ASC Car Stereo Dash Kit, Wire Harness, Antenna Adapter, and Radio Tool for Installing a Single Din Radio for select VW Volkswagen Beetle Vehicles - Compatible Vehicles Listed Below
- -Combo Kit for Aftermarket Radio Installation in Factory Radio Location -Radio Kit, Radio Wire Harness, Antenna Adapter, and Radio Removal Tools -Use to add an aftermarket radio to the factory vehicle wiring. -Standard wire coloring usually will connect color for color to aftermarket radio's wire harness..
- -Black color radio kit -Designed specifically for the installation of Single-DIN radios -High-grade ABS plastic – contoured textured and painted to compliment factory dash -Special antenna adapter to turn on the factory amplified antenna for strong radio reception -Will not retain some features that go through the radio like steering audio controls, etc.- other adapters are needed for retention..
- Compatible vehicles: 1998 1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 VW Volkswagen Beetle.
Check StockMetra 40-GM10 GM Antenna Adapter
- Copper, Polypropylene And Steel Design For Durability.
- Gm Factory Antenna With Mini "Barbless" Or "Barbed" Plug To Aftermarket Radio.
- Gm Factory Antenna With Mini Barbed Or Barbless Plug For Aftermarket Radio.
- GM factory antenna with mini barbedor barbless plug for aftermarket radio.
Check StockMETRA Ltd 40-GM20 Gm Radio Antenna with Mini Adapter
- Factory Radio with Mini "Barbed" Connector to Aftermarket Antenna Adapter.
- For 1988-2006 GM Vehicles Equipped with Mini Barbed Plug-In.
- GM factory radio with mini barbed connector to aftermarket antenna..
Check StockMetra 99-7862 Lower Dash Single DIN Installation Kit for 2003-2007 Honda Accord with Wire Harness
- Mounts aftermarket radio in console pocket location.
- ISO mount radio compatible using snap-in ISO radio mounts and trim ring.
- Comes complete with harness that will provide all the connections to install an aftermarket unit using factory speaker power and ground wires.
- Comes complete with built-in under radio pocket.
Check StockRetain OEM Factory Backup Reverse Camera to New Aftermarket Car Stereo Display/Navigation Radio Wire Harness w/ 6 Volt Converter for Some Toyota and Scion - Important- Compatible Vehicles Listed Below
- Factory Camera Retention Harness with 6 Volt Power Adapter Combo. Use this harness to retain the factory reverse camera when adding an aftermarket....
- Retains the factory back-up camera to an aftermarket radio. Use with aftermarket radio that has a backup camera input feature only- usually radio with....
- Compatibility Notes: New aftermarket radio must have backup camera input capability. Might work with more vehicles- if the connector looks like the....
- Works with the following vehicles: Scion: FR-S 2016, iM 2016, tC 2016.
- Toyota: 4-Runner 2014-2019, 86 (early build, before 12-17) 2018, 86 2017,....
- RAV4 (after build date Nov. 2013) 2014, Sequoia 2014-2019, Sienna 2015-2017, Tacoma 2014-2019, Tundra 2014-2019, Venza 2015, Yaris 2018-2019.
Check Stock
RDBS Car Stereo Wire Harness and Antenna Adapter Combo kit to Connect an Aftermarket Radio Fit for 2013-up Dodge Jeep Ram Vehicles - No Factory Premium Amp
- Compatible with: Dodge: 2013-2016 Dart( need to connect black wire to yellow and the yellow to black,NOT FIT 2011 Dodge Grand Caravan) Jeep: 2014-2018 Cherokee, 2015-2019 Renegade.
- Compatible with: Ram( the following models all need to connect BLACK wire to YELLOW and the YELLOW to BLACK): 2013-2019 Ram Truck, 2014-2019 Promaster (not compatible with 2014-2016 radio, delete or am/fm only models) 2015-2019 Promaster City）.
- VERY IMPORTANT----: Not compatible with factory amplified stereo systems, Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, JBL/Synthesis, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). Will not retain some features that go through the radio like factory rear dvd, aux input, backup camera, steering audio controls, etc..
- Connection an aftermarket radio to the factory vehicle wiring Standard color coded wires for an easier installation to aftermarket radios wire harness. Antenna adapter to connect aftermarket radio plug to the vehicles antenna connection.
- Pre-Stripped To Make Installation Quick And Easy.
Check Stock
ASC Audio Car Stereo Radio Wire Harness Plug and Antenna Adapter for some Buick Chevrolet GMC Pontiac Saturn Vehicles - Compatible Vehicles Listed Below
- Wire harness and antenna adapter for installing an aftermarket radio. For easier install with no running ignition wire separate and retain chime, standard Bose/amp, etc see the following link- https://www.amazon.com/dp/B07DSD123C.
