Categories

Best Addressable Led Fan

Airgoo PWM ARGB Fan Hub, 8 Fan Ports with pwm Temperature Control sync with Motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Powered

  • ...EED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【Addressable RGB SYNC CONTROL】Fit for Motherboard with 3-pin Addressable RGB header(+5V, DATA, N/A, GND) , Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASROCK Polychrome Sync and SignalRGB software..
  • 【Notice!!!】: Before you place the order, please read your motherboard user manual carefully, make sure there is 3-PIN ARGB header on your Motherboard, if you are not sure, please free to contact with airgoo customer service team, we can help you check it, avoid buying a wrong product that is not suitable for you..
Check Stock

Airgoo PWM ARGB Fan Hub, 2022 New Upgrade 8 Fan Ports with pwm control sync with motherboard, 8 Addressable RGB LED Ports for 5V 3-pin Aura SYNC, Gigabyte RGB Fusion, MSI Mystic Light Sync, Sata Power

  • ...EED. If 4-pin PWM fans are connected to this fan hub, DUTY RATIO of all PWM fans can be adjusted at the same time. That is, all PWM fans will run at the same DUTY RATIO. Only speed of Fan 1(F-1) can be identified by the system..
  • 【8 Channels ARGB Hub】8 channels argb hub, connect any 5V 3-pin (+5V, DATA, N/A, GND) addressable rgb fans or addressable rgb led strips you wish to control, just plug this ARGB Fan Hub into motherboard argb header via included extension cable, sync with motherboard 5V 3-pin ARGB headers. Sata Powered, support connect more argb lightings, extended your motherboard argb headers. And Airgoo ARGB Fan Hub built-in fuses, keep your system safe..
  • 【Addressable RGB SYNC CONTROL】Fit for Motherboard with 3-pin Addressable RGB header(+5V, DATA, N/A, GND) , Compatible with Asus Aura Sync, Gigabyte RGB Fusion, MSI Mystic Light Sync, ASROCK Polychrome Sync and SignalRGB software..
  • 【Notice!!!】Before you place the order, please read your motherboard user manual carefully, make sure there is 3-PIN ARGB header on your Motherboard, if you are not sure, please free to contact with airgoo customer service team, we can help you check it, avoid buying a wrong product that is not suitable for you..
Check Stock

ARGB Splitter Cable, 1 to 3 ARGB Extension Cable, 5V 3 Pin Addressable RGB Splitter Cable with 3 Pin Connector for Computer Chassis, CPU Cooler and 5V ARGB Fan, 11.8 Inches, 2 Pack

  • Package: 2PCS of ARGB 1 to 3 splitter cable 5V 3-pin (11.8 Inches), 8PCS of 3 Pin Connectors..
  • Function: ARGB splitter cable allows to extend and connect its addressable ARGB LED or ARGB fan through a single motherboard +5V 3 pin ARGB header. Addressable RGB - ARGB Splitter Extension Cable compatible with 5050/3528 RGB LED strip lights or ARGB fans..
  • Material: Genuine new copper cores, no recycled materials..
  • ARGB splitter cable compatible with ASUS, MSI, GIGABYTE and ASROCK addressable RGB motherboards..
  • Note: Only supports 3 pin 5V addressable rgb motherboard header, does not support 4 pin 12V RGB header..
Check Stock

Zalman CNPS17X High Performance CPU Cooler w/ 4D Patented Corrugated Fin & ARGB 140mm Fan, 5 Heat Pipes, 200W TDP, 180 Air Holes, FDB Bearings, Award Winning, 5 Year Warranty (Fits Intel & AMD)

