Categories

Best Adjustable Depth Hole Cutter

Big Horn 19317 Contractor Grade Adjustable Block Plane

  • Features: 6-1/4" contractor grade block plane with a 1-3/8" cutter.
  • Fully adjustable cutter blade rests at 13.5 degrees | adjustable knob for angle setting.
  • Low blade angle for face grain & end grain | adjustable mouth knob for different types of woods.
  • Cutter blade is fully adjustable for depth of cut and alignment.
  • Adjustable knob for depth of cut blades adjustment.
Check Stock

EZARC Carbide Hole Cutter for Thick Metal Deep Cut Hole Saw for Stainless Steel Metal Pipes and Hard Material CHS-25M 3/4 19mm

  • ✌【Fast & Precise Cuts 】The increased hardness of the carbide technology and optimized tooth geometry allow our hole saw to provide superior....
  • ✌【Various Application】 Cutting depth of 1-inch makes this stainless steel hole cutter easy to pass through a variety of home decoration and....
  • ✌【Effortless Operate】 Our carbide hard metal cutting hole cutter has a chip groove and deploying hole design, which can effectively remove chips....
  • ✌【Safe & Durable Design 】EZARC metal plate hole saw cutter uses variable teeth technology with 3 distinct cutting edge to balance the cutting....
  • ✌【SATISFACTORY SERVICE】 Always committed to do our best to make sure our customers are satisfied about the purchasing of carbide hole saw from....
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

  • Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
  • Use these countersinks to drill the pilot hole and countersink hole in one step..
  • 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
  • Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
  • Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock

Digital Height Gauge Depth Gauge Woodworking Depth Measuring Ruler with LCD Display for Carpenter Woodworking Tool for Router Table (0-80mm)

  • MEASUREMENT MAINTAINING: The steel locking screw can help to lock the ruler to maintain the measurement. The measured values can also be converted between inches and millimeters.
  • QUIKCLY AND HORIZONTALLY: Digital LCD screen, can read quickly horizontally and vertically. Applicable to manual router and router table.
  • CONVENIENT MAGNETIC USE: This magnetic self-supporting is convenient for foot-vertical measurement. Using free standing magnetic feet, vertical measurement is more accurate.
  • ADJUSTABLE BACK FOR HEIGHT: Self-supporting, the cutter depth can be set on the router planer table, and the back can be adjusted for height.
  • MULTI-FUNCTION PIUNGER HOLE: Easy to adjust distance to achieve height measurement, multi-function plunger-hole / slot depth measurement.
Check Stock

Levenger Circa Leverage Punch (ADS6190)

  • 1, Punch Hole Size and Capacity-The diameter of the punched hole is 5.5 mm. The feed depth of paper is 7 mm. And you can punch 6 sheets of paper at one time.
  • 2, Adjustable Punch Hole Space -This 6-hole paper puncher hole space can be adjusted at 4 positions(19mm-38mm-51mm-70mm), That is A7-A6 agenda-A6 personal-A5 hole space. A stretchable marked scale ruler can help you to fix different size paper, make the punch work more accurate.
  • 3, Wide Application-This A5 A6 A7 6 ring punch can be used to punch your dairy planner, personal, agenda and other binder refill pages. It is perfect for you to organize your planners at office or at home.
  • 4, Premium Quality and Great Gift Choice-Our planner puncher is made of heavy metal, durable, firm and rustproof. This elegant and black 6-hole puncher is a perfect present for your friends, families and colleagues.
  • 5, Ergonomically designed and Labor-saving-You can punch holes with less effort due to the lever structure of the all-metal puncher and the U-shaped metal sharp cutter head. The plastic non-slip base cover also can hold punched scraps that you can clean the punched scraps by simply opening it.
Check Stock

EZARC Carbide Hole Cutter Heavy Duty for Stainless Steel, 3/4 Inch 19mm

  • 【 Extremely Long Life 】Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】The carbide technology and optimized tooth geometry make EZARC hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】Provide fast and precise cuts into 1/5-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】This hole cutter can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Dimension 】Cutting diameter : 3/4-inch(19mm), cutting depth : 1/5-inch(5mm), chunk size: 2/5-inch(10mm)..
Check Stock

Jonard Tools AHC-10 Professional Grade Round Hole Saw Cutter Includes Dust Shield and Case Cuts Plywood Plasterboard Sheetrock Acrylic Up to 1 1/16” Thick Adjustable Hole Size 2.2” to 10”

