Categories

Best Adjustable Depth Stop Hole Saw

TCT Hole Saw Kit, LAIWEI Carbide Stainless Steel Hole Saw, Electric Metal Drill Saw, Tungsten Alloy Hole Cutter, Carbide Tipped Hole Saw Drill Bit Tungsten Carbide Tipped Hole Saw Drill Bit (14pcs)

  • ⭐ Hole Saw ----- LAIWEI TCT Hole Saw Kit (Carbide Hole Saw) Includes 10 Hole Saws: 16mm Hole Saw, 18mm Hole Saw, 20mm Hole Saw, 25mm Hole Saw, 30mm Hole Saw , 35mm hole saw, 45mm hole saw, 50mm hole saw, 55mm hole saw, 60mm hole saw and 2 drill bits and wrenches..
  • ⭐ Carbide Stainless Steel Hole Saw ----- Sharp tungsten alloy blade can easily cut steel, iron, aluminum, copper and cast iron. The depth of cut reaches 25 mm..
  • ⭐ Drilling --- Spring pilot drill removes chips and saves time. The hole knife cuts cleanly without burrs..
  • ⭐Precautions for electric drill air saw: Use perpendicular to the parts, use cutting oil when cutting metal materials, and start cutting at low speed. Stainless Steel Hole Saw -: Under normal conditions, this tool will last longer than other hole punching tools..
  • ⭐Stainless Steel Hole Saw--: Under normal conditions, this tool will last longer than other hole punching tools..
Check Stock

Patioer Hole Cutter, 1-5/8" to 8" (40-200mm) Adjustable Hole Saw Cutter, with ABS Dust Shield for Recessed Lights, Ceiling Speakers, Vent Holes

  • Adjustable Hole Saw Cutter: This kit includes 1x adjustable hole saw with two replaceable pilot drill bits (1 x auger type self-feed pilot bit +1x HSS pilot bit), 2x high speed cutting blades,1x ABS dust shield, 1x adjustment hex wrench, 5x brad-point wood drill bits and 5x Masonry drill bits, 1x carpenter pencil, 1x 3m tape measure and 1x durable storage case..
  • Size Adjustable: Twin blade hole cutter for cutting 1-5/8" to 8" (40 - 200mm) holes to 8" (40 - 200mm) holes with depth up to 3/4"(19mm) from one side, 1-1/8"(30mm) from two sides..
  • Application: It can be used to cut plywood, sheetrock, veneer, cement board, slate, ceiling tiles, etc. A practical tool set for carpenters, home decorators, contractors, professionals and DIY home owners..
  • Easy To Carry: The hole saw cutter comes with a sturdy carry case for easy storage and organize. Easy and convenient to carry. Improve work efficiency..
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for....
Check Stock

BOSCH Bare-Tool CCS180B 18-Volt Lithium-Ion 6-1\\/2-Inch Lithium-Ion Circular Saw

  • PRECISION: The Bosch CCS180B Circular Saw Bare Tool has a 6-1 2-inch saw blade capacity and provides the ability to cut through 2-inch thick material at 90 degrees and 1-9 16-inch thick material at 50 degrees..
  • POWER: The cordless saw is balanced and compact with 3,900 no-load rpm and weighing only 6.6 lbs. for an outstanding power-to-weight ratio..
  • CONVENIENT: Featuring a left-blade design for a clear view of cut line when saw's main handle is held in right hand. The cordless saw also provides an adjustable, easy-to-read bevel and a depth-of-cut gauge for consistent locking and improved accuracy..
  • ACCURACY: The saw features the Bosch-exclusive anti-snag lower guard for easing the blade into the work piece and an electronic brake to quickly stop the blade for quick and easy use..
  • DURABLE: The Bosch CCS180B Circular Saw Bare Tool was built to withstand years of the toughest jobs with a heavy-duty aluminum foot and upper guard. It also includes Bosch’s Motor and Cell protection to prevent overload and overheating..
  • The 6 1/2-inch saw blade can completely cut through 2-times material even at full depth of cut.
  • Exclusive anti-snag lower guard for easing into the work piece.
Check Stock

