Categories

Best Air Compressor Brass Tube Fitting

Hhobake 12V 150db Air Horn with Air Compressor ,18 Inches Trains Horns for Vehicles, Car Truck RV Van SUV Motorcycle Off Road Boat

  • 【LOUD AND POWERFUL】The train horn blares out a loud and powerful warning. It can produce sound as loud as 150DB. The train trumpet offers a louder, more complex and pleasing sound Ideal for almost any weather condition, improve the safety of your travel..
  • 【HIGH QUALITY】-Newly upgraded compressor Equipped with a safety protection, will automatically shut off if the compressor goes above 176°F, and start back up when it gets back down to 158°F. The air horn is metal chrome plated material to ensure maximum strength and durability for long lasting usage.
  • It can work in a variety of temperature environments, no matter wherever you are..
  • 【120 PSI COMPRESSOR】 - This kit includes a compressor that has a 1.59-gallon tank and pumps up to 120PSI. When the pressure drops to 90 psi, the compressor will kick on and pump back up to 120PSI. And comes with 2 vibration pads to install under each leg when mounted, a 30 amp fuse, a petcock style tank moisture drain, and 3'ft of 3/8" air hose for the air horn hook-up that is to be used with the push lock fitting on the side of the air tank connecting to the push lock fitting on the air horn..
  • 【EASY TO INSTALLAT】It’s super easy to install!First,you fix the motor to a certain position on the car with....
Check Stock

NEIKO 30252A Water and Oil Separator for Air Line | 1/4' NPT Inlet and Outlet | 90 PSI | Air Compressor and Air Tool Accessory | Protect Lifespan of Pneumatic Tools | Water Moisture Filter Dryer

  • WATER SEPARATOR: An essential air tool accessory for mechanics and craftsmen that stops moisture, water, oil, and particles from entering air spray guns and other air compressor tools to keep your equipment in top performing shape..
  • OIL SEPARATOR: This air filter unit separates the oil from the air as it goes through your air hose the oil needs to stay inside the compressor to keep it lubricated while the compressed air needs to exit the compressor free of oil to ensure maximum air output to your air tools and increase reliability and lifespan..
  • MAXIMIZE PERFORMANCE: The inline oil water separator traps water vapor and dust to maximize the performance of air compressor tools for cleaner and more even jobs providing excellence in execution and saving you countless dollars in replacing expensive air tool equipment..
  • TRANSPARENT DESIGN: This air compressor in line dryer has a clear build that allows you to monitor the buildup and the amount of water and dust particles that this filter has trapped. Quick release valve conveniently located to removed anything trapped inside..
  • SPECIFICATIONS: Each in line air compressor moisture filter comes with a 1/4” NPT inlet and outlet for any standard air hose with a quarter inch fitting and can handle pressure to 90 p....
Check Stock

Winterize Sprinkler Systems And Outdoor Faucets Air Compressor Quick-Connect Plug To Female Garden Faucet Blow Out Adapter Fitting Solid Lead-Free Brass

  • Blowout plug adapter fitting to easily winterize underground irrigation sprinkler systems, outdoor pipes, water lines, homes, cabins, faucets,....
  • Its short and stubby design allows access to tight spaces. Quick-connect attaches to air compressor. Compatible with standard garden hose threading....
  • For your health and safety, this sprinkler winterizer is made of lead-free brass which contains less than 0.25% lead. Lead-free brass costs about 30%....
  • Easily connects to air compressor and garden faucet to winterize lawn sprinkler systems, drip irrigation system, soaker hoses, faucets, and plumbing....
  • This heavy duty winterization tool is machined from a solid lead-free brass casting. If you are looking for a quality tool that lasts a lifetime, this....
Check Stock

Camco TastePURE RV Inline Water Filter | Reduces Bad Taste, Odors, Chlorine, and Sediment in Drinking Water | 2-Pack (40045)

  • WIDE APPLICATION: Blowout plug adapter fitting to winterize systems, RV, outdoor pipes, boat, watercraft, camper, water line, watercraft, garden hose, camper, and travel trailer by blow out method using an air compressor..
  • EASY CONNECTION: Compatible with the most common used air compressor quick-connect(1/4" Industrial Interchange Air Quick Connect Plug) and standard garden hose threading (3/4" GHT Female or Male) in the US. Quick-connect attaches to air compressor to winterize lawn sprinkler systems, faucets, and plumbing to prevent damage due to freezing..
  • LEAD-FREE MATERIAL: For your health and safety, our sprinkler winterizer is made of lead-free brass with frosted parts of the highest quality. Durability brass, solid and durable made assure it will last you for years..
  • WINTERIZING PROTECTION TOOL: Easily remove water and winterize and avoid freezing pipes and lines, regent broken pipes - no costly repairs in the spring. Air is a great way to ensure all of the water is removed from the pipes and valves. Winterizing sprinkler blowout adapter allows you to get into small and tight places. Make easy to overwinter, more safe, healthy, and environmentally friendly winterization tool compared with those using antifreeze..
Check Stock

Viking Horns | Four Trumpet Air Horn (Black) | Super Loud (149dB) - [V4008B]

  • Horn Construction: 4 trumpets, metal trumpets and base in black color.
  • With a 12 volt heavy duty air valve solenoid and brass fitting connector.
  • Includes 1/4" air hose, and mounting hardware.
  • REQUIRES AN ON BOARD AIR SYSTEM TO OPERATE  (which consists of air compressor and air tank).
Check Stock

