Categories

Best Air Cooled Spindle Motor

RATTMMOTOR CNC Router Spindle Motor 220V 2.2KW Square Air Cooled Spindle Motor ER20 4 Bearings 3-Phase 24000RPM 6A 400Hz for CNC Router Engraver Milling Cutting Machine

  • 【Simple discreption】This is a 220V 2.2KW Square air-cooled spindle motor come with a ER20 nut and collet. Current is 6A, frequency is 400HZ,....
  • 【Spindle speed】The speed of the spindle motor is 0-24000RPM. Because it is a high-speed spindle motor, the spindle speed must not be lowered than....
  • 【How to wring it to Inverter】The spindle’s terminal U1, V1, W1 are connected separately to inverter’s terminal U, V,W. Connect any 2pin....
  • 【Note】Before driving, turn the shaft by hand first. The temperature's rise caused by the high-speed rotation of the spindle motor can be....
  • 【Main application】Wood, Aluminum, Glass, PVC industry.The Spindle motor is mainly suitable for NON-metallic engraving..
Check Stock

RATTMMOTOR CNC Spindle Motor Kit 2.2KW 80mm Water Cooled Spindle Motor 220V ER20 400Hz 24000RPM+2.2KW VFD Drive Inverter 220V+80mm Spindle Motor Mount Clamp+ER20 Collets+80W Water Pump for CNC Router

  • 【Package Include】: ①1 x 2.2KW 220V Water Cooled Spindle Motor ②1 x 2.2KW VFD 220V ③1 x 80mm Spindle Motor Mount(with 3pcs screws) ④1 x 80W....
  • 【2.2KW Spindle Motor】: ①This is a 220V-2.2KW water-cooled 8A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a 80mm....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 220V 0-50Hz/60Hz. Output：3 phase 220V 0-400Hz. Communication....
  • 【Multi-Protection Functions of VFD】Including overload protection, FUSE broken-motor stops protection, over-voltage / low-voltage protection,....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

CNC Spindle Motor Kits Square 110V 1.5KW Air Cooled Spindle Motor 1.5KW VDF 2.75Inch bruches 40Inch Electric Wire,13 pcs ER11 Collets for CNC Router Engraving Milling Machine

  • ✅Technical Parameters: Spec: Φ3.13-9.4inin (Diameter: 5.4cm x Length: 23.9cm).
  • ✅Air Cooled Spindle: High-speed electric main bearings used in all C class high-speed angular contact ball bearings, axial pre-load feature,....
  • ✅Package include: Square Spindle Motor, Inverter, ER11 Collet.
  • Drill Bits, electric wire. Our air cooled spindle is widely engrave for wood,....
  • ✅Support: We offer 1 year warranty. If you get stuck, contact us with any questions that arise, our customer service team are waiting for helping....
Check Stock

CNC Spindle, MYSWEETY 500W Air Cooled 0.5kw Milling Motor and Spindle Speed Power Converter and 52mm Clamp and 13pcs ER11 Collet for DIY Engraving

  • ️【CNC Spindle kit 500W】- 1 x 500W Air-Cooled Spindle Motor, 1 x AC110V/220V Speed Governor with MACH3, 1 x 52mm Mount bracket, 13 x ER11 collect, 10 x V Bit Cutter, 4 x Screws(free)..
  • ️【500W CNC Spindle motor】- Operating voltage: 100VDC, Power: 500W, Input: AC110V, Speed: Up to idle up to 12,000 rev / min, Torque: 5000G/CM. Insulation resistance:> 2 megohms, Dielectric strength: 400V. Motor Length: 200MM, High precision spindle run out 0.01-0.03..
  • ️【Speed Power Switch】- Input voltage: AC110V/220V, 50/60Hz. Output current peak: 6A. Output voltage: DC0-100V. Please install in the place that is draughty, no dramatic impact, no vibration, no explosion hazard medium, no conductive metal particle..
  • ️【 52mm Mount Bracket】- Made of high quality cast aluminum, this spindle motor bracket clamp is strong and durable. Diameter: 52mm, Chuck portion length: 45MM, Chuck portion diameter: 16mm..
  • ️【ER11 Collet Chuck】- 13Pcs ER11 Collet Set Gripping Range: 1MM to 7MM(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm). Run-out tolerance 0.01mm. For CNC milling Lathe Tool & Work holding Engraving machine..
Check Stock

Galapagoz Drill Paddle Water Cordless Kayak Canoe Boat Raft Light Weight Trolling Motor Fishing USA

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm) +10Pcs Nano Blue Coat End Mill CNC Router Bits, 0.8-3mm, 1/8" Shank+ aviation wire+power wire+2pcs wrenches.
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • Advanced dynamic balance technology effectively reduce the noise and increase stability in the working process.
  • Runout off less than 0.005mm that 10 times precision beyond normal spindle motor..
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete accessories including pre-soldered aviation wire with connector and power wire, It will take just 5 minutes to install all and make all functions running..
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized processing center, high speed centrifuge etc..
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied and get all problems resolved..
Check Stock

MYSWEETY 110V 1.5KW Water Cooled Spindle Motor CNC Spindle Motor +1.5KW Converter + 65MM Clamp Mount + 13pcs ER11 Collet + 5M Water Pipe + 110V Water Pump

