Categories

Best Air Flow Equipment

AmeriFan Duct Booster Exhaust, for Growing, Hydroponics, Heating, Cooling, Venting, HVAC, Steel, 120V Supply Voltage

  • Industrial grade design and manufacturing means performance and durability: high air flow even against 25 feet of pipe and several elbows. Warrantied by tjernlund products, established 1938.
  • Cfm per watt (air flow efficiency) meets or exceeds requirements for energy star rating.
  • Engineered by Fan Experts Based at Tjernlund’s Minnesota Factory. Premium Fans Sold Factory Direct–Not Pay and Pray Mystery Fans.
  • Includes mounting hardware, 6 foot cord, and electrical instructions for integrating any additional controls.
  • Perfect for heating/air conditioning duct, factory exhaust, grow rooms, greenhouses, hydroponic farming, general factory exhaust or cooling of hot air in buildings and on equipment.
Check Stock

Watts Premier WP116187 Top Mount Twist Air-Gap Monitored Faucet, Brushed Nickel

  • ...imately 3 feet in length for the connection to the drain.
  • PLUMBING CODE: This Faucet requires access to a drain connection. The Faucet conforms to all US Plumbing Codes. US Plumbing Code (5-202.13 Backflow Prevention, Air-Gap. An air gap between the water supply inlet and the flood level rim of the plumbing fixture, equipment, or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 1 inch)..
  • See attached installation manual in the Technical Details section.
Check Stock

H.A.K. PNEUMATIC Air Filter Regulator – ½” NPT Poly Bowl Compressed Air, Water Filter Lubricator Combo | Water/Oil Trap Separator | 0-140PSI | 2 Micron Brass Element

  • ...sses from the Compressor is cleaned by an Air Filter. The Two Brass pipe fitting available..
  • EFFECTIVE AIR FILTER: H.A.K. PNEUMATIC Air Compressor Regulator Filters the moisture and tiny particles from the air to preserve air tools including spray guns, nailers, airbrushes, tyre compressors, inflators, and pneumatic equipment. The air flow direction has mentioned in the images. Air in from Left side and get out from right side..
  • EASY TO INSTALL This Pressure gauge comes with Good Impact Locking Composite Knob Inlet Outlet Port to Indicate Position Circulation. Compressed Air Gas Water Filter also have Two 1/2" Brass Pipe Fitting Straight Connector Adapters and Tread seal Teflon tape..
  • AUTO LUBRICATION & PRESSURE RANGE: The lubricator plate allows atomized oil to be delivered to lubricant air tools to improve durability and work efficiency. The Pressure range of our Pressure Regulator is 0~140PSI & Rated flow is 500L/MIN. There is an option of adjusting the air pressure..
  • CUSTOMER'S SATISFACTION: We guarantee everything we make. Our Primary Priority here at H.A.K. PNEUMATIC is your happiness &100% Satisfaction, which means we stand by our Air Filter Regulator. If you face any problem, please reach to us we will provide you the best possible solution. We a....
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 1:1 Fast High Flow Rate 8.5GPM / 32LPM for SAE130 Oils/Fluids

  • PROPER USE & SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall-mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Lubeworks Oil Transfer Drum Pump Double Action 3:1 Fast Flow Rate 7.4gpm / 28lpm for SAE130 Oils/Fluids

  • PROPER USE and SAFETY - All our pumps come with a 2" inch Adjustable Bung adapter, for easy installation for barrel mounted applications.
  • This pump can be barrel, cart or wall mounted.
  • A Wall Mount Kit or Extension Tube Kit are Sold SEPARATELY.
  • Follow manual for setup and always use the proper additional equipment as listed in the manual when installing pump and always wear protective glasses/goggles or gear when operating equipment.
Check Stock

Tetra Whisper Easy to Use Air Pump for Aquariums (Non-UL)

  • ...t oxygen for your aquarium up to 4.5 feet deep, can be used for tanks from 20 to 180 gallons, up to 3 applications.
  • 【Adjustable Flow Control】: build-in control knob, this fish air pump allows you to adjust the air flow to optimize the performance of your air pump drive equipment, appliance or ornaments. (Please note: Air tubing not included.).
  • 【Run Two devices Simultaneously】: Two outlets fit for 3/16’’ standard airline tubing, it can be running with 2 applications simultaneously so you never have to worry about your fish not getting sufficient air. Designed to work for marine and freshwater.
  • 【Low Noise Level】: ABS thick shell and sealed inner baffle greatly reduces noise, while the soft rubber foot pad can effectively cushion the vibration produced by the motor.
  • Low Consumption and Easy-To-Use】This aerator measure 4.57 x 4.8 x 3.03 inches. Pressure: 0.02 MPa, Power: 5W. Just connect air pump to air tubing to air stones, protein skimmers or sponge filters, plug it and you're ready to go..
Check Stock

