Categories

Best Aggregate For Concrete

QEP 6 in. x 2 in. Comfort Grip Flat Margin Flooring Trowel with Bucket Hook, Silver (42112)

  • Sandblasting finish for antirust, strong and durable. Carbon steel anti-rust performance is slightly lower than stainless steel, PLEASE keep the trowel dry after use.
  • [Flat Blades & Square End Type] Flat blade makes applications easier with more consistent finish. Beveled working blade edges prevent aggregate popping, can be used for application, smoothing, polishing and shining.
  • [Ergonomics Handle] No-turn handle design, ergonomic, camel-back wood handle makes them comfortable to use for less hand fatigue. Strong aluminum mounting securely welding with blades for long lifespan.
  • [Size Include] 3 Pieces concrete finishing trowels set includes 14’’ x 4’’, 12’’ x 4’’ & 8’’ x 3’’ different sizes, meet your different using requirement, will make your lives on the installation job easier, more efficient and more profitable.
  • [Professional Grade] The Goldblatt Concrete Finishing Trowels are an excellent choice for concrete hand work. Classically styled with a traditional camel-back wood handle, this trowel has been the industry standard for decades, will last for years to come.
Check Stock

SUPERCOAT Stone Gray Epoxy Floor Coating

  • Breathable two-part waterborne epoxy coating, Decorative flakes, Anti-slip aggregate, Cleaner/Degreaser included.
  • Professional grade floor covering, Easy to install, No acid etching or mechanical prep necessary in most cases, Clean with degreaser included, mix and apply with roller, Scatter flakes in wet epoxy.
  • Epoxy coating breathes allowing moisture vapors to pass through eliminating blistering and peeling, Resistant to automotive fluids, hot tire lift, Good adhesion to concrete and wood.
Check Stock

Zep HDSWEEP50 Floor Sweeping Compound, 50 lb

  • BEAUTIFUL WET LOOK SEALER Works on exposed aggregate, stamped, colored or decorative surfaces.
  • WILL NOT SIGNIFICANTLY DARKEN MOST SURFACEs when it dries. Does not look like you sprayed water on it. Resists chemicals and oil, Durable, Clear & Non-Yellowing..
  • PLEASE READ COMPLETE PRODUCT DESCRIPTION: Not for polished GRANITE OR MARBLE.
  • SPRAY, BRUSH OR ROLL on concrete, pavers, slate, driveways, garage floors, patios, masonry, brick warehouse floors.
  • MADE IN THE USA. Professional Results VERY low odor dries in hours..
Check Stock

Delta Diamond Cougar HS 14 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the d....
Check Stock

Delta Diamond Cougar HS 12 Inch Segmented Diamond Saw Blade Premium General Purpose Cutting of Concrete Masonry Pavers Stone .125 X 1 -20mm Arbor 12

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 12" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 6,300 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between t....
Check Stock

Delta Diamond Cougar HS 10 Inch Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .095 X DM-7/8\-5/8\ Arbor (10\)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 10" diameter X .095 thick with a standard DM-7/8"-5/8" Arbor. Fits most 10" concrete saws and masonry saws. Make sure to check your saws arbor to ensure correct fitment. Max. 6,115 rpm..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond between the diamo....
Check Stock

Starrett KD0300-N 3-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Starrett KD0400-N 4-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Starrett KD0600-N 6-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

LTM CONCRETE Dually Rebar Chairs (12 Pack) – 7 Heights in 1 Chair - Quick, Easy & Versatile Support – Vertical & Horizontal Applications – Made in USA

  • EXTREME VERSATILITY: The patented Dually is the only rebar spacer of its kind – one chair holding bars at many different heights! Clips will firmly hold #3-6 bars at 1”, 1 ½”, 2”, 2 ¼”, 2 ½”, 3”. Turned on its side, Dually will support any resting mesh or bar at 2 inches (up to #12)..
  • WIDE BASE: Works on grade, Dually features a wide base that prevents sinking and tipping on soft surfaces. It also includes plenty of flow-through spacing for aggregate and concrete..
  • HEAVY DUTY: This chair is made with a special blend of materials that support heavy loads and strengthen your pour. Our chairs will never rust, corrode or degrade inside the concrete..
  • EASY TO USE: Set an entire rebar grid in just minutes and eliminate the need for wire-tying. Dually is already low-priced, but you’ll save even more in labor costs..
  • MADE IN USA: The entire LTM Concrete product line is made in the USA, including 100% of our raw materials. Buy LTM and keep America working..
Check Stock

Zep All-Purpose Cleaner With Vinegar - 1 Gallon (Case of 4) R48410 - Gentle for Everyday Use

  • NOTE: THIS PRODUCT REQUIRES SIGNATURE UPON DELIVERY.
  • Construction Grade Pressure Wash removes tough oil stains, dirt & grime.
  • Best for use on: Concrete, Brick, Asphalt & Aggregate Surfaces.
  • Cleans walkways, patios, driveways & parking lots.
  • Not For Use On: Wood, painted, sealed or stained surfaces that will not be refinished.
Check Stock

Starrett KD0414-N 4.1/4-Inch Diamond Grit Holesaw

  • Effective cutting of hardened steels, fired ceramics, aggregate containing concrete, non-metallics and other difficult to cut materials.
  • Uniform synthetic diamond grit bonded over a durable steel platform.
  • Always use a coolant and start at a low speed, increase speed as ease of cutting is noticed while avoiding heat build-up on the cutting surface.
  • Recommended cutting speed is from 150 to 300-RPM.
Check Stock

Delta Diamond Cougar HS 14 Inch 3-Pack Segmented Diamond Saw Blade, Premium, General Purpose Cutting of Concrete, Masonry, Pavers, Stone, .125 X 1\-20mm Arbor (14\ 3pcs)

  • GENERAL PURPOSE - Cougar HS diamond saw blades are for general purpose cutting of soft to medium aggregate cured concrete, masonry, concrete or clay pavers, various types of stone and all similar materials. Not recommended for reinforced concrete with rebar, green concrete, or asphalt applications. View our other blades by Delta Diamond like the Cougar HD, Cougar S or the Kick-Asphalt Diamond Blade instead..
  • 12MM SEGMENTS - Premium grade 12MM tall diamond segments are designed for long cutting life with fast, smooth cutting in a wide range of materials..
  • WET OR DRY CUTTING - The center core is made from a tensioned, heat-treated hi-speed steel and is guaranteed to withstand the demands of dry cutting..
  • SPECIFICATIONS - 3 Pack of 14" diameter X .125 (1/8") thick and has a 1" arbor hole with 3/8" drive pin hole and 20mm bushing. Max 5,460 rpm. For use with hand-held power saws, 5-20 hp concrete saws, or masonry saws..
  • LIFETIME WARRANTY & FREE RETURN SHIPPING - All Delta Diamond Products, Inc Diamond Blades, Coring Bits, Hole Saws and Grinding Wheels include a lifetime warranty against warping, cracking, and material defects. If any diamond tool (being used under its intended use with at least 50% wear left) fails to cut or work properly, or if the bond bet....
Check Stock