Categories

Best Aerospace Industry Cutting Laser

Precision Twist R18CO Cobalt Steel Jobber Drill Bit, Bronze Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 63 (Pack of 12)

  • NAS 907 type B standards, used in the aerospace industry.
  • Gold oxide, retains cutting fluid and prevent chip to tool welding.
  • 135-degree split-point angles are self-centering, reduce walking, good for hard material, and reduce pressure on cutting edges.
  • High-speed steel (HSS) containing cobalt, for use on abrasive materials and high cutting temperatures.
  • Jobber-length drill bits and the most common length drill bit, suitable for a wide range of applications.
Check Stock

Swanson SVE720 72-Inch Savage Straight Edge, Non-marring, Anodised and Laser-Etched Scale

  • No Slip Grip backing provides protection against scratching or marring surfaces and a a more stable and safer cutting guide.
  • ThumbSaver raised edge design protects your hand while working.
  • Anodized aerospace aluminum frame for durability.
  • Precision laser etching on high-visibility orange finish.
Check Stock

Swanson SVE240 24-Inch Savage Straight Edge Non-marring Anodised and Laser-Etched Scale

  • No Slip Grip backing provides protection against scratching or marring surfaces and a a more stable and safer cutting guide.
  • ThumbSaver raised edge design protects your hand while working.
  • Anodized aerospace aluminum frame for durability.
  • Precision laser etching on high-visibility orange finish.
Check Stock

Makita 2 Pack - 4.5” Segmented Rim Diamond Blades For 4.5”+ Grinders & Circular Saws - Long-Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ...mented Diamond Blades For Long-Lasting & Reliable 1.25” Depth Concrete, Cinder Block & Brick CUTTING | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADE WARPAGE, Premature Wear and slow down periods with lower priced blades by relying on Makita’s advanced air flow cooling technology, allowing fo....
Check Stock

Pinty Green Laser Sight Hunting Rifle Dot Scope Adjustable with Mounts

  • DURABILITY, made of aerospace grade aluminum, our laser sight features 532 nm wavelength, works well in any weather conditions.
  • POWERFUL GREEN LASER, highly visible green laser in any environments with improved accuracy, reaches up to 100 to 300 ft. during the day and up to....
  • CONVENIENCE & COMPATIBILITY, comes with a remote control to easily switch laser on and off.
  • complementary 1" barrel clamp mount and figure 8 mount to....
  • UPGRADED OPTICS contribute to a super sharp and bright green laser sight, providing unparalleled clarity for the naked eye.
  • PERFECT for novice shooters as well as professionals, our laser scope is a must-have for anyone with a shotgun and can be used regardless of plinking....
Check Stock

Slot Cutter 2021 Square Rectangle Milling Cutter Carving One Step in Place Stainless Steel Square Slot Cutter Stainless Quickly for Plastic Metal or Low-Voltage Electrical Boxes mounting Compatible

  • ...of a single cut is about 7-8MM, and the repeated cutting can reach 30-35MM..
  • Precise cutting: Precisely create a single gang size of 2-3/8” x 3-3/4” or double gang size of 3-3/4” x 4” in the drywall, perfect for plastic, metal or low-voltage electrical boxes mounting..
  • WIDE COMPATIBILITY: Compatible with most industry standard oscillating multi-tools in the market, such as Dewalt, Dremel, Makita, Porter Cable, Ridgid, Rockwell, Fein Multimaster, Ryobi, Milwaukee, Chicago, Genesis, Craftsman etc. Suitable for plasterboard, dry wall etc..
  • Various uses: Make single gang or double gang rectangular holes in drywall for wall boxes such as high and low voltage tech, electrician, telephone, alarm/ security, CCTV/ IP camera, antenna, automation, home-theater including CEDIA members, HAVC, drywall contractor/ installer, etc..
Check Stock

Makita 2 Piece - 4.5” Turbo & Segmented Diamond Blade Set For 4.5”+ Grinders & Circular Saws - Ultra-Fast & Lasting Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ...remium Segmented + Turbo Rim Diamond Blades For FAST & RELIABLE Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ 1 SEGMENTED Steel disc is ideal for safe and continuous use with minimal warpage risk due to its advanced air flow cooling technology | RELIABLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds, and Makita’s proprietary industry leading bond matrix that allows for optimal diamond exposure-to-bond wear ratio.
  • ✅ 1 TURBO Steel disc is ideal for quicker and faster cuts in Concrete & Masonry | AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita....
Check Stock

Makita 2 Pack - 4.5” Turbo Diamond Blades For Grinders & Circular Saws - Ultra-Fast Cutting For Concrete, Masonry & Brick - 5/8”, 20mm & 7/8” Arbors

  • ✅ 2 Makita 4-1/2” Premium Diamond Turbo Blades For FAST Concrete, Cinder Block & Brick Cutting | 4 1/2" x 0.79 x 7/8-Inch Arbor, Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
  • ✅ CUT 2-3X MORE concrete than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup, allowing you to cut longer, consistently precise with moderate power demands with the lowest heat buildup in the industry.
  • ✅ QUICKLY & EFFORTLESSLY CUT through All Concrete, including general cured concrete, reinforced concrete, block & brick cutting in Wet or Dry conditions over an extra-long life span due to Makita’s Premium High Quality Industrial Diamonds with Makita’s proprietary bond that allows for optimal diamond exposure-to-bond wear ratio for accurate cutting PERFORMANCE, HIGHER TEMPERATURE RESISTANCE & STABILITY, cutting longer and faster than other blades in its class.
  • ✅ AVOID BLADEWEAR & Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVI....
Check Stock

ZBAITU C80 80W Laser Module Kit, 10W Optical Diode Laser Module for Engraver Cutter, 10W Laser Head for DIY Metal Wood Leather Acrylic Glass, Compatible Most Laser Engraving Cutting Machine, 12V

  • 【Wide Compatibility】The attached adapter cable and dovetail slider can help the ZBAITU C80-EAIR laser module to be compatible with most laser engraving and cutting machines on the market, also compatible with other machines that use 12V input voltage, you don't need to repurchase a laser engraving machine to improve engraving and cutting efficiency, high cost performance.
  • 【Air Assist】ZBAITU C80-EAIR Air assist laser module can blow away scrap and smog during engraving and cutting, boost effect, engraving and cutting more refined, reduces yellow smoky marks on the edges of the cutting line, the most important is to reduce the pollution to the lens to ensure the service life of the laser module.
  • 【High Power】The ZBAITU C80 EAIR laser engraving module has a 10W laser output power, it can quickly engrave metal, wood, leather, glass, and acrylic etc. The C80 EAIR laser cutting machine module is also excellent on cutting function, it can cutting 5mm plywood in one pass.
  • 【Ultra Accuracy】The newest FAC technology compresses the laser point of the ZBAITU C80 EAIR laser module to 0.08mm, the lines for engraving....
Check Stock

Sniper FL3000 Tactical Green/IR Laser Sight Combo Fit Night Vision

  • IR Laser Sight Fit Night Vision. Infrared LED/Laser: 850 nm. Please note that the infrared laser beam is only visible when using NIGHT VISION EQUIPMENT..
  • Durable aerospace aluminum, coupled with a water tight design..
  • Easy to control – Comes with wire cable remote control pressure pad switch. Please note that top rail CANNOT be removed..
Check Stock

Walther PPKS .380 IWB Molded Leather Inside Waist Concealed Carry Holster TAN RH

  • [Unique Design] Emit a green laser clean beam(Class IIIA laser, Output less than 5mW) with wavelength of 532 nm, providing a precise reference for....
  • [Premium Material]The laser gun is made of aerospace grade aluminum with a heavy anodized accomplished which can withstand huge crash. Its totally....
  • [Picatinny Rail Mount] It has a 1 inch offset P13 picatinny rail mount which not only fits GL6 laser but also the Feychi FL series flashlights..
  • [Lightweight & Compact] Ultra light & handy with dimensions 4.7x1.6x1.6 inches & weighs 4.5oz. Compact design, great for concealed carry..
  • [What You Get] The laser sight comes with 1 P13 picatinny rail mount, pressure switch and user manual..
Check Stock

HOLOSUN HS507K-X2 Classic Multi Reticle, Red Dot Sight (Black)

  • Higher Compatibility:Built with a button switch and momentary wire pressure switch.The rail mount offset design allows for more flexible hand or accessory placement without obstruction of beam..
  • Powerful Green Laser:Built with CLASS IIIa laser (Max Output≤5mw) which feaures 532nm wavelength. Highly visible green laser beam reaches up to 100 to 300 ft. during the day and up to 1000 ft. at night..
  • Highly Durable:EZshoot green laser sight is made of aerospace grade aluminum that is both lightweight and will last a lifetime..
  • Wide Applications:Upgraded optics contribute to a super clear and bright green laser sight, providing unparalleled clarity for the naked eye.Ezshoot green laser sight fits for novice shooters as well as professionals,which can give you a more accurate target..
  • Adjustable Laser Sight:The green dot laser sight is adjustable by external adjustment knob,easy and safe.If you have any problem after you receive our product, please fell free to contact us..
Check Stock

Makita 2 Pack - 4” Continuous Diamond Blades For 4”+ Grinders & Circular Saws - Precise Cutting For Tile, Porcelain & Stone - 5/8”, 20mm & 7/8” Arbors

  • ...iamond Blades For 1” Depth Cutting into TILE, PORCELAIN & STONE Applications | 4" x .79 x 5/8-Inch Arbor, Optimized for Makita 4” & 4.5" Angle Grinders & 4"+ Circular Saws and compatible with All 4” & 4.5" Angle Grinders & Saws.
  • ✅ CUT 3-4X MORE Tile, PORCELAIN, Stone than lower quality blades due to Makita's Industry leading Diamonds and Premium Bond that provide the optimal cut-to-wear ratio, optimized for the best Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry | For Best Results, consider using Water to flush out debris and Extend Blade Life.
  • ✅ PRECISELY & EASILY CUT Marble, Granite, Stone, Glass, Porcelain & Ceramic Tile, including Flagstone & PermaBase with Minimal Material Crack OR Shatter Risk | TURBO & SEGMENTED Steel blades are ideal for FASTER and LONG-LASTING Cuts in General Concrete & Non-Tile/Stone Masonry.
  • ✅ AVOID BLADEWEAR Slow Downs with lower priced blades by relying on Makita’s proprietary matrix bond, allowing for fast, accurate and continuous cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other blades that may warp or prematurely wear.
  • ✅ DESIGNED for Hard and Continuous use by professionals in construction, concrete fabrication,....
Check Stock