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

  • This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
  • This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
  • The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..
Check Stock

JINGLING 50mm 2\ inch Diamond Drill Bit Hole Saw for Glass Tile Ceramic

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock

Koopi 1-Inch / 25mm BI-Metal Hole Saw with Arbor and Replacement Pilot Drill Bit, Hole Cutter for Easily Drilling Wood, Plastic, Thin Metal

  • This 1" Hole Saw Drill Bit is designed for wood / plastic cutting..
  • Arbor shank diamater- 3/8 in (fit for all 1/2"&3/8" drill).
  • Non-binding clean edge design make the hole saw blade cuts smooth and fast.More than that,the spring on the drill bit is nice because it automatically pushes the disc out of the saw immediately after completing the hole..
  • This 1 in hole saw made of M42 BI-Metal and High Speed steel, Durable and cuts clear.
  • Pakage Include: 1 x 1" hole saw (hole saw and arbor are integrated design).
Check Stock

4 Inch Hole Saw with Heavy Duty Arbor, 38mm Depth High Hole HSS Bi-Metal Cutter Saw 4 Inch Hole Saw Blade for Easily Drilling Soft Metal, Plywood, Plastic, Drywall, Wood, Fiberboard by AConnet (102mm)

  • 【High Performance Material】The 4 inch hole saw is made of M42 high speed steel and bi-metal, with higher hardness (≥64HRC), toughness and wear resistance, increased service life..
  • 【Hole Saw Dimensions】Cutting diameter: 4 inch (102mm).
  • Hole saw arbor shank: 7/16 inch (12mm), fits 1/2" drills..
  • 【Efficient Smooth Cutting】The hole saw blade is combine with sharp teeth, bi-metal band and non-binding clean edge.
  • Sharp duplex tooth for nice edge and sharp.
  • Therefor the hole saw blade cuts smoothly, cleanly and quickly..
  • 【Package Include】 Package include 1 pcs 102mm hole saw, 1 pcs 7/16" hole saw arbor, 3 pcs high-speed steel pilot drills and 1 pcs Allen wrench. Contact us if there any problem with the product. We attach great importance to customer's shopping satisfaction and are willing to solve any problems you have..
Check Stock

JINGLING 175mm 7' inch Diamond Hole Saw Coated Tile Drill Bits for Glass Stone

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

JINGLING 100mm 4\ inch Tile Diamond Hole Saw Drill Bits for Glass Stone Ceramic

  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
Check Stock

6 Inch Hole Saw for Making Cornhole Boards - Heavy Duty Steel - Corn Hole Drilling Cutter & Hex Shank Drill Bit Adapter for Cornhole Game

  • This Hole Saw Drill Bit is designed for wood / plastic cutting. Great for Making Cornhole Boards. Package included: 6” hole saw, mandrel and drill bit work with any 1/2" drills..
  • It is made of heat treated carbon steel alloy. Heavy Duty, Durable and Rust-proof. Built tough for repeat use and handy for working on cornhole boards and plastic..
  • 6” hole diameter - prefect size for Corn hole board Drilling and no matter what you project like cutting 6” diameter holes through wood and plaster.
  • 7/8" saw blade depth. Pins lock the saw well and prevent Too tight or falling off..
  • With the non-binding clean edge design, this hole saw cuts smooth and easy. The spring on the drill would automatically pushes the disc out of the saw immediately after completing the hole..
Check Stock

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

  • Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
  • Cuts ceramic tile, marble, slate and fiberglass.
  • Continuous rim of carbide grit ensures smooth cutting.
  • Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.
Check Stock

JINGLING 63mm 2-1/2\ inch Diamond Drill Bit Tile Hole Saw for Glass Ceramic Stone

  • Product Name: diamond hole saw, diamond drill bit for tile, hole saw ceramic tile.
  • The diamond coated hole saw suitable for use in drill hole on glass, marble, tile or granite.
  • Use with water as a lubricant, holes require No futher work as cutting is clean.
  • Start drill at 45 degree to surface and align to 90 degree as hole forms.
Check Stock