  • ✅ Package include: ①1 x 1.5KW 110V Spindle Motor ②1 x 1.5KW 110V VFD ③1 x 75W 110V Water Pump ④1 x 196 in Water Pipes ⑤1 x 2.6 in Spindle Motor Mount ⑥1x40 in Electric Wire ⑦10 x Drill Bits ⑧1 x2.8 in Brushes ⑨13 x ER11 Collet(1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm).
  • ✅1.5KW Spindle Motor：Technical Parameters:φ1.16 x 10.5in (Diameter: 2.95cm x Length: 26.7 cm).
  • Weight: 7.05 ib. The spindle motor applied to Lathes, Mills, Car Hoists, Pumps & Conveyors, etc. Used for engraving machine or used with frequency converter..
  • Output Current: 5A. The machine is screwed to ensure the safety and reliability of the use. DC cooling fan low noise, large air volume.The converter has overload protection, overvoltage protection overheat protection etc..
  • ✅75W 110V Water Pump：Power: 75W, Flow: 3000L/H, Hmax: 3.5M, Voltage: 110V/60HZ, Size: L4.8xW3.5xH4.3 in. This is a high-performan....
Check Stock

RATTMMOTOR 2.2KW CNC Air Cooled Spindle Motor ER20 80mm Spindle 220V High Speed 24000RPM 3HP 400HZ for CNC Router Engraver Milling Cutting Machine

  • The 2.2KW air-cooled spindle motor's 220V, 8.5A, 400HZ frequency, less than 0.05mm runout off, 0-24000RMP speed..
  • It should be noted that the spindle speed must be kept above 9000 rpm, otherwise the spindle will be damaged..
  • It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine..
  • This spindle is designed with a dustproof and waterproof cover, the body is made of stainless steel, and the rear is equipped with a cooling fan,....
  • It contains 4 bearings, high-precision grinding taper hole, high-precision, low noise..
Check Stock

CNC Spindle Motor Kits,220V 1.5KW ER11 Square Air Cooled Spindle Motor CNC Spindle CNC Motor + 220V 1.5KW VFD + Collets Set ER11+ Wires + Drill Bits+Wrenches for CNC Router Machine

  • 【Package list】 :1pcs 220V ER11 1.5KW Square air cooled spindle motor +1pcs 220V 1.5KW VFD +13pcs Collet ER11(1mm-7mm) + 10pcs Drill Bits(0.8-3mm,....
  • 【Easy and fast to assemble 】: Our VFD has been pre-setting up, the spindle is with 8 hole installing holes, we offer complete accessories that....
  • 【Longer working life】: There are Authentic 4pcs steel bearings comparing with 3 bearings of other suppliers, significantly extend working life 3....
  • 【High precision】:We make further processing for high accuracy & concentricity, the runout off of our spindle motor is less than 0.005mm that 10....
  • 【Warranty assurance】:We have 20 years manufacturing experience , pls contact us for any question or problem. We are proficient in customizing....
Check Stock

RATTMMOTOR 110V Water Cooled Spindle Motor Kit 2.2KW ER20 Spindle Motor φ80mm 24000RPM+2.2KW VFD 110V Inverter Variable Frequency Drive+80mm Spindle Mount+80W Water Pump for CNC Router Milling Machine

  • 【2.2KW Spindle Motor】: ①This is a 110V-2.2KW water-cooled 15A Φ 80x213mm spindle motor come with a ER20 nut and collet, and equipped with a....
  • 【2.2KW VFD Parameters】Control Model: SPWN. Power: 2.2KW. Input：1 or 3 phase 110V 0-50Hz/60Hz. Output：3 phase 110V 0-400Hz.Under normal....
  • 【80mm Spindle Motor Mount】Material is aluminum,surface sandblasted. Compared with the aluminium profile fixture,the accuracy is much eavier, much....
  • 【80W 110V Water Pump】Power:80W, Flow: 3500L/H, Hmax: 3.5M, Voltage: 110V. Also suitable for 0.8KW, 1.5KW, 2.2KW, 3KW and other high speed CNC....
  • 【How to Connect Spindle Motor and VFD】The spindle motor's aviation plug marked with number 1, 2, 3, 4. Number 1, 2, 3 port are connected....
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Water Cooled Er20 Collet Chuck CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Water-cooled Motor Spindle and Matching Inverter.
  • Four bearing in our spindle motor (2pcs 7005+2pcs7002).
  • 2.2kw Water-cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock

Zhong Hua Jiang CNC Spindle Motor Kits 110V 2.2KW Air Cooled Spindle Motor+110V 2.2KW VFD+Φ80mm Clamp Mount + ER20 Collet kit+ Drill bits+ wire+ wrenches for CNC Router machine

  • 【PACKAGE INCLUDE】-1pcs 110V 2.2KW air Cooled Spindle Motor +1pcs 110V 2.2KW VFD inverter+ 1pcs Φ80mm Clamp Mount +13pcs ER20 Collet(1mm-13mm)....
  • 【ADVANTAGE 】- Authentic 4pcs upgraded steel bearings significantly extend working life 3 times longer than ordinary spindle motor.
  • 【EASY AND FAST TO INSTALL 】-The VFD had been pre-programmed for basic parameters , you don't need to make extra setting up.We offer fully complete....
  • 【APPLICATION】-Wood/ Copper/Brass/Aluminum/PVC/Plastic/ carving/engraving machine, advertisement engraving machine,CNC router machine, small sized....
  • 【WARRANTY ASSURANCE】-We have 20 years manufacturing experience in this field, any question or problem , pls contact us ,we will get you satisfied....
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock