Categories

Best Adjustable Welding Electrode Clamp

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

  • 【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
  • 【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
  • 【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
  • 【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
  • 【Work Great】Which are easy to remove and clean corrosi....
Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

  • ...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
  • cable set with terminal lugs and cable set with Dinse connectors..
  • Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
  • Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
  • Heavy duty 300-amp stick electrode holder with strong jaw spring.
  • both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
  • 1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer ....
Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

  • 【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
  • 【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
  • 【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
  • 【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
  • 【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..
Check Stock

GZ GUOZHI Stick Welder, 125A MMA/ARC Welding Machine with LCD Display, IGBT Inverter 110V Portable Welder Machine with Hot Start

  • 【Super Mini and Portable】: GUOZHI ARC-125 welding machine with unique appearance design, small and Exquisite, Initiated in the industry. Dimension: 9.78"*4.07"*6.53", Weight is only 5.68 lbs. It comes with adjustable shoulder strap, easy to carry..
  • 【Best Choice for Beginner】: Portable welding machine with built-in hot start function, quick arc starting. Easy work with new welders or users. It can be welded normally at minus 20 degree, advanced technology and reliable quality..
  • 【Powerful Functions】: 20A-125A adjustable current, 90V-140V wide-voltage design, unafraid of the voltage fluctuations. It’s ideal for E6011.E6013.E6014.E7018 and welding rods below 1/8 inch.It can weld 10 electrodes in a row without protection,with high duty cycle..
  • 【Safety Guarantee】: Welder machine with Over-heating protection, Over-current protection and over-loading protection,use more safety ,quality more assured..
  • 【Excellent Accessories】: All accessories are made of high-quality materials. Package included: ARC-125 Welding Machine, 10-feet 300A Electrode Holder, 10-f....
Check Stock

Weldpro 200 Amp Inverter Multi Process Welder with 3 Year Warranty Dual Voltage 220V/110V Mig/Tig/Arc Stick 3 in 1 welder/welding machine

  • Weldpro's flagship 200 amp MIG welder that goes beyond MIG and Flux Core welding! AND 3 YEAR WARRANTY!.
  • The model 200 is also capable of true lift TIG welding (without foot pedal) as well as stick welding and aluminum welding with the optional spool gun. The MIG 200 is an intuitive synergically designed MIG / Flux Core welding machine..
  • MIG,Stick or TIG weld all from a single compact, space-saving unit. Welding Amperage Ranges230V: MIG: 40-200A.
  • MIG welding wire diameter: .023 .030 .035, welding thickness: 19ga- 0.197 in.
  • TIG tungsten needle diameter: 0.063 0.094, welding thickness: 25ga- 1/4 in.
  • MMA electrode Dia: 0.063-0.157 acid electrode, alkaline electrode, welding thickness: 14ga-0.315in.
  • Dual digital display easy to read and set amperage and wire speed for repeatable welds every time. VRD high temp and overload protection with indication. User adjustable inductance settings..
Check Stock

GZ GUOZHI 130A Stick Welder, Super Mini and Portable Welding Machine, Hot Start 110V ARC MMA Welder Machine, Digital Display IGBT Inverter Welder, Welded Normally at Minus 20 Degree

  • 【Super Mini and Portable】: GUOZHI ARC-130 welding machine with unique appearance design, small and Exquisite, Initiated in the industry. Dimension: 7.9"*3.2"*4.7", Weight is only 4 lbs. Portable carry with adjustable shoulder strap, easy to carry..
  • 【Powerful Functions】: Portable welding machine with built-in hot start function, quick arc starting. Easy work with new welders or users. It can be welded normally at minus 20 degree, advanced technology and reliable quality..
  • 【Safety Guarantee】: Welder machine with Over-heating protection, Over-current protection and over-loading protection,use more safety ,quality more assured..
  • 【Best Choice for Beginner】: This welder ideal for E6011.E6013.E6014.E7018 and welding rods below 1/8 inch.It can weld 10 electrodes in a row without protection,with high duty cycle..
  • 【Adjustable Voltage & High-Quality Accessories】: 20A-120A adjustable current, 90V-140V wide-voltage design, unafraid of the voltage fluctuations. Accessories included: 10-feet 500A Electrode Holder Assembly, 10-feet 500A Work Clamp Assembly, H....
Check Stock

NewPosition MIG/MAG/MMA 3-in-1 Welder, 160A Stick ARC Welding Machine, Flux Core Welder, Gas/Gasless IGBT Inverter,110V

  • ...e better welding performance to the workpiece..
  • 【MULTIFUNCTIONAL】This powerful welder has three functions of MIG welding, MAG welding and MMA welding. You can use it with CO2 gas, mixed gas or without gas. It’s suitable for welding sheet of low-carbon steel, alloyed steel and stainless steel..
  • 【WELDING WIRE & ELECTRODE】This machine uses 2Lbs solid wire(0.030’’), 2Lbs flux cored wire(0.030’’), or basic electrodes with a diameter of 3/32’’-1/8’’..
  • 【PORTABLE DESIGN】This welder features an easy carrying handle, compact design, easy for translation and storage. It’s suitable for moving jobs and working at height. It’s quite small, easily carried to any Do-It-Yourself, Maintenance, Repair, Metal Fabrication and Hobbyist project..
  • 【COMPLETE PACKAGE】This model is supplied with full accessories with MIG torch, electrode holder with cable, earth clamp with cable, brush and mask. Ready to use! Note: The diameter of the contact tip of this welding torch is 0.8mm. If you use 1.0mm welding wire, you need to change the contact tip. (If you have any questions in use, please feel free to contact us. We will reply you within 24 hours.).
Check Stock