Wilkins 1/4' Male x 1/4' Female Test Cock TCS-14

  • 【Material】Brass material has corrosion resistance, high temperature ductility and low magnetic permeability. The handle is made of steel plated zinc and the most twist force is 12 LBS..
  • 【Wing Style】Winged style for easy to use with moisture drainage from tanks. External drain fitting for air and water service..
  • 【Perfect Replacement】To replace old or damaged drain cocks on compressor tanks. Brass Winged Tank Drain Cock is the perfect replacement for damaged or leaking drain cocks for pressure vessels on air compressors or air tanks..
  • 【Widely Applications】Suitable for use as an externally accessible drain in an air or water service application. Hose fittings are used in systems such as air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting and aviation..
Check Stock

LDEXIN Aluminum Alloy Air Compressor Exhaust Tube Replacement Copper Tone,15 mm/0.6' Hex Nut Inner Diameter

  • Features question mark shaped hook style, with two 15mm/0.6" (Inner Diameter) ID hex nut connector..
  • Air compressor tube made of copper material in copper tone, hex nut air compressor copper exhaust tube replacement..
  • Pressure relief tube connects the pressure switch to the check valve. This pressure relief tube is for air compressors..
  • Unplug the air compressor and bleed the air pressure from the tank before installing this part..
  • Used widely to connect air compressor, is easy to install. Hex Nut Size: 15 x 18 x 14mm / 0. 6" x 0. 7" x 0. 55" (Inner Diameter*W*H).
  • Total Size: 18 x 8 x 1. 3cm / 7" x 3" x 0. 5"(L*W*T)..
Check Stock

ARB CKMTA12 ARB505 On-Board Twin High Performance 12 Volt Air Compressor and E-Z Deflator Bundle

  • CKMTA12: Highest air flow rate of any 12V compressor of its size on the market at 174LPM [6.16CFM] // Full wiring loom included for simplified....
  • Motors are internally thermal protected against extreme temperature damage // Compressor pistons are equipped with a heavy duty European made....
  • ARB505: Corrosion resistant brass/stainless deflator tool // Quality bronze bourdon tube gauge design ensures accuracy is not affected by changes in....
  • Fully geared, solid brass precision movement // Easy to read dial with 1 pressure per square inch increments // Includes protective canvas pouch and....
Check Stock

Air Coupler and Plug Kit, Quick Connect Air Fittings, 18pcs 1/4\ Industrial Solid Brass Quick Connect Set

  • Couplers made of brass and plugs made of case hardened steel..
  • 1/4" basic body size with max pressure of 300psi..
  • Air fitting kit for air tools, air compressor, air nailer, air blow gun, pressure washer, air hose..
  • Fast and easy to install, you do not need any other toolsRecommended use with thread seal tape..
Check Stock

RAINPAL SSBF010 Stainless Steel Bulkhead Fitting (Female 3/4\ NPS, Left Handed Nut) (2)

  • Size and Number of Pieces: 1/4" 10pcs 3/8" 10pcs 1/2" 10pcs Tube OD.
  • Working Pressure Range: Maximum up to 150PSl. Working Temperature Range: '-40℉ to +200℉(-40℃ to +93℃).
  • Applications: Used with SAE J844 Type A and Type B nylon tubing in air brake system, or in cab air controls, except for where temperature is under -40℉(-40℃) or above +200℉(+93℃)or where battery acid can drip on tubing..
  • Advantages: Meet D.O.T.FMVSS 571.106 air brake specifications. Meet functional requirements of the SAE 246 & SAE J1131. Machined from CA360 brass. Easy to assemble (no tube preparation or flaring required.) Built in tube support. Can be used with copper tubing by NTA body with long nut and spherical sleeve. Insert should be removed.
  • Assembly Instructions: 1. Cut tubing as flat as you can. Maximum 15°angle is allowed. 2.Check the port of the mating part free of burrs or debris. 3.Slide sleeve and then nut on the tubing. 4. Insert the preassembled fitting into the tubing and the tubing should be bottomed to the seat of the fitting. 5. Tighten the nut by wrench until one thread remains visible of the fitting body..
Check Stock

WYNNsky Coiled Air Hose Nylon Material Anti-Corrosion Abrasion Resistance 1/4 Inch × 12 Feet 1/4 Inch NPT Brass Air Compressor Accessories Fittings 200PSI

  • Material: Nylon material, Anti-Corrosion, Abrasion Resistance, lightweight, Temperature range of -4 ℉ to +212 ℉..
  • Brass Air Fittings with Spring: 1/4 Inch NPT Male Threads Size, most common connection size, spring whcih fix the fitting can prevent bending....
  • Product Standard: 1/4 inch Inner Diameter, 12 Feet length, 200PSI Working Pressure, 800 Bursting Pressure, 1/4 Inch NPT Thread Size brass air....
  • Application: Suitable for air transportation, pneumatic devices, pneumatic tools, air compressors, etc..
  • WYNNsky Air Compressor Accessories: We're committed to providing outstanding value, top customer service and long-lasting, high-quality products to....
Check Stock

JACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)

  • Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
  • 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
  • Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
  • Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
  • Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock