Best Air Compressor Valve
TUXING 4500Psi 300Bar High Pressure Diving Compressor Gasoline Drive for Scuba Breathing Snorkeling Water Sport Paintball
- 【Specification】This is a gasoline-driven compressor,Flow Rate: 100L/min / 3.5cfm..
- 【Four stage cylinder air compressor】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
- 【Gasoline Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter etc, the Lubricate Oil we recommend that Food grade lubricants.
- 【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
- 【Paintball-compressor】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
Check StockHQMPC RV Winterize Adapter Blowout Adapter 1/4
- After sale service: If you have any questiosn fit our products, please contact service team, we will solve problems in time..
- Easy operation quick adapter fitting, screw the water lines to the female or male threading side, then connect the quick plug to an air compressor line’s female quick coupler. Turn on the air compressor, rotate around ball valve’s stem to open/close and modulate the air flow velocity to blow out the water from the water lines..
- Standard threading connector, 1/4″ quick connect air plug with 3/4″ GHT (male and female) Valve.
- Products use:This Winterize Blowout Adapter Connected with air compressor to press out the hose line water aviod inside water blow out the water line in winter , irrigation systems, RV, travel trailer, boat, camper, cabins, faucets, garden hoses.
- Packing Including: One Pcs 1/4″ Quick Connect Plug With 3/4″Female Valve,One Pcs 1/4″ Quick Connect Plug With 3/4″Male Valve, 4 Gaskets +1 Seal Tapes.
Check StockLF10-4H Pressure Switch, 4 Port Air Compressor Pressure Switch Replacement Control NPT1/4 95-125 PSI 20A
- ✅ [Size]--6.3 mm unloader valve connection, 1/4 inch NPT Female connection. Cut off pressure 95-125 PSI.With relief valve can avoid the overload operation of the air compressor..
- ✅ [Part number]--LF10-4H-1-NPT1/4-95-125.This pressure switch is designed for a single stage or two stage air compressor pumping up to 125 PSI..
- ✅ [More conveient to use]--The four-port manifold gives you the option to mount in it any direction and to also have the option to add a relief valve, gauge, or multiple air outlet ports..
- ✅ [Intelligent handle design]--The handle can be used to cut off air compressor and 4-port base simply the mountion of exhaust valve and pressure gauge.This switch features a built-in On / Off metal lever and also a unloader located on the side of the switch..
- ✅ [More safer to use]-- This switch comes preset to turn the compressor on at 95 psi and shut off at 125 psi..
Check Stock2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor
- Drain water thoroughly: our ball type drain valve can replace air compressor drain cocks, suitable for compressed air storage tanks to drain water or harmful liquids.
- It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
- 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
- Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
- Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
- Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
- Better work performance: brass mini ball valve is equipped with lever handle....
Check StockRolair 1.5 Hp (115V), 7.3 Cfm@90Psi, 9 Gall Twin Tank Compressor (W/dual Controls)
- 【Power Supply】110V single phase, Frequency: 60Hz, Power: 2.2kw / 3hp, Current: 10Amp (Instantaneous starting current: 15A), Flow Rate: 100L/min / 3.5cfm..
- 【 Portable Air Compressors】Air Compressor is equipped with four high pressure cylinder and can be compressed air maximum up to 20-30mpa/200-300bar/3000-4500psi, gauge pressure indicate, safe valve will be automatic leaking after full filling..
- 【Breathing Air Standard】This high quality air compressor can provide high-quality safe compressed air for human respiratory requirements for any industry that needs high-pressure pure gas source, meets the EU EN12021 and GB18435-2001 breathing air standard..
- 【110V Air Compressor】Air compressor consists of pump, motor, intake filter, belt, cool fan, oil separator & filter, safety valve, pressure switch, starter, frame, isolator etc, the Lubricate Oil we recommend that ISO grade 100/150..
- 【Paintball-compressor】Widely used in diving, fire fighting,outdoor construction,pipeline welding,container welding,scientific research and pressure testing,and laboratory,can also be used at PCP rifle paintball tanks..
Check StockJACO Lightning S2-Series Tire Air Chuck - 1/4\ F-NPT | Open Flow (2 Pack)
- ...e tire valve stem with absolutely ZERO air loss - eliminating any margin for error when precision matters..
- EASIEST TO USE - 360 swivel head eliminates tension on your air hose & lets you make adjustments without air leaks. Laser-cut 1/4" F-NPT fittings allow for seamless compatibility w/ tire gauges, inflators, and compressor attachments..
- OPEN FLOW - feature laser-cut threaded fitting (1/4 inch F-NPT) for compatibility w/ tire inflators & gauges to control air flow from compressor w/ precision for tire inflation (not recommended to attach directly to air compressor hose)..
- BUILT TO LAST - engineered by the experts at JACO w/ over 35 years of experience in the industry, and proudly backed by our 100% Lifetime Warranty. Experience firsthand the most revolutionary advancements to air chucks ever made with our exclusive Lightning Technology..
Check StockPrimefit CR1401G Replacement Air Regulator with steel-Protected Gauge, 1/4" Npt
- Material: plastic and zinc alloy and copper.Maximum voltage: 240V.Maximum current: 15 amp.Maximum pressure: 180 psi, 12 bars..
- Voltage (V): 240.Diameter of female thread: 1/4 PT.Features: Durable and useful..
- Diameter:about 5.91inch-7.09inch(150mm -180mm). Size: 4.13 inch x 3.15 inch x 2.64 inch (105 x 80 x 67mm).Applicable compressor type:Piston compressor..
- Easy to install and disassemble.With the barometer, can be set and read the data.With the valve button, you can adjust the atmospheric pressure as needed.Can help save electrical energy..
- Strong plastic shell and excellent performance.The air compressor pressure switch is an extremely imperative element, it is used to install or connect the air compressor or trachea, to regulate the air pressure, to start up The main role of this valve is to regulate the stop and start pressure of the air compressor.
Check StockDreyoo Lock on Air Chuck, 1/4” FNPT Heavy Duty Closed Flow Tire Chuck for Tire Inflator Air Compressor Air Accessory Kit, Standard Bore Valve Stem Quick Connector for Valve Adapter (1)
- Closed Flow: closed flow air chucks feature internal “check valves” that do not allow air to flow to or from the chuck unless the chuck is engaged with a tire valve stem, which makes them more efficient for using directly on an air compressor hose line, since they will not rapidly deplete the air tank unless engaged with a tire valve stem.
- Easy to Use: pushed forward the sleeve to lock the valve stem and pulled back the sleeve to release the lock on air chuck, it makes things easy that you can use one hand to seal and release the chuck.
- Standard Size: the top thread, 1/4 Inch FNPT.
- Heavy Duty: the lock on air chuck, made of steel and zinc, can prevent rust.
- The inside three claws are metal plating to protect them from oxidation.
- Wide Use: the top thread is standard size 1/4 inch FNPT, fit for most tire inflator air compressor, air accessory kit, air compressor accessories, inflator gauge compressor accessories.
Check StockJACO Bike Presta Valve Tire Air Chuck - 1/4" NPT (2 Pack) (Open Flow)
- Open Flow - these Presta valve attachments are open flow, meaning air will flow freely through the chuck even if not engaged with the tire valve stem (no check-valve). Must be used with an inline tire inflator gauge or standard tire gauge (Not for DIRECT connection to air compressor hose)..
- 1/4 inch F-NPT fittings - feature a standard 1/4 inch F-NPT fitting, making them compatible with inline tire inflator tools and tire gauges..
- Rugged & reliable - these straight angled Presta valve tire chucks are made of high-quality brass, providing a sturdy and reliable connection between your tire inflator tool and your bike tires..
- Presta valve compatibility - the air chucks are specifically designed to work with presta valve equipped bike tires, allowing you to quickly and easily inflate your tires (NOT for Schrader valve types)..
- Easy to use - simply attach them to any hand-operated, inline tire inflator tool connected to an air compressor hose, and start inflating your tires (NOT for use with floor pumps, hand pumps, or 12v air compressors)..
Check StockSAFELIFE Bike Straight Presta Valve Tire Air Chuck 1 PC, L-Type Schrader Tire Chuck 1 PC for Bicycles, Motorcycles, Medium & Small Cars - 1/4" NPT Open Flow
- Ready to use tire chuck air tool(2 pack), compatible with any gauge or air compressor using 1/4" NPT threading. L-type:1.34*0.63*1.77 inch.
