Categories

Best Adjustable Base Jack

AME 13121 Aluminum Jack (55 Ton 6\ Stroke with New Saddle and)

  • DURABLE FOUNDATION JACK POSTS: Old houses and natural disasters often lead to cracked floor joists, rotting support beams, and sagging porches or decks.
  • Pick up the slack by fortifying your home structures with the BISupply Adjustable Jack Posts Basement Floor Joist Support Jack.
  • These house leveling jacks are easy to install and adjust and are designed for stabilizing and supporting beams and joists during construction and repairs.
  • BUILT TO LAST: Constructed of heavy-duty steel and red oxide finish, these foundation leveling jacks are built for strength, durability, and longevity with a resistance to rust and corrosion.
  • Each house screw jack post features a 3-inch diameter base post that is welded to the bottom plate and includes a screw jack pole and turning bar with a large top plate.
  • ISO9001 certified for strength and durability.
  • ADJUSTABLE FLOOR JACK POST: Use the turning bar and screw bolt to adjust the height of the basement post jack from 12 inches to 16 inches (30.5 to 40.7 cm) for different height requirements.
  • The jack extends telescopically for temporary leveling, bracing, and stabilizing your floor beams or roof trusses.
  • MAXIMUM WEIGHT CAPACITY: Min and max heights offer up to 9,700-pound (4,400 kg) weight capacity.
Check Stock

AKRON PRODUCTS C-4 Floor Jack, 1 Pack

  • [Make Structural Repairs]: The BISupply Adjustable Shore Jack Post House Support Jacks 1-Pack transforms 4x4 inch (10.2 cm) square lumber into a temporary support or non-primary support (not intended for permanent installation).
  • [Adjust the Size]: Fits bottom of a 4x4 inch timber post of any height.
  • 4-inch height adjustment thread for shoring tension.
  • 14.5 to 18.5 inch (36.8-47 cm) overall lifting shore height.
  • 3.5x6 inch (8.9x15.2 cm) base plate with (4) 0.6-inch/15mm and (2) 0.3-inch/8mm mounting holes.
  • [Built to Last]: Constructed from coated steel for strength and longevity that resists rust and corrosion.
  • Square tube, round tube, and threaded plate welded to create singular floor joist jack post unit.
  • Load capacity up to 24,700 pounds / 12.4 ton (11,204 kg / 11.2 MT) dependent on 4x4 used.
  • [Stabilize Easily]: Place adjustable shoring jack on end of 4x4 inch wood post, secure post to shore jack, turn the tension handle for 4 inches of height adjustment, and secure 4x4 shore jack base (4x4 lumber required, not included.
  • nails/wood screws recommended, not required or included).
  • [Fit Anywhere]: 11.8x0.4 inch (30x1 cm) horizontal tension handle is removable and slides for use against an obstruction.
  • Base plate includes (4) 0.6-inch/15mm and (2) 0.3-....
Check Stock

BESTOOL Jack Stands 4 ton Jack Stand with Security Locking Pins, 8,000 lbs Capacity, 1 Pair, Black

  • BESTOOL jack stands uniquely designed circular base pads flat top rubber saddle protects the car frame better than the traditional curved axle post jacks stands. Provide maximum stability and safety, non-slip pad can be disassembled, replaced..
  • This car jack stand features mobility pin height adjustment mechanism provides 7 adjustable positions. Making it flexible for all of your needs and provides added security..
  • The rubber circular base pad protects against scratching paint. Stand has a powder coated finish to prevent rusting.The minimum height of this jack is 13.4 inches and the maximum height is 19.9 inches with a 4 ton (8,000 lb) load capacity..
  • Jack stands 4 ton constructed of high-grade forged steel with a welded frame design for durability.Wide pyramid foot base provides added strength and stable support..
  • This jack stand is perfect for modern low ground clearance cars. it handles a wide range of vehicles including small cars, SUVs, and light duty trucks, jeeps, ATV's, UTV's, and more..
Check Stock

11.5\ x 11.5\ Off-Road Hi-Lift Jack Base and Stabilizer - Keep Jacks from Sinking with Heavy-Duty Plastic Jack Stand Base for Lifting Jacks and Farm Jacks with 4.1\ x 7\ Base