A Dark Heart (Elders and Welders Chronicles Book 2)

  • ️【★TIG&ARC Strong Point】High Frequency Start TIG,Non-Contact Arc Initiation That Reduces Tungsten And Material Consumption.Rated Input Frequency 50/60Hz, Duty Cycle 85%，Improves The Performance Of The Welding Machine..
  • ️【★Feature】TIG/ARC 2-in-1,Tig& ARC Welder With Tig Torch, Earth Clamp, Electrode Holder,Welding Tong.
  • ️【★Portable And Powerful】TIG Welding Thickness 0.3-4.8mm,Stainless Steel, Alloy Steel, Mild Steel, Copper, Cast Iron And Chrome.ARC Welding Thickness 15-42mm.
  • ️【★Energy Saving】Portable Handle Makes It Easier To Operate, The Lightweight Makes It More Convenient To Carry.Suitable For Stainless Steel, Alloy Steel, Carbon Steel, Copper, Copper Alloy And Other Non-ferrous Metal Welding.
  • ️Automatic Compensation For Voltage Fluctuation, Over-voltage Protection, Under Voltage Protection, Over Current Protection, Over Load Protection.
Check Stock

ARC-160 Amp Stick Arc DC Inverter Welder, 110V & 230V Digital Display LCD Welding

  • Advanced control module IGBT, improves the performance of the welding machine..
  • Start arc easily, stable welding Arc, deep weld pool and beautiful welding shape..
  • This is optimized to deliver a flawless weld, making spatter and post-weld clean-up almost non-existent..
  • Over voltage protection, under voltage protection, over current protection, overload protection, fan automatic temperature control..
  • 115V/ 230V/ 60Hz input current at rated output 20 Amp, 60% duty cycle at 160 amps..
  • 10 feet 300A electrode holder & 10 feet 500A work Clamp cable..
  • Etl listed, All machines tested in the USA..
Check Stock

ARC Stick Welder 200Amp 110V Welding Machine, Mini Welder Machine Beginners Welder With Display LCD Use Welding Rod Tools

  • ...t arc easily, stable welding arc,optimized to deliver a flawless weld, making spatter and post-weld cleanup almost non-existent.
  • ☢【Light Duty Welding Machine】Mini welder machine But Big Power. This 110v arc welder features an easy carrying handle, portable carry with adjustable shoulder strap, compact light-weight design, it is convenient for welding indoors and outdoors. So you can work smarter not harder by bringing the welder to the work, the welder machine can be used anywhere you need.
  • ☢【Easy to Use】1 x 110V ARC Welding Machine, 1 x Stick Welding Rod Electrode Holder, 1 x Arc Welding Ground Clamp, 1 x Welding Mask, 1 x Brush, 1 x Shoulder Strap, 1 x Welder Operation Manual.The arc welder 110v is easy to use, and only one button needs to be used to start any welding work. This mini welder machine is great for hobbyists and repairing items around the house. It can be used by a novice or welder, whether it is a male welder or a female welder.
  • ☢【Multi-purpose Arc Welder Kit】The stick welder has amazing hot-start, is ideal for the rods 2.5mm. Powerful arc welder 200 amp capable of welding stainless st....
Check Stock

250Amp MMA Welder, TEWLEN ARC Welding Machine Kit, Portable 110V IGBT Digital Display LCD Hot Start Welder Electric Welder Machine with Electrode Holder,Earth Clamp,Mask,Brush,Welding Rods,Gloves

  • ...s to make the work easier. Our this mini MMA welder si the good choice for beginners, welding hobbyists, DIY use and professionals ect...
  • 【Portable Design】110v ARC welding machine design with perfect appearance and high-quality internal structure, small body, light weight, high efficiency and energy saving, with adjustable portable shoulder strap, easy to carry and use whether working outdoors or indoors..
  • 【Complete Accessories】250A ARC Welding Machine Kit includes 1 x 250Amp Inverter Welder.
  • 1x User Manual. If you encounter any problems, please contact us immediately, 24 hours service..
Check Stock

Amico ARC-160D, 160 Amp Stick ARC IGBT Inverter DC Welder 115/230 Dual Voltage Welding Soldering

  • ...machine has an excellent Lift-TIG arc welding function.
  • 5-160A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a reliable work tool for professionals o....
Check Stock

Mig Welder Machine Inverter Gas Gasless RBM1500 Mig Stick Tig 4 in 1 Flux Core 220V Supports 2LB Wire Automatic Feed for Beginner

  • [Multiprocess MIG Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel..
  • [Stick Welding] switch to “MMA” on the panel and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well.
  • [Generator Supported] this welder works well with a generator,but we suggest a 5000W above generator【30A breaker suggested for 220V】.
  • [Warranty] buy this welder with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!.
  • Packing List : 1X dual Mig150,1X earth clamp,1X electrode holder,1X welding torch,1X 2lbs flux cored wire,1X welding hose.
Check Stock