Best Adjustable Straight Shank Taper Reamer
7/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56017, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check StockLichamp Reamers Set for Metal Taper Reamer Drill Bit for Steel for 3/8 1/2 5/8 3/4 inches Hole M2 HSS Chucking Bridge Steel Reamers
- Unique Tapered Reamer - Construction grade reamer set are used to align existing holes prior to bolt or rivet installation. Increased taper for ease in hole entry, especially for drilling holes bigger in pitman arm and steering knuckles..
- M2 High Speed Steel - HSS M2 ensures sharp and fast execution in most hard steel material for clean results, while provides good wear resistance in mild steels and non-ferrous materials..
- Wide Applications - Works well in free cutting and carbon steels, as well as soft, non-ferrous materials such as aluminum, brass and copper..
- Five Grooves Fast Drilling - Reversed spiral push chips forward and are ideal for through-hole applications, reduces the friction, runs cooler, performs well in heat, corrosion and rust resistance..
- Safe Straight Shank - Round shank with 3 flats to prevent slipping in the drill chuck, safety flange/ stop collar to prevent the reamer running through the hole..
Check Stock15/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56069P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- Morse taper shank #3, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock29/32\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56068P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 1/2 " flute length, Partial Flute Length Carbide.
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock13/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56065P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 3/8 " flute length, Partial Flute Length Carbide.
- Morse taper shank #2, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 7/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56080P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 2" flute length, Partial Flute Length Carbide.
- Morse taper shank #4, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock1 5/16\ Expansion Reamer, Carbide Tipped, Tapered Shank, Partial Flute Carbide 56078P, USA Made
- When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
- 1 7/8 " flute length, Partial Flute Length Carbide.
- Morse taper shank #4, For Reaming Abrasive Material.
- This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check StockViking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer
- 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
- Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
- Reamers designed for enlarging previously formed or drilled holes.
- 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check StockHOUNDSBAY Bulldog Heavy-Duty Shoe Stretcher for Women | Loosens Tight Shoes with Strong Wood & Metal Construction Women’s Small / 3.5-5.5 US
- 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
- Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
- Reamers designed for enlarging previously formed or drilled holes.
- 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check StockQWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm
- ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
- ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
- ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
- ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check StockHigh Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm
- Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
- Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
- Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
- Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
- Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.
Check Stockuxcell Hand Reamer 5mm Alloy Tool Steel H8 6 Straight Flutes Hand Milling Cutter Tool 2Pcs
- The reamer range is 15/32 inch to 1-1/2 inch..
- Product includes 11Pcs high speed adjustable hand reamers H4-H14..
- The adjustable reamer is made of HSS(high speed steel) with good hardness and toughness..
- Adjustable reamer is straight flute with straight handle..
- The reamer is suitable for drilling machines and other machine..
Check StockPAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool
- Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
- Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
- Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
- Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
- Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock