pro Micro Atmega32U4 5V with USB Cable for Arduino Projects 1PC

  • It includes four analog inputs, five PWM pins, twelve digital inputs/outputs and hardware serial port Rx and Tx..
  • Operating voltage is 5V and working frequency is 16MHz ，and we can supply power via micro USB cable and port RAW GND (DC 7-9V)..
  • The anode of power supply board must be connected to the "RAW".
  • We also added a PTC fuse and diode to protect power supply circuit..
  • How to use: search for "KEYESTUDIO WIKI KS0503" in Google Chrome to get the wiki online tutorial for this Pro Micro..
Check Stock

Supermicro X7DA8 Intel 5000X Greencreek Extended ATX DDR2 ECC FB-DIMM Dual 771-pin LGA Sockets Motherboard

  • CPU: Dual 771-pin LGA Sockets Supports Intel 64-bit Dual-Core Xeon Processor 5000X sequence upto 3.73GHz.
  • Chipset: Intel 5000X (GreenCreek) chipset & MCH + PXH-V + ESB2.
  • Memory: 8x 240pin DDR2-667/533 DIMMs, Dual Branch Memory Bus, ECC/FB-DIMM, Upto 32GB.
Check Stock

OWC 64.0GB (4 x 16GB) PC3-14900 1866MHz DDR3 ECC-R SDRAM Memory Upgrade Kit, ECC Registered Compatible with Mac Pro 2013 (OWC1866D3R9M64)

  • 64.0GB (4x16GB) ddr3 ecc 16gb ram upgrade kit PC3-14900 1866MHz ECC-R dimm memory modules compatible with Mac Pro Late 2013 (December, 2013) Model ID: MacPro6,1 (2.7GHz 3.0GHz, 3.5GHz, 3.7GHz).
  • Product Specs – 4 x 16GB modules ram ddr3 ecc r pc3 14900 dimm 1866 mhz 240 pin memory kit. Low noise 8-layer PCB. Fully compliant with JEDEC specifications.
  • Mac pro memory 64gb compatibility – Mac Pro 2013 ram Model ID: MacPro6,1 3.7GHz 4-Core Xeon & 3.5GHz 6-Core Xeon & 3.0GHz 8-Core Xeon & 2.7GHz 12-Core Xeon.
  • Mac Pro (Late 2013) models utilize thermal enabled ECC Registered and ECC non-Registered memory, however ECC Registered and ECC non-Registered mhz memory cannot be combined..
  • OWC Memory Lifetime Limited Warranty including Advanced Replacement Program. Built to meet or exceed the toughest industry specs to provide years of worry-free service..
Check Stock

AITRIP Pro Micro ATmega32U4 5V/16MHz Module Board, Replace with ATmega328 Pro Mini Compatible with Arduino with 2 Row pin Header 10pack

  • ATmega32U4 microcontroller: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface..
  • The acceptable voltage range is 5 to 9 V..
  • On-Board micro-USB connector for programming.
  • This tiny little board does all of the neat-o tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite pro-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC..
  • This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit..
Check Stock