- ---VERY IMPORTANT---- PLEASE READ BEFORE PURCHASE----: Wire harness only works with standard non-premium amp factory systems- Not compatible with amp systems like Bose, Infinity, etc.- Red ignition wire of the new radio has to be run separately from the vehicle radio harness (factory radio plug has no ignition power wire). As a result, this isn't considered an easy installation..
- Will not retain some features like warning chimes, steering audio controls, Onstar, etc- extra adapters required..
- Compatible with: Buick: 2008 2009 2010 2011 2012 Enclave, 2006-2011 Lucerne.
- Chevrolet: 2007-2011 Avalanche, 2007-2009 Equinox, 2008-2012 Express, 2006-2013 Impala, 2006-2007 Monte Carlo, 2008-2011 Silverado, 2007-2011 Suburban, 2007-2011 Tahoe, 2009-2012 Traverse.
- GMC: 2007-2012 Acadia, 2008-2012 Savana, 2008-2011 Sierra, 2007-2011 Yukon, 2007-2009 Pontiac Torrent.
- Saturn: 2007-2009 Outlook, 2008-2009 Vue.
- When replacing your factory radio with an aftermarket car stereo, a wire harness is a must for a quick install....
Check StockMetra 40-EU10 Antenna to Radio Adapter Cable for Select 2002-Up BMW/Volkswagen Vehicles,Black
- For select 2002-Up BMW/Volkswagen vehicles. For dual Connector applications use the 40-eu56.
- Factory antenna with mini-style plug to aftermarket radio.
- Connect your factory antenna cable to any aftermarket receiver.
Check StockAndroid 10 Autoradio Car Navigation Stereo Multimedia Player GPS Radio 2.5D IPS Touch Screen for Honda Civic 2004-2011 Quad Core 1GB Ram 16GB ROM
- Use this harness to retain the factory reverse camera when adding an aftermarket radio Product Details: Retains the factory back-up camera to an....
- Compatibility Notes: Only works with vehicles that came with no Factory Navigation. New aftermarket radio must have backup camera input capability..
- Works with the following vehicles: Only works with vehicles that didn't come with Factory Navigation- (NOTE 1) -Without 7-inch touchscreen radio (NOTE....
- (NOTE 1) – Without 7-inch touchscreen radio (NOTE 2) – Without UVO radio.
Check StockCarxtc Stereo Antenna Harness Adapter for Installing a New Radio. Fits Ford, F-150, 2009, 2010, 2011, 2012
- Antenna adapter for installing a new Radio into a Fits F150 2009, 2010, 2011, 2012.
- CarXtc antenna adapter plugs directly into the factory radio pulled from a F-150 ..
- Use with New Aftermarket Radio Installs – Keeps FM / AM Factory Antenna Useable..
- Antenna adapter is needed Fits F-150 09, 10, 11, 12.
- If installing an FM modulator you will need this and the standard aftermarket antenna adapter.
Check StockAxxess GMOS-LAN-034 GM Factory Integration Interface OnStar and Chime Retention Module for 2006-Up Select GM Vehicles
- GM Factory Integration Interface OnStar & Chime Retention Module.
- Designed to retain Onstar and warning chimes that are normally lost when OEM radio is removed.
- Provides a 12 volt accessory output for aftermarket radio operation.
- Reverse output to make installing an aftermarket navigation radio simple.
Check StockSony CDX-G1200U 55Wx4ch max CD Receiver with USB and Aux Inputs
- 70-1761 radio wire harness compatible with Toyota: 2017-2019 C-HR, 1993-2019 Corolla, 2001-2019 Prius1999-2018 Tundra, 1992-2019 4 runner, 2002-2018....
- Car stereo wiring harness connector replacement for Non-JBL System Subaru: 2010-2019 Subaru Legacy, 2013-2019 Subaru Outback, 2012-2019 Subaru WRX,....
- Plug and play.The toyota radio harness totally directly install. Help for install an aftermarket radio use existing factory harness. No cut factory....
- The subaru toyota ISO wire is harness make of professional copper wire, Reliable quality, safe and secure..
- The ISO Wiring Fit Most of aftermarket radio pioneer, sony, Android, Peterbilt kenworth and boss head unit with iso connector. Fit Non-JBL System....
Check StockPAC CAM-TY12 Reverse Camera Harness for Select 2014.5 to 2017 Toyota Vehicles
- Retains OE back-up camera for radio replacement applications.
- Allows addition of an aftermarket backup camera (sold separately) to factory systems.
- Prewired 6 volt output wire for OE camera retention when used with PAC RP4.2-TY11 radio replacement interface.
- Integrated 6-volt output wire can be used for powering an aftermarket back-up camera (6-volt models only) when adding camera feature to OE radio.
- For Toyota 2016 Scion FRS, IM, and TC vehicles, all trim levels.
Check Stock
