Categories

Best Adhesive For Plastics

3M Fastbond Contact Adhesive 30NF, Neutral

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

3M (MMM8061) 3M Plastic and Emblem Adhesive, 5 oz. Tube

  • Emblem bonding adhesive bonds fully cured automotive paints and plastic for interior and exterior applications.
  • Strong adhesion resists environmental exposure such as water and heat.
  • Quick-acting adhesive sets in about 15 minutes and fully cures in 24 hours.
  • Adhesive dries clear for bonding transparent or translucent plastics.
  • Strong-adhesive properties create a permanent bond.
Check Stock

3M Fastbond Contact Adhesive 30NF, Neutral, 1 Quart Can

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

3M Fastbond Contact Adhesive 30NF, Green, 1 Gallon Can

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Bonding, adhering, gluing, joining and attaching.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

C.R. Laurence 3M 8061 CRL Clear 3M Plastic and Emblem Adhesive

  • Emblem bonding adhesive bonds fully cured automotive paints and plastic for interior and exterior applications.
  • Strong adhesion resists environmental exposure such as water and heat.
  • Quick-acting adhesive sets in about 15 minutes and fully cures in 24 hours.
  • Adhesive dries clear for bonding transparent or translucent plastics.
  • Strong-adhesive properties create a permanent bond.
Check Stock

3M Fastbond Contact Adhesive 30NF, Neutral, 5 Gallon Drum (Pail)

  • Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other.
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range.
  • Adhesive can be applied by spray, brush or roller.
  • Color changes from white to clear when dry.
  • Creates a very high strength, high temperature resistant bond with up to a 4 hour bonding range.
Check Stock

3M Plastic Emblem and Trim Adhesive, 03601, 1 fl oz

  • Bonds fully cured automotive paints and plastic for interior and exterior applications.
  • Strong adhesion resists environmental exposure such as water and heat.
  • Quick-acting adhesive sets in about 15 minutes and fully cures in 24 hours.
  • Adhesive dries clear for bonding transparent or translucent plastics.
  • Strong-adhesive properties create a permanent bond.
Check Stock

West System 655-8 G/flex Epoxy Adhesive, two 4.5 fl oz.

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/Flex Epoxy Adhesive, Two 1 qt & Dynatron 3 Pack Spreaders, 358

  • Product 1: EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • Product 1: IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • Product 1: OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • Product 1: BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes an....
Check Stock

3M 950 Clear Adhesive Transfer Tape 1 Width x 5yd Length 1 roll

  • Laminating adhesive for foams, photos, fabrics, metal or plastic nameplates..
  • Medium temperature resistance up to 250 deg F short term..
  • High and low surface energy plastics textured plastics, foams, fabrics, and coated papers..
  • General purpose holding and mounting applications.
Check Stock

WEST SYSTEM - 655-2QT West System 655-2 QT G/flex Epoxy Adhesive, two 1 qt

  • EXCELLENT ADHESION adhesion to hard-to bond woods. This toughened, versatile, thickened epoxy is for permanent waterproof bonding of fiberglass, ceramics, metals, plastics, damp and difficult-to-bond woods. A bit more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. Makes structural bonds that can absorb the stress of expansion, contraction, shock, and vibration..
  • IDEAL FOR BONDING dissimilar materials. Mixed at a 1:1 ratio, this 2-part epoxy gives you 46 minutes of pot life at 72°F and an open (working) time of 60-75 minutes. It reaches an initial cure in 3 to 4 hrs, workable cure in 7-10 hours, and full cure in 24 hours..
  • OFFERS GREATER FLEXIBILITY than traditional epoxies or polyester resins. Yet it is much stiffer than adhesive sealants. With a modulus of elasticity of 150,000 PSI, this epoxy bonds tenaciously to a metals, plastics, glass, masonry, and fiberglass..
  • BONDS MANY MATERIALS including dissimilar ones. G/flex has a superior grip so that it can be used to bond to metals, plastics, glass, masonry, and fiberglass. G/flex is ideal for repairs to aluminum boats and polyethylene and ABS canoes and kayaks. It can also be used to wet out and bond fiberglass tapes and fabrics..
Check Stock

3M X-Series Hi-Tack Transfer Tape XT2105, 2 in x 60 yd (Case of 24)

  • High tack, soft acrylic adhesive is made without use of solvents.
  • Provides high initial adhesion for attachment to most lightweight materials, including papers, chipboard, plastics and metals.
  • Adhesive provides UV and chemical resistance.
  • Fibered adhesive transfer tape reduces edge picking, improves roll stability and reduces the likelihood of unwanted adhesive transfer.
Check Stock

Goo Gone on the Go Pen - Adhesive Remover - Quickly Removing Stubborn Stickers Crayon Tape and More

  • Spot Remover - Perfect for quickly removing crayon and other stains from your clothing or surfaces.
  • Adhesive Remover - Remove adhesive residue from your surfaces on-the-go with ease.
  • Great Travel Accessory - Convenient size is designed for travel and tight places.
  • Works On - Gum, stains, stickers, adhesive, adhesive residue and more.
  • Safe To Use - On ceramic/porcelain, finished wood, painted surfaces, glass, grout, metals and plastics.
Check Stock