Categories

Best Air Gage

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Telescoping Gage Set, 6Pcs Precision Telescopic Gauge 8-150mm Adjustable Inner Diameter Gauge Micrometer Measuring Tools T-Bore Hole Gauge

  • ...ct are head treated steel and precision ground to a radius allowing proper clearance on the smallest hole the gauge will enter..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface. Self centering telescoping gauge has high rigidity, good wear resistance. Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】 Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Scope of Application】 Telescopic spring piston in the hole (or groove), can conduct inner diameter detection, used with micrometer or caliper, with knurled locking device..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

Forster Products 5.56 NATO MIN and MAX Headspace Gage Set

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

HFS(R) 6 Pc Precision Telescoping Gage Set 5/16\ - 6\ Range T-Bore Hole Gauges w/Pouch

  • [MATERIAL]: It is made of carbon steel with chrome plating on the surface.
  • [PACKAGE INCLUDE]: Range: 5/16" - 6" (8mm to 150mm),6PCS in total(1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall).
  • [OPERATION METHOD]: Use the gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with micrometer or caliper to determine the final hole size.
  • [HIGH PERFORMANCE]: The rigid handle and double acting design (automatic centering) can quickly check the internal dimension. The spring tension is constant and the hand feel is even..
  • [APPLICATION]: It is used to obtain the exact size of holes and slots, which is suitable for factories, schools, offices and other places.
Check Stock

52Pcs Stainless Steel Thread Measuring Gage, Precise Screw Thread Measuring Gage Pitch Measuring Tool 60 Degree (Metric& Imperial)

  • [Adjusted Freely]: Thread measuring gage is using rotary switch, which can be freely adjusted. Mini size and compact, the pitch measuring gage won't occupy too much space, carry it around easily with the convenience.
  • [Magnetic Head]: The thread plug gage, through quenching processing, strong hardness, head with a magnetic. Narrow-leaved designed to measure the external and internal threads - even in small holes.
  • [Precise Measurement]: Thread measuring gage comes with precise measurements and simple design, which can be widely used and durable. Measuring range: 0.25 - 6.00mm/0.0098" - 0.23".
  • [Best Checking Angle Tool]: Stainless steel thread measuring gage is useful for checking tool angle while cutting threads in metal turning lathes. Applied to measure thread and external thread tooth pitch, a great measuring tool for your working.
  • [Premium Stainless Steel Material]: Made of premium stainless steel material, this measuring gage is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
Check Stock

CZC AUTO Pencil Tire Pressure Gauge, Dual Head Trucks Air Gage, Accurate Mechanical Dually Chuck Wheel Service Checker, Stainless Steel Stem for Car RV ATV Motorcycle Bike, 10-120PSI (Silver, 2 Pack)

  • WHY YOU NEED A AIR GAGE: A reasonable inflated tire save fuel, increase the tire's lifespan, improve the driving experience, and insure the driving safety. Please use tire gauge to test the wheel pressure every week regularly when the tire is cold, especialy before long distance travel. Great gift for father's day..
  • DUAL HEAD CHUCKS DESIGN: CZC AUTO wheel air gage is equiped with two zinc alloy head push-pull chucks, 30 degree forward head is specially designed for inner/single wheels or hard-to-touch valves, and 30 degree reverse chuck for outer wheels. 6" long stainless steel stem, allow you to reach the inner wheels without dirty your hands..
  • ACCURATE PREESURE GAUGE: 4 sides white ABS scaleplate with black clear marks scale 10-120PSI, perfect for truck, bus, car, suv, rv, atv, bike (with schrader valve) or motorcycle. Pocket-size pencil style and pocket clip are desiged for easy storage. There are also 4 free plastic valve stem caps for replacement..
  • EASY TO OPERATE: Twist off the valve cap, press the mechanical tire gage chuck to the valve, then the scaleplate will slip out and you can read the tire pressure from the scaleplate. After using, please twist on the valve cap and push the scaleplate back. No battery needed. For sedan, 28-35PSI is pe....
Check Stock

HFS (R) 81PCS Grade B GAGE Gauge Block Set

  • [Packing]: 81 Pieces. 9 blocks: .1001-.1009" in .0001" steps.
  • 49 Blocks: .101-.149" in .001" Steps, 19 Blocks: .050-.950" in .050 steps, 4 Blocks: 1-4" in 1" steps.
  • [Material]: Set made of fully seasoned alloy tool steel with hardened to 65 RC to provide both long wear and resistance to stains and rust.
  • [Instructions]: Blocks manufactured under carefully controlled conditions, allowing for the highest degree of accuracy when used at room temperatures of 68 degrees F (20 degrees C).
  • [Grade]: All gage block sets are certified by an accredited ISO-17025 Gage lab with long form certification. Individual serial numbers on each block, regardless of grade.
  • [Application]: Gage blocks are commonly used to calibrate fixtures and precision instruments in workshop, inspection, and dimensional metrology applications, to inspect tools such as mounting tools, cutters, fixtures, and mechanical parts, and in the gage manufacturing process itself. Grade B gage blocks are commonly used in workshops for calibrating and inspecting mounting tools and cutters.
Check Stock