- Built to last from solid brass, corrosion-resistant. Presta Valve bicycle air chuck features straight angle to get in between spokes of tires to access valve stem with ease. Schrader Valve car air chuck with 90 degree body easy access to hard-to reach tire valve stems..
- Straight air chuck engineered for bicycle tires that use Presta valve stem systems - including mountain bikes (MTB) and road bikes. L-type air chuck suitable Schrader valve tires for bicycles, motorcycles, and small and medium-sized vehicles..
- Open flow technology air flow freely through chuck, no check valve. Perfect for inflating tires by using an attached air compressor, or simply checking pressure and deflating by using a compatible tire pressure gauge..
- Package includes: 1 PC Presta Valve Tire Air Chuck.
- 1PC L-type Schrader Valve Tire Air Chuck.
- A reasonable combination meets your different needs..
Check StockA/C Compressor Control Solenoid Valve Replacement for 2013 2014 2015 2016 2017 Nissan ALTIMA 2.5 L SL SV
- FITMENT - A/C control solenoid valve Replacement for 2013-2017 Nissan Altima.
- A/C Compressor Control Valve made of high quality material, has experienced quality tested to ensure easy installation, optimal performance and durability enhancement..
- Please verify the control valve on your factory compressor looks like the part pictured. Please note that these AC kits will only fit the vehicles original OEM AC compressors and will not fit an aftermarket compressors.
- When the compressor solenoid valve doesn't blow cold. You should consider that whether there is a failure on your compressor solenoid valve. Replace the control valve on your with our replacement valve and your air conditioning will be good.
- Service-If you have any problem or issues, please without any hesitation to contact our after-sale service via email, we will do our best to help you.
Check StockEXELAIR 10 Piece Pistol Grip Inflator Gauge Kit, 1/4, EX0510PKIT
- Adjustable Pressure: Our PCP air compressor is made of copper wire and a 1800W motor. It can produce high pressure quickly and efficiently with a maximum pressure of 4500PSI. You can preset the pressure as you need, and the machine will stop automatically when the pressure reaches..
- Water Cooling: This air rifle compressor adopts a water-cooling system equipped with an LED temperature display. The perfect temperature ranges from 50℃~70℃. Once the temperature reaches 75℃, you must stop the machine and change the water. Note: The water container is not included..
- Various Safeguard: The paintball compressor features an explosion-proof valve, front and side fences, providing you more security and avoiding secondary hazards caused by improper use. Attention: To avoid danger, you must use the breathing valve to replace the oil plug before running the machine..
- LED Thermometer: This air compressor is equipped with an upgraded LED thermometer to monitor the temperature. Compared to the digital one, the LED display is more clear and does not require a battery. Moreover, the cylinder is made of stainless steel, which provides the machine a long lifespan..
- Various Application: The filtration device of the high pressure air compressor is a water & oil separato....
Check StockPowerNet XL Volleyball Wheeled Cart | Portable Hammock Ball Cart | Collapsible Rolling Training Equipment Basket | Lightweight Bin | Great for Indoor and Outdoor Use | Multisport
- What you will receive: 1 piece of air pump valve adaptor, 1 piece of Metal air pump converter, 4 piece of air valve nozzles converter. Lightweigh and easy to carry, the air valve adapter set can meets all your needs..
- Broad applicability: our air valve adapter set includes 4 different air nozzle converters. Round head nozzle fits inflatable beds, pools and boats. Sharp head nozzle fits swim rings and pool floats. Square head nozzle fits SUPs and dinghies. Spiral head nozzle fits kayaks and canoes..
- High quality material: the air pump valve adaptor and air valve nozzles converter are made of high strength hard plastic and alloy, nozzle air pump converter made of copper. These two materials are quite sturdy and durable,can be used for a long time..
- Easy to use: Choose the right nozzle for the adapter. Connect the air compressor hose to our adapter. Insert the adapter into the inflation port of SUP. Turn on the air compressor and start filling..
- Works great: It works great, could hold down the pin, and prevents back flow of air so you can get the right pressure. It will be a Indispensable accessories of your inflatable pontoon boat..
Check Stock