Categories

Best Adapter Type Attenuator

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

MDS-200A Amp 1600V Three-Phase Diode Module Bridge Rectifier Power Module Provide for Single Phase Rectification

  • Measuring power range -75 ~ +16 dBm (external RF attenuator can be extended to 100dBm).
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (6DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (10DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (40DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (20DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (30DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

Boealzhl 2W SMA DC-6GHz Coaxial Fixed Attenuators Frequency 6GHz SMA Fixed Connectors (Only 1 Pcs of 3DB)

  • Useful in a wide variety of applications including impedance matching and level control..
  • With diffrent attenuation values of fixed attenuator to be chosen from. High quality, rugged construction..
  • Suitable for microwave equipment, electronic equipment or communication systems. The use of features frequency bandwidth, low standing wave, power, stable performance..
  • Coaxial Fixed Attenuator ONLY,other accessories demo in the picture is not included..
Check Stock

USDR/USDX HF QRP SDR Transceiver SSB/CW Transceiver 8-Band 5W Ham Radio & Handhel Mic

  • 【IRF Tube】Using IRF series transmitting tube to ensure its being durable & can be used to connect to an antenna (instrument base)..
  • 【Lightweight&Cost-saving】The original QCX circuit is greatly simplified, and the installed components are reduced by 50 percent to save you the trouble of complicated transformer windings and wiring procedures..
  • 【Less Power Consumption】Thanks to the EER transmitter E-level, it boasts high power efficiency and no bulky heat sink is required..
  • 【DSP Function】Automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volume control, dBm/S-meter..
  • 【Quality Material Handling】Laser marking aluminum laser, aluminum knobs with translucent silicone buttons..
Check Stock

XLBH Optical Fiber Accessories 5PCS/Bag FC UPC Female to Male 15dB Fiber Optic Attenuator FC UPC 15db Female Male Fiber Optic Attenuator Adapter Connector

  • FAST CONNECTION: Quick assembly SC connector can provide quick and easy termination of fibers in the field.
  • EXCELLENT PERFORMANCE: fiber optic adapter has good repeatability, stable performance, high success rate and high reliability.
  • AUXILIARY EQUIPMENT: The attenuator can effectively suppress loop noise, eliminate interference, and prevent accidental damage to the main control terminal.
  • WIDE APPLICATION: optic fiber quick connectors can be widely Used for fiber optical communication system,optical distribution frame (ODF), FTTH, CATV, etc.
  • CERAMIC FERRULE: optic fiber connector built in ceramic ferrule, low insertion loss, wear resistance and long service life.
Check Stock

HMC472 Digital RF Attenuator Module DC-3.8GHz Parallel 0.5dB Step 31.5dB Attenuation Value

  • Attenuation Factor and Step Size :The HMC472 is a wideband 6-bit digital attenuator with an attenuation range of 0 to 31.5 dB and a typical step error of ± 0.25 dB..
  • Operating Frequency Range :Adopt QFN surface mount package, uses single power supply 5V, working frequency range from DC to 3.8 GHz..
  • Insertion Loss :Insertion loss is less than 2.0 dB (typical) and IIP3 is +54 dBm..
  • Objects Used :Suitable for a variety of RF and IF applications..
  • Attenuation Control Interface :Manually adjust the control through the 6-position pin header on the board..
Check Stock

MIDI Foot ControllerMeloAudio Guitar Floor Multi-Effects Portable USB MIDI Foot Controller with 10 Foot Switches2 Expression Pedal Jacks and 8 Host Presets

  • High quality Electronic components and circuit design keep your tone clear and pure. Keep the dynamics and tone of your amps sweet spot at lower levels..
  • True bypass. Running through the FX loop and controlling the amount of signal sent to the power section. Let you really push the front end of your amp for the natural feel and tone..
  • Easy-to-use passive attenuator. Passive design doesnt require any power. The LED only displays whether the pedal is on or not..
  • Set output level to minimum immediately by tapping MINIMUM footswitch On board knobs and switch provide flexible sound character..
  • DC 9V Adapter power supply. (plug polarity is positive on the barrel and negative in the center).(NOT INCLUDED).
Check Stock

Hantek 20:1 Passive Attenuator for Pico 300v Max 10Mhz Passive Oscilloscope Signal Attenuator for Automotive Diagnostics Use,HT201

  • The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products..
  • Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition..
  • Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
  • 【What you will get】 1 x HT201 Signal Attenuation.
  • 【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed..
Check Stock