Nathan Zipster Running Belt.Bounce Free Waist Pack. Pockets with Zippers. Runners Fanny Pack. Fits All iPhones, Android, Samsung etc. for Men and Women

  • 5.56 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. The 5.56 NATO maximum chambering requires a slightly longer headspace than the commercial 223 cal. Rem..
  • GO/MINIMUM LENGTH: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo. NATO Minimum rifle chamber gages check to see that the rifle will accept the longest (headspace dimension) NATO ammunition cases that are currently manufactured..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455".
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015. Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
Check Stock

308 Winchester Headspace Gauge Set GO and NO-GO

  • 243 WIN: Use to check headspace of 243 Win., 260 Rem., 7mm-08, 308 Win., 338 Fed, & 358 Win..
  • RIMLESS CARTRIDGE HEADSPACE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. Headspace in a rimless cartridge is the distance between the bolt face and a datum line, determined by SAAMI, where the front of the cartridge rests on its shoulder when the bolt is closed..
  • NO-GO: Corresponds to the maximum headspace we recommend for gunsmiths’ chambering new bolt-action rifles. This is not a SAAMI-maximum measurement. If a rifle closes on a NO-GO gage, it may still be within SAAMI specifications, or it may have excessive headspace. To determine if there is excessive headspace, the chamber should then be checked with a FIELD gage. The NO-GO gage is a valuable tool for gunsmiths’ reaming new chambers, in order to ensure tight and accurate headspace.
  • GO: Corresponds to the minimum chamber dimensions. If a rifle closes on a GO gage, the chamber will accept ammunition that is made to SAAMI maximum specifications. The GO gage is essential for checking a newly-reamed chamber in order to ensure a tight, accurate, and safe chamber that will accept SAAMI maximum ammo..
  • PRECISION MACHINED: Manufactured from top-quality, hardened ....
Check Stock

Shaping Hair Cream For Men - 2 oz | Hair Gloss, Hair Texturizer Styling Gel, Hair Smoothing Cream | Hair Products For Men

  • GAGE SHAPING HAIR PASTE FOR MEN: GAGE hair molding paste adds thickness and texture with a matte finish and strong, pliable hold..
  • MATTE/NATURAL STYLING EFFECT: The hair gel for men gives you a strong hold with a matte finish without making them look too hard..
  • SUITED TO: Gage paste hair cream for men is suitable for all hair types. This styling cream is ideal for sculpting and molding your hair to strong hold styles..
  • DIRECTIONS: Apply this hair texturizer paste sparingly to damp or dry hair. Shape and form any style..
  • GAGE FOR MEN: A clean, modern, and timeless brand for today’s man. From the best styling products to high-performing shampoos and conditioners, GAGE for Men is your go-to. Modern, simple hair products for men..
Check Stock

Accusize Industrial Tools 81 Pcs Steel Gauge Block Set, Grade B, P900-S581

  • 81 pc Grade B Steel Gage Block Set with MFG'S certificate.
  • Manufactured under carefully controlled conditions allowing for the highest degrees of accuracy when used at a temperature of 68 degrees F. (20 C)..
  • All gage block sets are assigned serial numbers and accompanied with a certificate of inspection listing the deviation for each block.
  • Each gage block set meets or exceeds federal specification ASME B89.1.9-2002..
  • Hardened to HRC 64 / All gage block sets are made to special standard to resist corrosion and defacement.
Check Stock

Forster Products NATO Chamber Headspace Gage, Rimless, Hardened Steel, Precision Ground, 7.62 NATO Maximum

  • 7.62 NATO CHAMBER HEADSPACE GAGE: The proper use of Headspace Gages is the most reliable way to test rifle chamber length. These rimless chambers require a slightly longer maximum headspace than commercial 308 Win calibers. The 7.62 NATO Headspace Gages do not conform to SAAMI tolerances..
  • MAXIMUM LENGTH: The Forster NATO Maximum rifle chamber gage checks to see that the rifle does not have excessive headspace, which could lead to dangerous pressure problems. The NATO Maximum Headspace Gage measures 1.6455″.
  • PRECISION MACHINED: Manufactured from top-quality, hardened steel and precision ground to ANSI and SAAMI tolerances. Headspace tolerance ground to a very exacting ±.00015..
  • QUALITY ASSURED: Each Headspace Gage thoroughly inspected with NIST-certified measurement tools to ensure the highest quality product..
  • MEASURING MEANINGFUL HEADSPACE: Properly speaking, and for safety purposes, one measures “headspace” as the difference between the length of a standard cartridge, as represented by a gage, and the gun’s actual chamber length , when the head of the cartridge is flush against the bolt face..
Check Stock

Shorpioen 255-Pack 6-18 x 1 1/2 Phillips Bugle Head Fine Thread Drywall Screw Black Phosphate BC-0624YPG

  • Fine thread Drywall--Sharp point: For attaching drywall to metal studs from 25 gage through 20 gage thick.  Longer sizes are ideal for multiple layers or insulation. Fine thread Drywall--Drill point: Will drive easily through drywall, drill a hole in a steel stud up to 14 gage thick, and form its own mating thread.  Can also be used for attaching plywood or insulation board to 14 gage metal.
  • Screws shall be quenched in liquid and then tempered by reheating to 650°F minimum.
Check Stock