Categories

Best Air Hose Fitting Kit

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 10 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 19” Longest Length (not including fittings) x 9” x 14” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 21 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34” Longest Length (not including fittings) x 9” x 16” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thre....
Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 40 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 39 1/2” Longest Length (not including fittings) x 13” x 18” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe....
Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male ....
Check Stock

KOOTANS 29.5FT(9M) Truck Dust Air Blow Gun Kit Long Air Hose Coil Air Seat Blow Gun Kit Heavy Duty Air Duster Blow Gun Dust Cleaner with Long Nozzle

  • Designed for vehicles with an air ride seat system, the air seat blow gun kit is used to clean from the cab to the sleeper. Makes cleaning your truck cab easy. Contain air blow gun, brass tee fitting, long nozzle, PU air hose, teflon tape..
  • 29.5FT translucent PU air hose: It's softer, resists kinking, abrasion, durable. Burst pressure up to 120 PSI, it allows for high air flow to tackle a variety of applications and projects. Air hose coil won't break and leak in bad weather. It's great for bending and stretching in use..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more. 2 interchangeable nozzle tips, for different places, spacious or narrow spaces. Plastic hanging hook, easy to use and convenient for placing and storage..
  • Use on trucks, buses, utility vehicles, seat airlines, with air ride seat systems. It helps with dust, debris, dirt in the vehicles..
  • Note: the air blow gun fits OD 0.24 inch air hose, If there is a gas leak, check the diameter of your hose and check whether each connection is tightened. Can use teflon tape to create air tight connections..
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

Camco TastePURE RV Water Filter with Flexible Hose Protector (40043)

  • This Accessory hose kit includes all the hoses required for use with a standard fresh water tank..
  • (1) Water fill intake with large hose fitting and cover, (1) Drainage hose spigot, (2) Large hose clamps for water fill, (5) Small hose clamps for the other hoses, and (3) Small hose fittings/barb-to-screw adapters..
  • (1) 60" long clear hose is used for air and drainage, (1) 36" large ribbed hose is for water filling, (1) 18" reinforced hose goes to your water pump.
  • Fits standard tanks with 1.25" water fill port and 3/8" NPT connections..
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed fitting threads.
  • Always wear protective welding helmets and welding gloves when working with welding equipment.
  • NO MORE CRACKS: Other welding torch kits often include low-quality plastic hoses that easily crack and leak to create a disastrous fire hazard with imminent failure to look forward to, but this welding equipment oxygen acetylene torch kit hose is constructed from acetylene rubber for maximum strength and durability.
Check Stock

ARB 4X4 Accessories Digital Tire Inflator Bundle with Tire Inflation Kit for Air Compressors and E-Z Deflator Kit

  • Boost Projects Custom Kit Includes: ARB Digital Tire Inflator & Tire Inflation Kit For Air Compressors & E-Z Deflator Kit.
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
  • Digital Tire Inflator Specs : Large LCD Digital readouts with blue backlight, Battery indicator, Multiple measurements (Scale: 0-200 PSI / 0-14 Bar /....
  • Technical Specifications: 1/4 NPT Female (suites ARB fittings, included) Batteries - x2 AAA (supplied) Battery Life - up to 200 hours Auto switch on....
  • E-Z DEFLATOR KIT Corrosion Resistant Brass/Stainless Deflator Tool Quality Bronze Bourdon Tube Gauge Design Ensures Accuracy is Not Affected by....
Check Stock

Seamax Nylon Air Hose Kit 20PSI SUP Electric Air Pump Version 2 SUP Hose with Multiple Adapters

  • New or replacement air hose kit for Seamax SUP20S or SUP20D electric air pump.
  • Hose Length: 3.3 Feet (1 Meter) Pump connector - Screw in type 100% air tight. Note: Seamax SUP pump comes with 3 different thickness O-rings in the....
  • Version 1: Same standard as the pump package, Boat and SUP new style Halkey Roberts valve adapter Pre-installed. comes with one 5mm thickness O ring..
  • Version 2: With exchange-able fitting end for Multiple valve adaptors, As an upgrade kit for your SUP20S or SUP20D for multi--purpose. Traditional....
  • Version 3: With Leafield C7 valve adapter.
Check Stock

ProMaker Home Brewing Stainless Steel Diffusion Stone Inline oxygenation Aeration Aerator Kit Oxygenation Diffuser for Wort Chiller Kettle Pump Beer Brewing Stone Kit

  • 【High Quality】:Stainless Steel 2 micron diffusion stone and parts make it more durable and keep beer fresh taste.
  • 【Aeration and Oxygenation Kit】:1/2'' MPT Homebrew Inline Aeration/Oxygenation Diffusion Stone with barb fitting,full Kit comes ready to assemble to your equipment.
  • 【 Brewing Tools】Oxygenate wort thoroughly to insure a healthy fermentation and carbonate quickly,connects inline with third fitting connected to your oxygen regulator. The oxygen stone will aerate your wort as they flow through..
  • 【Simple Assembly】:1/4" barb inlet for oxygen regulator or air pump connection,1/2" Hose barbs for beer flow,it can connects inline with any Kettle, Pump, or counterflow/plate wort chiller.
  • 【Package Include】:1* Stainless Diffusion stone + 1*Stainless tee fiting + 2*Hose barb Fitting.
Check Stock

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Check Stock