  • Watching the jack constantly sinking on the ground is one of the most frustrating feelings in the world so is trying to work on a jack that can't just get traction on the muddy and slippery ground. But there's no reason to just grin and bear it. This Hi-Lift Jack Base and Stabilizer serve a simple yet vital purpose of stabilizing off-road jacks. Mount your Hi-Lift jack on the base and watch it conquer sand, gravel, mud, and snow!.
  • MEETS OEM SPECIFICATIONS - OEM-quality with an affordable price. This jack stand base meets and even exceeds both OEM and Hi-Lift Jack specifications on strength, durability, and safety..
  • COMPATIBLE WITH LIFTING JACK AND FARM JACK BRANDS - If your off-road or farm jack has a 7 inches x 4 inches base, then you're good to go. With the exception of Hi-Lift Post Popper, this off-road jack base is suitable for several Hi-Lift off-road jacks including Hi-Lift All-Cast Jack, Hi-Lift Cast/Steel Jack, Hi-Lift X-Treme Jack, Hi-Lift UTV Jack, Hi-Lift Patriot Edition Jack, and Hi-Lift Jack Ej550 Equipment/Agriculture Jack..
  • HIGHLY STABLE OFF-ROAD BASE WITH RUGGED CONSTRUCTION - Rugged and durable, this jack can withstand extreme weather and a wide variety of surfaces. The base's bottom has a textured pattern designed for a more solid grip....
Check Stock

Auto Jack Ratchet Handle, Auto Labor-Saving Jack Ratchet Wrench with Long Handle, Scissor Jack Lift Speed Handle Tool Jack Lug Handle Tool Tire Wheel Jack Wrench, Universal 360° Swivel Car Repair Tool

  • Jack Screw Set: With a weight capacity of 1000 pounds, the bases can be stacked and combined for cylindrical applications or narrow edges and slots.
  • Extendable Base: Includes 1" and 2" extension bases that can be combined.
  • adjustable with the pivotal top or a single contact point extension.
  • Dimensions: Machinist jack screw set has a range of 2.25" to 3.375" before extension use.
  • Set Includes: Screw jack set includes screw jack, two optional bases, 1" and 2" extension, locking bar, optional support and fitted case.
Check Stock

Stanley 46-053 Premium Adjustable Quick Square Layout Tool

  • This Adjustable Quick Square Layout Tool has a base length of 10-3/4" and a rule length of 6-3/4".
  • Heavy-duty aluminum construction for durability.
  • Black body with yellow graduations provides maximum readability in all light conditions.
  • Features Common, Jack and Hip, and Valley scales for various applications.
  • Multipurpose, adjustable design can be used as a saw guide, bevel or protractor.
  • Multipurpose, adjustable design can be used as a saw guide, bevel or protractor. Comes with an adjustable arm.
Check Stock

Powerbuilt Alltrade 640912 Black 3 Ton, All-in-One Bottle Jack & Big RED T43202 Torin Steel Jack Stands: 3 Ton (6,000 lb) Capacity, Red, 1 Pair

  • Product 1: Dimensions: 9.75"L x 9.75"W x 12.25"H. Patented design combines jack stand and bottle jack in one unit.
  • Product 1: Safety bar locks unit at desired height. This jack is for trucks and off road type vehicles.
  • Product 1: Portable jack designed to safely Lift and hold both Regular and unibody cars and trucks.
  • Product 1: Highly durable. Wide steel base for stability under load. Height range is 11 inch to 21 inch, but its default lift range is 11 to 17.25 inch, it can be raised to 21 inch if adjusted manually.
  • Product 2: Lightweight jack stands are used to support your vehicle after lifting with a jack.
  • Wide pyramid foot base provides added strength and stable support.
  • Product 2: Constructed of high-grade forged steel with a welded frame design for durability, it handles a wide range of vehicles including small cars, SUVs, and light duty trucks.
  • Product 2: Adjustable height ranges from 11-1/4" to 16-3/4" with a 3 ton (6,000 lb) load capacity.
  • Product 2: Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place.
Check Stock

Jack Boss Car Jack Stands 2 Ton 4,400 Lbs Capacity Steel Car Lifting Stand Adjustable Jack Stand for SUV MPV Truck RV 2 Pack

  • ...oated to prevent rust and the paint is evenly applied and glossy.
  • [Safety Top Surface]Top saddle has large concave shape contact surface area,providing the load perfect support.Heavy duty jack stands can relieve the pressure on the tires and get enough room and safety underneath the vehicle to do any repair for you.
  • [Adjustable Sawtooth Design]Multi-position ratchet bar with ductile iron is designed as sawtooth style for adjusting to the proper locking position fine and engage with the bar deep in its place and removal quickly.Floor jack stand equiped with hand self-locking to support the load solidly.Keep you safe well.
  • [Stable Base and After-sales ]Wide pyramid foot base of jack stand provides more strength and stability.Thick and sturdy but not overly heavy.Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty.If you have any questions,please feel free to contact us,we will be the first time to solve for you.
Check Stock

TCE AT82001U Torin Hydraulic Trolley Service/Floor Jack Combo with 2 Jack Stands 2 Ton 4,000 lb Capacity Blue

  • Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most....
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8".
  • Equipped with a safety bypass system prevents over-loading and ensures safe operation.
  • built-in carrying handle allows the floor jack to be lifted....
  • Jack stands feature an adjustable height that ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity.
  • Each jack stand has a large saddle surface area for better contact with the load being supported.
  • A wide pyramid foot base provides added strength and....
Check Stock

BUNKER INDUST Offroad High Lift Jack with Pair Traction Board Mate,48" FarmJack with Sand Mud Snow Track Mat Board,4x4 4WD Offroad Tire Recovery Kit for Car Truck Jeep ATV SUV UTV

  • ...-plated hardware standard on all jacks.Unique gold zinc-coated winch/clamp/spreader attachment ensures the greatest rust resistance from extreme use for all the hardware.The traction mat is made of UV-stabilized, flexible, super tough engineering-grade reinforced nylon.
  • 【Adjustable High Lift Jack】With quick release spring loaded pin, this jack allows you to set the height what you need. The maximum lifting height is 107CM.The largest capacity of high lift farm jack is 3Ton (7000LB).For greater safety, this lifting jack is equipped with a shear bolt which prevents the jack from being used on loads greater than 7000 pounds.The traction mat is 10 tons capacity on flat ground.
  • 【Lift your 4WD out of any Situation】High Lift Farm Jack 48" with Recovery Tracks is more professional and better for off-road travelling 4x4. Lift, push, or pull equipment, small buildings and trucks.Also, it is great for farm use,use for fence work, winching, removing stumps, and dozens of.
  • 【2 Pcs Traction Mat with Jack Lift Base】 Superior ramp design and unique shovel feature of this traction mat to get you out of the mud, snow, sand or....
Check Stock

Jack Boss Car Jack Stands Low Profile 2 Ton 4,000 Lbs Capacity Steel Car Lifting Stand Adjustable Jack Stand for SUV MPV Sedans 1 Pair

  • ...oated to prevent rust and the paint is evenly applied and glossy.
  • [Safety Top Surface]Top saddle has large concave shape contact surface area,providing the load perfect support.Heavy duty jack stands can relieve the pressure on the tires and get enough room and safety underneath the vehicle to do any repair for you.
  • [Adjustable Sawtooth Design]Multi-position ratchet bar with ductile iron is designed as sawtooth style for adjusting to the proper locking position fine and engage with the bar deep in its place and removal quickly.Floor jack stand equiped with hand self-locking to support the load solidly.Keep you safe well.
  • [Stable Base and After-sales ]Wide pyramid foot base of jack stand provides more strength and stability.Thick and sturdy but not overly heavy.Meets ANSI/ASME PASE safety standards and includes a limited 1 year manufacturer warranty.If you have any questions,please feel free to contact us,we will be the first time to solve for you.
Check Stock

Torin 3 Ton 6,000 LBs Capacity Aluminum Jack Stands 2 Pack Black/Silver AT43004B

  • Lightweight jack stands for supporting vehicles after lifting with a jack.
  • Handles a wide range of vehicles including small cars, ATV's, UTV's, and....
  • Removable locking support pins provide added security and stability and is equipped with 6 locking positions.
  • Adjustable height ranges from 10-3/4" to 15-5/8" with a 3 ton (6,000 lb) load capacity.
  • Saddle has a large surface area that provides better contact....
  • Wide foot base provides additional steadiness.
  • Base is removable, allowing for compact storage when not in use.
  • Meets ASME Safety Standards and includes a limited 1-year manufacturer warranty.
Check Stock

Xenyem 1300lbs 2 Stage Telescopic Transmission Jack w/ 360°Swivel Wheels Lift Hoist, Adjustable Height Telescoping Transmission Hydraulic, w/Pedal, 35\ to 70\ Lifting Range - Yellow

  • Increased load capacity - hydraulic jack load capacity from 1100 lbs (0.5 tons) to 1300 lbs (0.6 tons).
  • Upgraded Version - upgraded with dual spring, higher pressure, increased the stability and load capacity,as well as the lift speed than single spring..
  • Adjustable - Featuring a telescoping 2-stage hydraulic ram, the transmission jack can be extended from 35.43" to 70.86" in height..
  • Stability and Ease of Movement - Wide heavy duty four foot base and 4 cast iron swivel 360 degree casters, auxiliary ring in the middle of the transmission jack and cast iron swivel casters add ease of movement and greater maneuverability..
  • Precise Positioning - The adjustable saddle provides a wide tilt range to help you place the load in the perfect position. The pallet can be tilted up to 30 degrees. Adjust the angle and position you need by twisting the adjusting bolt, allowing you to position and align the transmission more precisely..
  • Material - The hydraulic jack is constructed of high grade steel for quality and durability. The painted surface prevents rusting..
  • Application - The floor jack can be used in many places, including automotive transmissions, auto repair stations and other objects weighing up to 600KG..
Check Stock