Scubapro MK25 EVO/S620 Ti Diving Regulator System DIN 300

  • Smaller and lighter than the S600 but using the same-sized diaphragm, The S620 Ti delivers instant air on demand with Super inhalation sensitivity..
  • An air-balanced flow-through piston housed in a chrome-plated brass body provides constant airflow unaffected by depth, tank pressure, or breathing rate..
  • Scubaproâ€s patented extended thermal insulating system insulates the inner mechanism, improving cold-water resistance without compromising breathing performance..
  • The regulator includes two opposing high-pressure ports that let you position the first stage up or down, along with four high-flow and one axial super-high-flow low-pressure ports..
  • Driven to constantly innovate and improve the diving experience, Scuba builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface..
Check Stock

Premium Bunsen Burner, Natural Gas - Flame Stabilizer, Needle Valve Gas Flow Control - Suitable for use with Natural Gas - Eisco Labs

  • PREMIUM QUALITY || Premium quality Bunsen burner with both air mix adjustment and gas flow adjustment.
  • FOR NATURAL GAS || Suitable for use with Natural Gas (methane). Burner comes equipped with a serrated inlet arm that accepts 6-8mm tubing.
  • DIE CASTED BASE || Aluminum mixing tube is mounted on a circular, die casted zinc alloy base.
  • ADJUSTABLE || Equipped with a flame stabilizing burner tip, and air ports with collar to adjust the flow of air. Gas flow is controlled by needle valve fitted above the base, permitting easy flame adjustment.
  • MANUFACTURED BY EISCO LABS || Eisco Labs proudly manufactures its own products using state-of-the-art equipment, and following the highest standards of quality control. Each product is carefully designed by a team of laboratory professionals and experienced engineers with quality and durability in mind.
Check Stock

TeeJet 23120-3/4-PP Pressure Regulator with 200 PSI Pressure Gauge (Bundle, 2 Items)

  • Gas Type- 2 Positions, LPG 10" W. C & NG 4" W. C, Max inlet pressure PSI: 1/2 (3.5KPa), Gas Flow: 120,000BTU/ Hr. Adjustable outlet pressure 4" &10" Water Column..
  • Fitting- in 1/2" x out 1/2" NPT Pipe threads. When apply to LP gas, it needs to work with an external regulator (NOT supplied). Install the external regulator between the propane supply source and Maxitrol regulator..
  • Safety - Our Pressure Regulators Pass CSA certificate for your safety. no gas leaks, ensures safety while using grill, air flow is kept stable and at appropriate levels..
  • Applications- Stable Gas flow, for Natural LP Gas grills, heater, oven, Gas Welding Equipment, NG gas pressure regulator.
  • Please take the Hex Screw out to check it's the correct side for your application. LP side and NG side is different. Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulator..
Check Stock

Mann Filter C 32 130 Air Filter

  • Original equipment part number 8K0 133 843 E.
  • Filters harmful particles such as dust, pollen, sand, soot or even drops of water out of the intake air.
  • Specially embossed paper for good pleat stability and reducing intake noise.
  • Balances the air flowing towards the air flow meter and seals off adjacent components.
Check Stock

Mann Filter C 4312/1 Air Filter

  • Original equipment part number 000 090 37 51.
  • Filters harmful particles such as dust, pollen, sand, soot or even drops of water out of the intake air.
  • Specially embossed paper for good pleat stability and reducing intake noise.
  • Balances the air flowing towards the air flow meter and seals off adjacent components.
Check Stock

Scubapro MK25 EVO/S620 Ti Dive Regulator System INT Black One Size

  • Smaller and lighter than the S600 but using the same-sized diaphragm, the S620 Ti delivers instant air on demand with super inhalation sensitivity..
  • An air-balanced flow-through piston housed in a chrome-plated brass body provides constant airflow unaffected by depth, tank pressure, or breathing rate..
  • SCUBAPRO’S patented Extended Thermal Insulating System insulates the inner mechanism, improving cold-water resistance without compromising breathing performance..
  • The regulator includes two opposing high-pressure ports that let you position the first stage up or down, along with four high-flow and one axial super-high-flow low-pressure ports..
  • Driven to constantly innovate and improve the diving experience, SCUBAPRO builds flawless equipment for the work, sport, and lifestyle of people whose passion is found below the surface..
Check Stock

Honeywell S688A1007 Sail Switch

  • Simplified installations with multi-speed fans, in- accessible air handlers, fan motors with voltage or phase different from controlled equipment.
  • Polyester film sail mounted on a micro switch snap switch.
  • Removable spring counterbalances sail to allow mounting in either vertical (up or down) or horizontal air flow.
  • Low air velocity switch operation makes at 250 fpm and breaks at 75 fpm.
Check Stock