  • WHAT’S IN IT: Adjustable hole saw cutter, polycarbonate dust shield, rugged case.
  • VERSATILE USE: Cuts round holes in plywood, sheetrock, plasterboard, and acrylic sheet up to 1 1/16” (2. 7 cm) thick and can be used with any....
  • ADJUSTABLE SIZE: Cuts hole sizes from 2. 2” to 10” (55 mm to 254 mm) and cutting depth is up to 1 1/16” (27 mm) with adjustable hex locknut and....
  • SAFE OPERATION: Tool has a compression spring that absorbs vibrations while cutting and polycarbonate transparent dust shield collects dust and....
  • HIGH DURABILITY: Rubber gasket provides surface protection against damage, tight seal against flat surfaces, and prevents fallout from debris.
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock

GROWORD Armored Fiber Optic Cable Stripping Tool SI-01,Longitudinal & Window Cable Peeler, Mid Span Cable Stripper with Adjustable Cutting Depth,2/5' to 1' Diameter (2 spare blades)

  • ➽【Adjustable blade】: With adjustable design, the depth of the cutter head can be controlled by adjusting the nut. One circle of the nut is 1mm, and one circle has 4 gears, and each gear is 0.25mm. There is a clear scale on the cutter head, you can clearly see the depth of the cutter head..
  • ➽【High-quality material】: The blade is made of high-grade aluminum alloy casting, and the cutter head is precision polished with high-quality materials, which can cut into the cable sheath easily and effortlessly.The sturdy structure and robust cutting blade can strip the harder cable sheath, which is difficult to accomplish with other tools..
  • ➽【Slip handle】: The handle is designed according to ergonomic principles, with a comfortable grip and easy operation.Will not be tiring after long time use..
  • ➽【Wide use】: This cable stripper can cut sheaths of various materials. Such as PVC, PE, steel armor sheath and non-metallic reinforced component fiber optic cable sheath, etc. Suitable for optical cables with 2 cores-288 cores and cable diameters between 2/5" and 1" (10-25mm)..
  • ➽【Easy operation】: Adjust the cutter head to a proper depth, place the cable in the slot, firmly hold the handles on both sides of the cable opener, insert the cutter hea....
Check Stock

TCT Hole Saw Set, 16-53mm Tungsten Carbide Tipped Hole, 13 Pcs Carbide Hole Saw Kit with Titanium Plated Pilot Drill Bit for Stainless Steel, Metal, Iron, Wood and Aluminum

  • Safe & Durable: This carbide hole saw set uses variable teeth technology with 3 distinct cutting edge to balance the cutting and make the blades more durable, sharp and more efficient for cutting hard metal..
  • Fasting Cutting: Carbide technology and optimized tooth geometry make hole cutter cut fast in most applications. This carbide hole cutter can precisely cut very smooth holes due to the concentricity rate..
  • Wide Application: 1/2 inch cutting depth makes this stainless steel hole cutter easy to pass through thick material such as: thick metal, stainless steel, iron pipes, aluminum, brass and sheet metal plate..
  • QUALITY MATERIAL: Our hole saw set are Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), Top-grade Titanium-plated cemented carbide Teeth ensures its high hardness, rust proof, sturdy and durable..
  • PACKAGE INCLUDES: The package includes 13 Pcs carbide hole saw: 16mm(5/8”), 18mm(45/64”), 20mm(25/32”), 22mm(55/64”), 25mm(63/64”), 26mm(1-1/32”) 28mm(1-7/64”), 30mm(1-3/16”), 35mm(1-3/8”), 40mm(1-37/64”), 45mm(1-49/64”), 50mm(1-31/32”), 53mm(2-3/32”). A variety of sizes to meet your different needs..
Check Stock

Luomorgo 1 3/16\ to 12\ Adjustable Hole Saw Circle Cutter Drill Bit Tool Saw Round Cutting for Drywall Wood

  • Package Includes: 1 x adjustable hole saw cutter, 1 x drill bit, 1 x hex wrench.
  • Cutting Hole Diameter: 1-3/16" - 12"(30 - 300mm), Cutting Depth: 1/8 "-2"(3 - 50mm), Shank Diameter: 3/8" (10mm).
  • Widely Used: Can be used to cut a variety of materials, such as plywood, laminate, composite materials, rubber, plastic, etc.
  • Sturdy & Durable: Use high quality carbon steel for long life. The valve body has a clear scale for fast measurement and precise cutting.
  • 100% Risk-Free Shopping: If you are not satisfied with any Luomorgo products, we have nothing to ask and let you enjoy a full refund. Because we want our customers to enjoy a 100% satisfied shopping experience..
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • ...wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink drill bit for wood with tapered drill bits. Wood countersink bit with wider flute shape for increased chip flow. Drill bit set with logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Tapered drill bit for wood countersink set, drill bits Secured with Pin. FTG 4TO12P Maximum Torque countersink drill bits with countersinks for wood.
  • STORAGE CONTAINERS are available on this page at section "Make it a bundle". Counter sinker drill bit set designed in Bloomfield, New Jersey by Fair Trade Group USA and Professionally manufactured in China at FTG USA specs. Analys....
Check Stock