Categories

Best Agricultural Implements

MaxAuto Farm Tractor Tire 6.00-12 Replace Kubota 7100 Series H167,2Pcs

  • Major Applications: Garden tractors,Tillers,Trenchers,Agricultural tractors,Other types of farm implements.
  • Tire Size:6.00-12/ Rim Diameter(in):12/ Section Width(mm):147/ Rim Width(in):5/ Tire Load Range:C/6PR/ Load Index(lbs):600/ Speed Index:A4/ Tread Depth(mm):14.5/ Max PSI:28/ TT:Tube Tire.
  • Wheel Diameter: 11"( A 6.00-12 is NOT the same tire as a 6-12. The 6.00-12 is over 2" taller and those two sizes DO NOT interchange on a compact 4wd tractor.).
  • Used primarily on compact utility tractors, the tire features an overlapping center tread lug that performs in both wet and dry conditions..
  • Prior to purchase, please check the size of the original tire on your vehicle to ensure the size of the tire to be purchased is correct..
Check Stock

3/4\ SAE Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers with Dust Caps,The Universal Quick Disconnect Coupler Bobcat Case/New Holland, Kubota

  • The flat face hydraulic quick connect couplers with 3/4" SAE thread+ 1/2 body, impoved design high flow performance and maximum service life.
  • The universal quick disconnect coupler connect interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota.
  • Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
  • Non-spill flush face valves minimize fluid losses.
  • Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.
Check Stock

Sinoblu 4pcs Shaft Collar Aluminum Stop Collar, 13mm Bore Size, 30mm OD, with M4 Set Screw, 10mm Thickness (Pack of 4)

  • Used for shaft fixing and positioning, Linear motion stopper and fixing the drill bit. Suitable for gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby craft industry and many more..
  • Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required.
  • High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong..
  • The shaft can be clamped-on tightly by set screw, the shaft will not be damaged.
Check Stock

MaxAuto 2Pcs 4.80/4.00-8 Tires 4.80x4.00-8 8 Lawn Garden Tires 4.80x4.00x8 4.80-4.00-8 Turf Lawnmower Tractor Golf Cart Tubeless Tire

  • Major Applications: Garden tractors,Tillers,Trenchers,Agricultural tractors,Other types of farm implements.
  • Tire Size:4.80-8/ Rim Diameter(in):8/ Section Width(mm):110/ Rim Width(in):3/ Tire Load Range:B/4PR / Load Index(lbs):675/ Speed Index:A4/ Tread....
  • The tires are most often found on garden tractors, tillers and trenchers..
  • This powerful line is the right choice whenever the application requires substantial traction..
  • Prior to purchase, please check the size of the original tire on your vehicle to ensure the size of the tire to be purchased is correct..
Check Stock

3/8\ Flat Face Hydraulic Quick Connect Couplers/Couplings with Dust Caps,The Universal Hydraulic Quick Coupler Interchange with 3/8\ Body ISO 16028 Standard, 3/8\ Body+ 3/8\ NPT Thread

  • The flat faced hydraulic quick connect couplers with 3/8" Body + 3/8" NPT Thread, impoved design high flow performance and maximum service life.
  • The universal hydraulic quick connectt coupler interchange with 3/8" Body ISO 16028 standard flat face couplers..
  • Applications:used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,constructionindustrial hydraulic lines..
  • Non-spill flush face valves minimize fluid losses,with 5076 PSI Rating - 12.15 GPM Max Flow Rate.
  • Made by harden steel construction with zinc nickel plating for superior corrosion resistance ,and one hand push-to-connect operation.
Check Stock

Sinoblu 4pcs Shaft Collar Clamp Style Aluminum One Piece Shaft Stop Collars, 18mm Bore Size, 40mm OD, with M5 Set Screw, 12mm Thickness (Pack of 4)

  • Used for shaft fixing and positioning, Linear motion stopper and fixing the drill bit. Suitable for gearbox assemblies, motor bases, machine tools, drive shafts, agricultural implements, medical equipment, and paper and steel mill equipment, the automotive industry, the manufacturing industry, the hobby craft industry and many more..
  • Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required.
  • High quality aluminum alloy material, lightweight, surface oxidation resistant and corrosion resistant, durable and strong..
  • The shaft can be clamped-on tightly by set screw, the shaft will not be damaged.
Check Stock

1/2\ Skid Steer Bobcat Flat Face Hydraulic Quick Connect Couplers w Dust Caps,1/2\ NPT Thread+ 1/2 Body Hydraulic Couplers for Skid Steer Bobcat Case/Kubota/New Holland

  • ...uick disconnect coupler & plug interchange with most models of skid steers loaders including Bobcat Case / New Holland, Kubota couplings which made to ISO 16028 standard.
  • Applications:This flat face couplers connect used in the agriculture, construction, logging industries etc,skid loader attachment,hydraulic tools,Agricultural implements,equipment attachments, drain lines,construction，industrial hydraulic lines..
  • The flat face hydraulic quick connect couplers is valve design and structure for minimize pressure adrops and fluid losses. Sleeve locking mechanism prevents accidental disconnection..
  • Our bobcat skid steer hydraulic couplers are made by heavy duty harden steel construction with zinc nickel plating for superior corrosion resistance. 5076 PSI Rating , 12-23 GPM Flow Rate. Warm Tips: Make sure relieve all pressure on the skid steer from the lines before connect/disconnect them.Just line up the flat faced hyd fittings and push couplers to gather,male to female, female to male..
Check Stock

