Categories

Best Air Jet Covering

MSR Expedition Field Service Kit for Camping and Backpacking Stoves, All Whisperlite Stoves

  • Each kit includes: Jet & Cable Tool, O-Rings, Pump Cup oil, Safety Pin, Pump Seal, Air Tube, Fuel Tube and Filter, Shaker Needle, Fuel Tube Bushing, Check Valve Spring, Pump Cup, Check Valve Ball, Check Valve Plug, Check Valve Assembly, Jet Cleaning Wire.
  • WhisperLite Service Kit also Inlcudes: Priming Wick, WhisperLite G Jet, WhisperLite International G Jet, WhisperLite International K Jet, WhisperLite International/Universal UG Jet, WhisperLite International/Universal UK Jet, WhisperLite Universal UC Jet.
Check Stock

TFCFL 100CC 2-Stroke Bicycle Gasoline Engine Motor Kit, Bike Bicycle 44 Tooth Motorized Petrol Gas Motor Engine Kit

  • The 100CC bike engine kit includes all the parts and accessories needed to convert a regular bike into a gasoline-powered motorcycle. Comes with all needed accessories for easy installation..
  • Low fuel consumption, 150 miles per gallon, very energy efficient and economical. Engine requires 8oz 2 Stroke oil per gallon of gas during Break In Period.Suitable for most 26" /28"bikes..
  • Upgraded Tunable High Performance Carburetor. Features: Choke lever on the handlebars, Main jet. (Can be re-jetted), Pilot jet, Copper oil needle, Idle RPM Screw, Idle Air Screw that delivers more fuel with the choke on, instead of restricting air..
  • 50mm bore single piece cylinder/head (increased weight capacity, lower operating temps, easier starting, sustained power output across varied rpm range).
Check Stock

NICHE Carburetor Assembly For Arctic Cat 300 250 0470-448 0470-387 ATV

  • Compatible with: Arctic Cat 2001-2005 300.
  • Compatible with: Arctic Cat 2002-2004 250.
  • Main Jet Spares: #140, #142, #145, #148, #160.
Check Stock

JMCHstore Stage 1 Performance Kit for Coleman CT100U CC100X 98cc, Predator 79cc 3HP Engine, Massimo MB100 79cc Mini Bike, SK100 CK100 Go Kart, 154F 3.0 hp OHV Engine Parts, Red (Red)

  • JMCHstore Red Stage 1 Performance kit for Coleman CT100U CC100X 98cc Mini Bike.
  • For Predator 3 HP (79cc) OHV Horizontal Shaft Gas Engine.
  • For Coleman SK100 CK100-S Go kart , 154F 3.0 hp OHV Engine Parts.
  • Higher Top Speed. Thanks to High Flow Air Filter & Velocity stack, Not only the intake air become smoother but also speed up. W/ massive amount of intake air , you should experience an increased top speed of about 5 -10 mph..
  • Performance Carb W/ Rich main jet. With the added air flow, the more rich main jet is mandatory for optimal engine performance. But now Coleman is equipped EPA Carb w/ non-replaceable main jet. So we provide this old version carb which can replace to rich main jet (Provided ) Direct replacement for stock EPA carb..
Check Stock

Cryorig H5 Universal CR-H5A Mid Tower CPU Heatsink with XT140 Fan for AMD/Intel

  • Proprietary Hive Fin System for airflow optimization, air turbulence reduction, added heat dissipation area, Jet Fin Acceleration System, and structural support..
  • Heatpipe Displacement Optimization allows for better and more evenly spread heat conduction on the fins compared to traditional linear alignment..
  • Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows heated air to leave the tower faster..
  • Heatpipe Convex-Align System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, and improved alignment with your CPU..
  • Includes one XT140 140mm PWM fan with our proprietary HPLN bearing for optimum airflow and noise ratio..
Check Stock

Auxbeam H7 RGB LED Bulb CSP Chips F-B5 Series H7 LED Daytime Running Lights 15000 Lumens 60W Multi-color Mobile APP Bluetooth Control Pack of 2

  • Proprietary Hive Fin System for airflow optimization, air turbulence reduction, added heat dissipation area, Jet Fin Acceleration System, and....
  • Heatpipe Displacement Optimization allows for better and more evenly spread heat conduction on the fins compared to traditional linear alignment..
  • Jet Fin Acceleration System squeezes airflow and increases exhaust air speed. The increase of airflow speed in our Jet Fin Acceleration System allows....
Check Stock

Caltric Front Brake Pads Compatible With Honda Cmx250C Cmx250C2 Cmx250X Rebel 250 1996-2017

