HaSaoMoi Air Brake Line Fitting, DOT Brass Push in Fitting, Push to Connect Union Fittings Air Brake Union 1/4" Tube OD for Trucks Trailers andIndustrial Use (4 Pack)
- 【EASY TO BE INSTALLED】: Union connect two tube with same OD. All quick connect fittings can be sealed by pushing the tube firmly into the fittings and they are also simple to be removed from the tube..
- 【MAX PRESSURE】: Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer’s recommendations for pressure and temperature mutations).
- 【Quality Guarantee】: If you have any problems with it ,please feel free to contact us and i will try my best to solve your problems as soon as possible until you are satisfied. We are highly confident with our products.you won't regret it if you got it!.
Check Stock
ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool
- QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
- Easier to use and less messy than an inconvenient hand pump.
- EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
- Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
- ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
- WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
- 90 to 120 PSI (6-8 bar) air supply requirement.
- 25-ounce (0.75L) approximate refill container capacity.
- Includes different adapter sizes to accurately fit your application.
- CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.
Check Stock
ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs
- ...umatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
- One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
- Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. But....
Check StockMotive Products - 0104 Power Air Cooled Volkswagen Power Brake Bleeder Kit
- Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
- Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand pump and pressure gauge.
- Works on most Air Cooled VW's including Bugs, Buses, Square Backs and Fast Backs.
- Built-in hand pump (no other pressure source is needed) and precision pressure gauge ensures safe and effective operation..
Check StockUtah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2
- Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
- Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
- Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
- Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.
Check Stock
DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial
- 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
- 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
- 【ALL IN ONE SET】: Unique DOT Air Brake fittings Kit: The air brake fittings contain 34 pcs. 10 PCS: Male Connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 10 PCS: Male 90° Elbow connector 3/8" tube (NPT Pipe Thread: 2 pcs 1/2", 2 pcs 3/8" ), Male Connector 1/2" tube (NPT Pipe Thread: 2 pcs 1/2" , 2 pcs 3/8", 2 pcs 1/4"). 6 PCS: (2 pcs) Tube Tee 1/2" tube, (2 pcs) Tube Tee 3/8" tube, (2 pcs) Tube Tee 1/4" tube. 6 PCS: (2 pcs) Tube Union connector 1/2" tube, (2 pcs) Tube Union connector 3/8" ....
Check Stock
Tanstic 16Pcs Tire Tread Depth Gauge and Brake Lining Thickness Gauge Set, Come with Tire Pressure Gauge and Tire Valve Caps
- ☀[Package Includes] You'll get 1 set of brake lining thickness gauge(8pcs), 3pcs tire tread depth gauge, 2pcs tire pressure gauge and 10pcs tire valve caps..
- ☀[Brake Lining Thickness Gauge] Brake lining thickness gauge is designed for detecting the thickness of brake pads quickly and accurately. And the purpose of color coded design is to match SAE or Metric recommendations for effective and efficient brake pad measurement..
- ☀[Tire Tread Depth Gauge] Tire tread depth gauge can be used to measure tire tread depth accurately, and the color coded design can clearly distinguish the different phase of tire. Suitable for trucks, automobiles, motorcycles or other vehicles. You just need to put the tire tread depth gauge perpendicular to the tire surface, and then press down until needle touches the tire, and finally look straight and read the data horizontally..
- ☀[Tire Pressure Gauge] Tire pressure gauge can be used to measure tire pressure accurately and it is designed with 45 degree angle single head for easy operation. You just need to twist off the tire valve cap, press the mechanical tire gage chuck to the valve, then the scale plate will slip out and you can read the tire pressure from the scale plate..
- ☀[Tire Valve Cap] 10pcs tire valve caps ar....
Check StockBILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle
- A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
- Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
- Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
- Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
- Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check StockMotive Products - 0107 Power Pressure Brake Bleeder for Ford and Asian Cars and Trucks
- Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
- Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand....
- Heavy duty 2 quart pressure tank holds enough fluid to do complete flush and bleed.
- Built-in hand pump (no other pressure source is needed).
- Precision pressure gauge ensures safe and effective operation. Push cap down until it seats. Twist to seal.
Check StockSilver Stainless Steel Brake Caliper/Master Cylinder/Clutch Slave Cylinder Bleed/Banjo Valve Kit for Brembo on Ducati/Aprilia/Moto Guzzi/KTM
- Replaces Manufacturer Part Number:1911113 / 1910790 / 1910301.
- Compatible with: Sportsman 335 1999-2000.
- The mounting hole is 6.5MM, and the center distance of the mounting hole is 38MM..
- The live cylinder diameter of the brake pump is 12.7MM, and the oil pipe screw is 10MM..
- When installing, you must loosen the oil drain screw of the pump under the brake, and continuously press the brake foot brake pump to generate pressure, so that the oil of the brake pump passes through the oil pipe, enters the brake pump, discharges the air, and then tightens the oil drain screw. The brake system does not work without exhausting air.
Check StockMotive Products - 0103 Brake System Power Bleeder for Chrysler/Dodge/Mopar
- Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
- Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand....
- Features custom cap to fit most late model Chrysler and Dodge cars and trucks..
- Also fits some after market reservoirs and master cylinders made by Strange Engineering and Wilwood that use two twist on caps..
- Built-in heavy duty hand pump (no other pressure source is needed) and precision pressure gauge ensures safe and effective operation..
Check Stock
ARES 70923-1-Liter Vacuum Brake Fluid Bleeder - Hanging Hook and Locking Trigger Allows for Hands Free Operation
- ITEM SPECIFICATIONS: This Brake Fluid Bleeder uses a standard workshop air supply and features a working pressure of 71-113 PSI with a maximum pressure of 113 PSI..
- CONVENIENCE: Our 1L Vacuum Brake Fluid Bleeder features a convenient hanging hook and locking trigger that allows for hands free operation..
- TRANSPARENCY: The transparent drain hose allows you to visually inspect the old fluid during the draining process. You can easily flush your entire disc or drum brake system with this brake fluid bleeder!.
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance. If you have any issues with your ARES 1L Vacuum Brake Fluid Bleeder, simply contact customer service for troubleshooting help, parts, replacement, or refund..
- ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..
Check Stock
DHA Handheld Vacuum Pump Brake Bleeder Kit with Pressure Tester Gauge Adapters Set, Manual Pressure Bleed Brake Clutch System Fluid Vacuum Bleeder Bleeding Tool Kit Car Motorcycle Motorbike One Person
- One man brake bleeding kit with check valve could be used on brake and clutch wheel cylinder/caliper, master or slave cylinder. to flush old brake fluid and air, and guide the new fluid to fill the whole brake system. Also they can help to pump out the power steering fluid..
- Automotive abs brake bleeder vacuum pump: Equipped with vacuum gauge, simple operation, convenient readout of pressure Gauge. Pressure range: 0-30inHg, 0-760mmHg. Can test and diagnose a wide variety of brake systems on motorcycle car truck..
- Brake Fluid bleeder set includes: hand pump with gauge, reservoir jar with 2 lids, 4 transparent hoses, 8 adapters and blow molding case..
- Carry Case is made by high quality material, durable and rugged, Contained in a blow mold case for easy transportation and storage..
- We are responsible for every product. If you have any problems with our products or services, please contact us immediately and we will provide you with exceptional responses to your every concern..
Check Stock
