Categories

Best Air Compressor Under 200

Rolair 1.5 Hp (115V), 7.3 Cfm@90Psi, 9 Gall Twin Tank Compressor (W/dual Controls)

  • 【Power Supply】110V single phase, Frequency: 60Hz, Power: 2.2kw / 3hp, Current: 10Amp （Instantaneous starting current: 15A）, Flow Rate: 100L/min / 3.5cfm..
  • 【 Portable Air Compressors】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
  • 【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
  • 【110V Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter, frame, isolator etc, the Lubricate Oil we recommend that ISO grade 100/150..
  • 【Paintball-compressor】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
Check Stock

DEWALT Air Compressor for Trim, 200-PSI Max, Quiet Operation (DWFP55130)

  • 3.0 SCFM delivered @ 90 PSI pump, 2.5 gallon tank and 200 max PSI of the portable air compressor enables large amount of nails to be fired and provides quick recovery.
  • Durable oil free pump of the electric air compressor provides extended maintenance-free operation.
  • Low 71.5* dBA of DEWALT portable air compressor allows for quieter operation (*Tested per ISO3744).
  • Low 12 amp draw motor provides easy start-up and reduces breaker tripping.
  • Lightweight (36 lbs), thin (12.5 inch) and compact design is easy to carry and store.
  • Compressor can be operated/stored in either the vertical or horizontal position.
  • Roll cage and control panel provide protection to key compressor components.
  • Dual quick couplers to easily support 2 nailers.
  • Ball valve drain allows for quick and thorough tank draining.
Check Stock

Monroe Shocks & Struts Max-Air MA785 Air Shock Absorber

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

EMAX 3 in 1 Air Compressor - 14 HP Air Compressor, Generator, & Welder with Electric Start & 5000W Generator - EGES14020T

  • SPECS AT A GLANCE - EMAX 14HP gas air compressor welder generator combination with 30-gallon tank, 24 cfm, and 210A welder. Ideal for job sites or outdoor activities..
  • MULTIPURPOSE - This versatile machine packs a 30-gallon air compressor, 200 amp DC welder, and 5500-watt generator, making it the perfect all-in-one solution for a wide range of jobsites..
  • RUGGED BUILD - Crafted with premium materials and advanced engineering, the EGES14020T is built to withstand harsh working conditions and offer dependable performance even under heavy use..
  • MOBILITY - Thanks to its compact and lightweight design, this machine is highly portable, allowing you to transport it with ease between different job sites and store it in tight spaces..
  • USER-FRIENDLY FUNCTIONALITY - With intuitive controls and a user-friendly interface, the EGES14020T is designed to provide hassle-free operation and easy maintenance, enabling contractors to focus on their work without worrying about the equipment..
Check Stock

Monroe Shocks & Struts Max-Air MA834 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting avoids air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA705 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA759 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA805 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA757 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA762 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

Monroe Shocks & Struts Max-Air MA700 Air Shock Absorber, Pack of 2

  • MAINTAIN RIDE HEIGHT UNDER LOAD -- Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission.
  • EASY TO ADJUST -- Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor.
  • pair with Monroe air shock accessory and shock air hose AK kits (varies by application).
  • EXCEPTIONAL HANDLING -- Full-displaced valving on compression and extension cycles for a smooth ride.
  • BUILT TO LAST -- Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction.
Check Stock

TUXING 4500Psi 300Bar High Pressure Diving Compressor PCP Air Compressor Auto Stop for Scuba Breathing Snorkeling Water Sport Paintball 110V 60HZ Single-phase

  • 【Power Supply】110V single phase, Frequency: 60Hz, Power: 2.2kw / 3hp, Current: 10Amp （Instantaneous starting current: 15A）, Flow Rate: 100L/min / 3.5cfm..
  • 【 Portable Air Compressors】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
  • 【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
  • 【110V Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter, frame, isolator etc, the Lubricate Oil we recommend that ISO grade 100/150..
  • 【Application】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
Check Stock

3 Feet Compressor Jumper Hose, 3/4 NPT Air Hose for Compressed Air Piping System,200PSI Rubber Air Compressor Hose

  • 3 Feet Compressor Jumper Hose,3/4" NPT Male x Female Swivel stain steel fittings，Suitable for most air compressors on the market.
  • Air Compressor Hose 200 psi rated,maximum temperature rating is 140 degrees Fahrenheit，Can easily be used indoors and outdoors.
  • Use as a jumper hose to take up vibration from the air compressor to a filter regulator or piping system.
  • High-quality rubber Air hose, can easily withstand bad weather, extending the life of the hose，Enables stable air delivery and professional results.
  • 1 year warranty service, for any reason not satisfied, we will be happy to resend you a new hose or complete a full refund.
Check Stock