  • 0201-318, Carburetor rebuild kit for honda rebel 250 parts.
  • The honda rebel carburetor rebuild kit contains the gasket that will solve the failure of the original gasket, it can replace the repair kit of your damaged parts to prevent oil leakage.
  • This honda rebel carburetor repair rebuild kit is made of high-quality paper copper and iron. It has the characteristics of wear resistance, stable performance, long service life and high reliability..
  • Carburetor rebuild kit direct replacement for a proper fit and easy installation, 2-years service, hassle-free return and money back policy, buy with confidence! any questions about carb repair kit, pls contact us by email, we will reply you within 12 hours..
  • Package includes 1x chamber gasket,1x valve needle,1x needle jet #d294,1x air screw,1x air spring,1x main jet #135,1x slow jet #35,2x o ring,1x washer,1x needle jet.
Check Stock

G830 2.0 Gelcoat Spray Gun

  • 【COMPOSITION STRUCTURE】1 x Spray Gun (gun trigger, air flow control valve, housing, spring hook).
  • 1 x 4mm Spray Nozzle FN5 5/32" (with sealing ring).
  • 2 x 1000ml Plastic Cup (with metal cup cover).
  • 【MAIN PARAMETERS】Air source pressure: 0.3-0.6Mpa, Cup volume: 1L, Measuring Cup: 500ml, Spray Nozzle: (4mm) FN5 5/32", Nozzle outer diameter: 5.0, Nozzle inner diameter: 3.0, Package size: 23cm x 23cm x 17cm (9'' x 9'' x 6''), Shipping weight: 1.4kg/3lbs..
  • 【OPERATION METHOD】According to the viscosity of the gel coat, choose the nozzle with the right diameter. In the nozzle and jet, the gun and the gun body and the lid and the material apply grease to the joints such as the cup. Then cover the cup on the cup filled with the material and press the lid.
  • Force the nozzleinto the air vent in front of the gun until the nozzle shows the air vent.
  • Hold thehandle and hold the gun. The air is ejected from the air jet..
  • 【WIDE APPLICATION】This gun will spray faster than conventional HVLP guns and will clean up in just a few minutes.This gun is used for spraying not only gelcoat, but other materials such as parting films, spray gypsum, tooling gelcoats, sandable primers, granite enhanced gelcoats, adhesives and paints..
Check Stock

Because I Was Inverted Shirt Airplane Jet Fighter Cross Navy T-Shirt

  • Because I Was Inverted Shirt Airplane Jet Fighter Cross Navy Merica perfect navy apparel aviator tee perfect gift for all air craft jet fighter husbands who love to fly a jet airplane funny inverted cross shirt.
  • July 4th Apparel for mens merica shirts perfect fighter jet t shirt.
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock

AES Industries 5pc Sandblaster Tip Kit

  • 3x Nozzles (2x 1/4" ID and 1x 13/64" ID).
Check Stock

Intex 26004E Above Ground Swimming Pool Inlet Air Water Jet Replacement Part Kit; Includes Plunger Valve, Strainer Connector, Strainer Grid, etc.

  • INCLUDED WITH REPLACEMENT PART: The replacement part set includes 1 plunger valve with O-ring (10747), 2 strainer connectors for 1.25-inch fitting (11070), 2 strainer grids (11072), and 1 pool inlet air nozzle set (12354).
  • INCLUDED WITH POOL INLET: Pool inlet air nozzle set includes the jet exterior, O-ring, fittings compatible with other set parts.
  • COMPATIABLE WITH: This pool jet replacement part kit works with pool filter pumps with 1,050 to 1,900 gallons per hour flow rates. You can use these pool jet replacement parts with any Intex above-ground pool.
  • INSTALLATION: Plunger valves install in the side of your Intex pool and connect with your Intex hose fitings.
  • WATER CIRCULATION: Better circulate water through your pool with the help of this Intex 26004E Above Ground Swimming Pool Inlet Air Nozzle Replacement Part Set.
Check Stock

LEGO Education WeDo 2.0 Medium Motor

  • 3in1 toy – Kids can indulge in creative fun with the LEGO Creator 3in1 Supersonic-jet (31126) building set, featuring 3 models in 1: a jet plane, a helicopter and a powerboat.
  • Unlimited playtime – LEGO fans can perform stunts in the air with the jet plane and the helicopter and race on the water with the powerboat.
  • Authentic features – The Supersonic-jet has a cockpit, angled wings and retractable wheels, while the helicopter has rotating blades and the powerboat features 2 superfast engines.
  • A quick build – Kids aged 7 and up can enjoy a quick and easy build with this 215-piece set before playing out stories with the 3 different vehicles.
  • Portable size – The Supersonic-jet measures over 3 in. (8 cm) high, 10.5 in. (27 cm) long and 6 in. (16 cm) wide, to allow kids to play with it at home or take to a friend’s house.
Check Stock

FEL-PRO OS 21625 Oil Pan Gasket Set

  • 1.40 IDF 2 barrel carb carburetor,idle jet 50..
  • 2.Main jet 115,air corrector jet 200,auxiliary venturi 28,venturi 10.5..
  • 3.Package included:1 x 2 barrel carburetor,2 x mounting gaskets..
  • 4.Please compare your carburetor against pictures to ensure this part fits your vehicle.
Check Stock