  • High Performance Cooler: Patented 4D Stereoscopic Corrugated cooling fins increase heat dissipation area by 15%. The heatsink is composed of 180 individual airflow passages that quickly move hot air outward..
  • ARGB 140mm Fan: Large 140mm addressable RGB fan move large amount of cool air into the CPU and rapidly move hot air out. The fan has a unique dual-bladed spider design that maximizes airflow performance. Supports motherboard addressable RGB sync (3-Pin, 5V).
  • Built for Advanced Cooling: Reverse DTH Technology (RDTH) is combined with an Interactive Heatpipe Transfer Design (IHD) for extreme efficiency in the heat transfer from the CPU to heatsink, resulting in extraordinary cooling performance.
  • Dimension: 140mm(L) x 100mm(W) x 165mm(H)/ Weight: 700g / Heat Pipes: 6 / TDP: 200W / Material: Copper, Aluminum / Fan Speed: 800-1500 RPM / Air Flow: 61 CFM / Max Noise Level: 29.0 dBA / Voltage: 12V Fan, 5V LED / Connector: 4-Pin PWM, 3-Pin Addressable RGB.
  • Compatibility: Intel LGA 2066 /2011-V3 /2011 /1200 /115X, AMD AM4/ AM3+/ AM3.
Check Stock

Cooler Master MasterFan MF140 Halo Duo-Ring Addressable RGB Lighting 140mm Fan, Absorbing Rubber Pads, PWM Static Pressure for 5V 3-Pin ARGB,NOT Work with 4-pin RGB or RGB+12V (Single MF140 Halo)

  • Silent Cooling Technology: Noise Reduction Technology and Sound Absorbing Materials for a quieter and longer lifespan cooling solution.PWM Fan Control: Dynamic speed adjustment between 650 rpm to 1,800 rpm, minimizing noise or maximizing airflow.
  • Duo-Ring Addressable RGB Lighting: 24 Individually Controlled ARGB LEDs for a stunning visual effect.Performance Engineered: Hybrid Static Pressure blade design to tackle resistances in CPU liquid radiator, low-noise or mesh chassis ventilation while boosting overall airflow.
  • NOTE: (1)The Addressable RGB Light function MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller( NOT included) .(2)It will NOT work with 4-pin RGB or Standard RGB+12V. (3)The ARGB connection header of this case fan is 4-position-3-pin, a 3-position-3-pin ARGB header adapter may need for some Gigabyte motherboard. Please check the ARGB motherboard of your motherboard before purchase!.
  • NOTE for Gigabyte Motherboard Owner: A Gigabyte Adapter Cable may be required to connect "MF140 Halo ARGB" to some models of Gigabyte RGB Fusion Addressable RGB capable motherboard with 3-position-3-pin ARGB Header. "Gigabyte Adapter Cable" or "Addressable RGB LED Small Controller" are SOLD SEPARATE....
Check Stock

Cooler Master MasterLiquid ML360R RGB Liquid CPU Cooler

  • Pump with 12 addressable LEDs. Radiator dimensions : 394 x 119 x 27.2mm , fan dimensions: 120 x 120 x 25 mm.
  • Intel: LGA 775 / 1150 / 1151 / 1155 / 1156 / 1366 / 2011 / 2011-v3 / 2066..
Check Stock

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable，NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock

Zalman RFD120A 120mm aRGB Cooling PC Fan with Addressable RGB LED Silent Case Cooling Fan 120mm for Computer Built-in Anti-Vibration Pads Ultra Quiet Front/Rear Double-Spectrum RGB LED Effect

  • Addressable RGB: 120mm fan with addressable sync for vivid and colorful RGB LED effects.
  • Double Ring LEDs: each fan has double LED rings on the front and back so your vivid RGB colors are visible from two angles.
  • Silent Operation: Rugged plastic housing with hydraulic bearings and installed anti-vibration rubber pads for smooth and silent operation.
  • Max fan speed: 1,500 RPM, Max Airflow: 34.34 CFM, Max Noise: 25.6 dB(A).
  • Has 3-pin power connector and 3-pin ARGB connector. Gigabyte motherboard converter included..
Check Stock

EZDIY-FAB RGB Dual Ring 120mm Case Fans,5V Motherboard Sync,Speed Adjustable,RGB Sync Fan with 10-Port Fan Hub X and Remote-5 Pack

  • 16 Leds with true RGB with 16.8 million colors to light up your build with nearly endless customizable combinations.
  • 9-fan blade, support speed regulation, adjust brightness, intelligent color matching by wireless remote control..
  • 8 shockproof pads ensure that the fan will not vibrate when it is running..
  • Sync RGB lighting via motherboard:- MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!).
  • With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.
Check Stock

EZDIY-FAB RGB Dual Ring 120mm Case Fans,5V Motherboard Sync,Speed Adjustable,RGB Sync Fan with 10-Port Fan Hub X and Remote-3 Pack

  • 16 Leds with true RGB with 16.8 million colors to light up your build with nearly endless customizable combinations.
  • 9-fan blade, support speed regulation, adjust brightness, intelligent color matching by wireless remote control..
  • 8 shockproof pads ensure that the fan will not vibrate when it is running..
  • Sync RGB lighting via motherboard:- MUST BE work with an Addressable RGB(+5V, 3-pin) capable motherboard or an Addressable RGB(+5V, 3-pin) controller(Please check the ARGB motherboard of your motherboard before purchase!).
  • With EZDIY-FAB Fan Hub X and 21-key remote:You can instantly adjusting LED back-light effects, colors, brightness and Fan speed.
Check Stock

Apevia TL612L2S-RGB Twilight 120mm Silent Dual-Ring Addressable RGB Color Changing LED Fan with Remote Control, 28x LEDs & 8X Anti-Vibration Rubber Pads w/ 2 Magnetic Addressable LED Strips (6+2-pk)

  • Apevia 120mm Silent Case Fan w/28x Addressable RGB Color Changing LED Lights (16 Outer Ring / 12 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side) & 2 x 12" Magnetic with Adhesive Tape Color Changing LED Strips.
  • Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
  • Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
  • 120mm x 120mm x 25mm. Fan Speed: 1350 +/- 10% RPM. Air Flow: 57.67 CFM. Low Noise Level: 24.7 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included. Comes with 2 Magnetic Addressable LED Strips..
  • High quality control standards provide reliability and extended use of the fans..
Check Stock

Pccooler GI-D56A CPU Cooler Dawn Series | Silent PWM RGB Fan 120mm | E-Sports Plexiglass Top Cover Sync with ARGB Lights | 5 Heat Pipes | TDP160W Super Heat Dissipation for Intel i7/i5/i3, AMD Series

  • 【Full Function Addressable RGB PWM Silent Fan】Full function 120mm 5V 3Pin addressable RGB, 12V 4Pin PWM fans adopt silentPro blades design with Corona LED frame to increase air convection efficiency and greatly improve heat dissipation. Stable operation and reduce noise. The fan supports for automatic speed control, at 1000~2000±10%RPM. Shockproof rubber pads keep the fans quieter..
  • 【Definable RGB LED Acrylic Top Guard Sync with FRGB Fan and Motherboard】Definable RGB LED acrylic top guard, syncs with FRGB addressable version, protects heat pipes from damage. Sync with the FRGB fan lights or motherboard like rainbow, stylish and cool, full of personality. It can be also switched to solid light mode. Include RGB controller, 6 different solid colors and 10 lighting modes controlled by remote controller, unlimited changes..
  • 【Black Plating Anti-oxidation Protective Layer】GI-D56A HALO FRGB cpu cooler with black plating anti-oxidation protective layer, ensure light transmission and avoiding glare. Soft light and clear vision, acrylic has excellent weatherability, high surface hardness and surface gloss, as well as good high temperature performance. Acrylic stability is good, resistant to a variety of chemical corrosion..
Check Stock

Thermaltake Pure 14 ARGB 5V Motherboard Sync/Analog Controller 16.8 Million Colors 9 Addressable LEDs 140mm Hydraulic Bearing Case/Radiator Fan 3 Pack CL-F080-PL14SW-A ARGB Black

  • Synchronized your gaming station - Control fan lighting with select 5V addressable RGB motherboards. Supported motherboard software includes as US....
  • Analog ARGB controller - low-profile controller included for users without RGB Cable motherboards. Choose from 8 Preset colors (red, yellow, green,....
  • Rgb LED Ring - Nine 16. 8 million colors addressable LEDs provide balanced lighting coverage and brightness..
  • 9 fan blade design - designed for balanced air flow and static pressure, Perfect for case or radiator applications..
  • Cooling expansion - maintain unified LED lighting when pairing with the water 3. 0 ARGB Series All-in-One coolers for push-pull radiator....
Check Stock