Category #1 Pat's Easy Change with Stabilizer Bar - Best Quick Hitch System On The Market – Flexible, Durable and Affordable - Comes w/ 4 Pair of Lynch Pin Washers

  • BEST QUICK HITCH SYSTEM ON THE MARKET- Absolutely No Other Quick Hitch Gives You This Much Flexibility For All Your Implements, Category#1 is 1-1/2” wide x 4” tall, 7/8” hole in the ball of the tractor.
  • TIME SAVING- No Changes Are Necessary For The Tractor Or Implements.
  • FLEXIBLE - Top Link Stays Flexible For Mowers Bushogs and Other Implements.
  • DURABLE AND ACCESSIBLE- Implements Not Parked Level Are Easy To Hook Up Accepts Post-hole Diggers.
  • AFFORDABLE AND MORE FOR YOUR MONEY- System Comes With 4 Pair of Cat#1 Lynch Pin Washers.
Check Stock

Behlen Country 80119995 3-Point Hitch N' Plow

  • Adapts Cat 1 3-Point implements normally for small tractors to truck, SUV, or UTV use.
  • With Hitch ‘N Plow you can attach many standard Category 1, non-PTO driven 3-point implements such as grader blades, landscape rakes and box blades using a standard 2″ receiver hitch.
Check Stock

Titan Attachments Green Category 2, 3 Point Quick Hitch Adapter

  • CATEGORY 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 2, 3 Point Hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point Hitch without any modifications, bolting, or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy! Note, the top link pin is not included..
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 4 x 4-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 2 Quick Hitch is powder-coated Green to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 4,000-pound lifting capacity and is 37.25-inches wide, stands 19.5-inches high, and has a depth of 9-inches. The lower lift pin hooks are 32.5-inches center to center and are 2-inches thick while the top hook is 1.25-inches wide. The implement weighs 97-pounds..
  • NOTE: This unit is designed to receive Category 2 implements and will receive Category 1 implements with the use of conversion bushings on your lower lift pins a....
Check Stock

Titan Attachments Category 2 Quick Hitch 3 Point Powder Coated Steel

  • CATEGORY 2, 3-POINT HOOKUP: This adapter is designed to convert your Category 2, 3 Point Hitch into a quick hitch. This allows you to easily connect your tractor to your 3 Point implements within minutes saving you time and labor..
  • NO WELDING OR MODIFICATION NEEDED: This adapter comes ready to attach directly to your Tractor’s 3 Point Hitch without any modifications, bolting, or welding required. Back your tractor right up to the back of the adapter, hook into the top link bar, and connect your lower lift pins. It is that easy! Note, the top link pin is not included..
  • DURABLE CONSTRUCTION: The quick hitch adapter is constructed with 4 x 4-inch tubular steel and reinforced with 9-Gauge steel gusset plates. The Titan Category 2 Quick Hitch is powder-coated Black to protect against rust and corrosion..
  • DIMENSIONS: This adapter is rated at 4,000-pound lifting capacity and is 37.25-inches wide, stands 19.5-inches high, and has a depth of 9-inches. The lower lift pin hooks are 32.5-inches center to center and are 2-inches thick while the top hook is 1.25-inches wide. The implement weighs 97-pounds..
  • NOTE: This unit is designed to receive Category 2 implements and will receive Category 1 implements with the use of conversion bushings on your lower lift pins a....
Check Stock

VEVOR PTO Shaft, 1-3/8' PTO Drive Shaft, 6 Spline Tractor, Round Implement Ends PTO Driveline Shaft, Series 4 Tractor PTO Shaft, 43'-61' Brush Hog PTO Shaft Black, for Finish Mower, Rotary Cutter

  • Sturdy and Durable: This PTO shaft is a well-forged series4 driveline shaft with CE certification. It consists of a solid 20CrMnTi carburized steel universal joint and a Q345 steel tube inside the shield. The PTO shaft is durable and robust when working with various agricultural machinery..
  • 6 Spline ＆ Round Ends: Constructed with a 6-spline tractor end and a round implement end, our brush hog PTO shaft has a standard size of 1-3/8 inches. It can match perfectly with the same size and type of implements and tractors, providing magnificent driving force for your machinery. Your machinery will be running like never before..
  • Adjustable Length: Compressed Length: 43″ / 1100 mm.
  • Extended Overall Length: 61″ / 1550 mm. The tiller PTO shaft is designed with a telescoping steel tube, a universal joint, and yokes. It has 35 Hp, 26 Kw, and 460 Nm torque at 540 rpm, while at 1000 rpm features 53 Hp, 39 Kw, and 360 Nm torque. It allows two sides of the PTO drive line shaft to spin at different speeds..
  • Easy Assembly＆Safer Use: As a high-efficient power transmission tool, our PTO extender shaft can be easily assembled for effortless direct replacement. The security chain and sturdy shield eliminate potential dangers in the transmission process..
Check Stock

Black Boar ATV/UTV Manually Lift and Lower Implements with Handle or Actuate Using a Drill and Socket 66013

  • compatible with all Black Boar Implements.
  • Manually lift and lower implements, or remove the handle and operate the lift with a drill and socket.
  • The parallel linkage design maintains correct implement angle as it is lowered.
  • Optimized design is easy to install by one person and minimizes adverse effects to maneuver.
  • Made of durable steel with a streamlined, minimalist design.
Check Stock