Categories

Best Adjustable Chucking Reamer Holder

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

uxcell 3/8\ 5/8\ 1/2\ 3/4\ Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool 4pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

TTC .124 -.501 14 Pc Over/Under HSS Straight Flute RH Chucking Reamer Set

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

Prolinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes

  • Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
  • Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs

  • Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
  • tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
  • Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
  • Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
  • Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
  • How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock

8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm

  • Type- Straight Flute Chucking Reamer Bits.
  • Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
  • Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
  • Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check Stock

Reamer Set, 10Pcs HSS H7 Machine Cutter Straight Chucking Milling Reamer Kit, Reamer Metric, Milling Machine Cutter, Reamers for Metal 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm

  • 0.196" diameter (+.0003"€/-0"€) carbide tipped chucking reamer.
  • 1 1/8" length of flute with 1/2" carbide length.
Check Stock

uxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs

  • The reamer range is 15/32 inch to 1-1/2 inch..
  • Product includes 11Pcs high speed adjustable hand reamers H4-H14..
  • The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
  • Adjustable reamer is straight flute with straight handle..
  • The reamer is suitable for drilling machines and other machine..
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock