Categories

Best Air Sealing Spray Foam For Attics

HARRIS Wasp, Hornet, Yellow Jacket and Bee Killer Spray, 20 Foot Stream, 16oz

  • Powerful Jet Spray – Aerosol effectively reaches nests up to 20 feet above ground.
  • Kills a Variety of Flying Insects – Effective for wasps, hornets yellow jackets and bees.
  • Stops Wasps Instantly – The foam kills wasps on contact and expands to quickly reach the entire nest.
  • EPA Registered – Registered with the Environmental Protection Agency (No. 1021-1780-3).
  • Indoor/Outdoor Use – In addition to outdoor nests, the spray can also be used indoors such as in attics or anywhere nests are built.
Check Stock

Ordenado Car Wash Foam Gun, Adjustable Hose Wash Sprayer & Ratio Dial/Snow Foam Blaster with Thick Suds -Foam Cannon for Car Home Cleaning and Garden Use with Quick Connector to Any Garden Hose

  • ✅【COMPLETE LOW PRESSURE WASHER GUN】 High quality and no leakage: Committed to making your cleaning easy and fun. The high-quality brass fittings ensure the sealing of the spray gun and the leak-free connection with the hose. The rubber sealing ring inside the ratio dial ensures good sealing and no leakage. The chemically resistant HDPE body ensures long-lasting performance..
  • ✅【BEST CARE FOR CAR】 Ordenado adjustable foam sprayer can provide the best maintenance for your car! It can make the foam dense and rich. Car wash foam helps to gently take dirt and grime away from painted or chromed surfaces, avoiding harmful scratches. There is a 0 to 5 adjustment dial on the foam gun. Just turn the nozzle screw. Even in the smallest cracks and crevices in the car, the thick snow foam can greatly help remove dirt. The professional choice for car lovers!.
  • ✅【FIT FOR MOST HOSE】The car foam gun has a quick coupling to easily connect a standard garden hose, no complicated settings or equipment required. Your garden hose is now a foaming pressure washer that can generate foam immediately. If your hose is American standard thread 3/4', you can use a wrench to unscrew the quick connector, and then you can quickly connect the hose. Nozzle adjustment spra....
Check Stock

Fitosy Car Wash Kit with Foam Gun, Car Wash Foam Gun with Microfiber Towels, Car Wheel Brush & Microfiber Wash Mitts for Car Cleaning, Adjustable Car Wash Sprayer Works with Most Garden Hose

  • ...le twist nozzles (jet stream & fan spray), 1 leaking-proof tape, and other necessary accessories. Amazing Value!.
  • 【Low-Pressure Car Foam Gun】Our car foam gun is made of high-quality brass and chemically resistant ABS material ensures long-lasting performance. The brass fittings and leaking-proof tape ensure good sealing of the spray gun and no leakage. The 6 foams wash gun makes cleaning your car fast, easy, and fun. It easily hooks up to any standard hose with the accessories. No more additional tools or machines are needed..
  • 【Adjustable Foam Concentration】This foam gun combines the soapy water solution with air and running water to spray foam. It can make the foam dense or sparse according to your needs. How dirty is your car? Very dirty or not very dirty? Just turn the 0 to 5 dial to adjust the dilution ratio of the soapy sprayed from the nozzle to use the water and soap most efficiently..
  • 【Interior & Exterior Car Cleaning Kit】After you using the carwash sprayer to clean your favorite car, then you can use the car wheel brush, microfiber wash mitt, car window squeegee, microfiber towels, and detailing brushes to clean your car completely..
  • 【Stop Scratching Your Paint】The car wash foam is one of the professional’s secrets to a scratch....
Check Stock

Harris Wasp, Hornet, Yellow Jacket and Bee Killer Spray, 20 Foot Stream, 16oz (12-Pack)

  • Powerful Jet Spray - Aerosol effectively reaches nests up to 20 feet above ground.
  • Kills a Variety of Flying Insects - Effective for wasps, hornets yellow jackets and bees.
  • Stops Wasps Instantly - The foam kills wasps on contact and expands to quickly reach the entire nest.
  • EPA Registered - Registered with the Environmental Protection Agency (No. 1021-1780-3).
  • Indoor/Outdoor Use - In addition to outdoor nests, the spray can also be used indoors such as in attics or anywhere nests are built.
Check Stock

Huepar HVLP Gravity Feed Air Spray Gun with 1.3mm Stainless Steel Nozzle, 14CFM Professional Paint Gun Automotive with 600ml Aluminum Cup, 1/4 Adaptor and Filter, Optimal Working Pressure 29psi-SG300T

  • ...lting in significant savings in paint consumption to achieve a high-quality finish..
  • PREMIUM SPRAYING EFFECT- The high atomization copper cap retaining ring features a quick release thread, requiring less than a full-turn rotation for fast and easy air cap removal. With a 1.3mm high grade stainless steel nozzle, the sealing is better and more wear-resistant, yielding an increased and more stable fluid flow for more smooth spraying. Particle distribution is optimized symmetrically around the center line of the spray pattern to produce the correct and uniform color every time..
  • PRECISE PAINT APPLICATION-Equipped with three adjustment valves, the sprayer offers precise paint application. Fluid control regulates amount of paint sprayed, pattern control adjusts the fan pattern size, and air adjustment valve provides versatility to adjust air flow. This spray gun delivers 300-325mm spray pattern length, which is wide enough for car, boat and something with large surface. This HVLP gravity feed air spray gun provides even and atomized spray patterns in 29psi air pressure..
  • ERGONOMIC DESIGN- With No Rubber O-ring design, can easily clean with chemical agents and thinners. Anodized aluminum body with high glossy employs ergonomic curved handle featuring an innov....
Check Stock

Lekit Misters for Outside Patio 89FT(27.3M)+34 Brass Mist Nozzles+a Brass Adapter(3/4\) Detachable Outdoor misting Cooling System for Garden, Waterpark, Greenhouse, Backyard

  • The upgraded misting cooling system adopts an advanced sealing and self-locking structure. There are 12 sealing clips inside the tee tube, which enhances the air tightness between the tee tube and the PU hose and effectively solves the problem. The adapter is made of high-strength brass, with a precise internal thread design, and is used with complementary sealing tapes and silicone washers to effectively prevent the substitution of water pressure..
  • The misters for Outside Patio has been pre-assembled and can be used when connected to the water pipe. The installation time does not exceed five minutes. The structural design of the misters for patio is easy to disassemble, and the length and angle you want can be customized according to your actual needs..
  • The spray area of a single nozzle of the misters for cooling outdoor reaches 20-40 inches, which is much larger than other similar products. The water mist produced by the outdoor mister system is uniform and cool, fully absorbs the heat around the outdoor, and effectively cools the air temperature around the spray system at about 20°C..
  • The nozzle of the misting cooling system is made of precision brass, with a precise structure design and good self-sealing performance. The high-quality PU tube has go....
Check Stock

Lekit Misters for Outside Patio 27.5FT(8.4M)+8 Brass Mist Nozzles+a Brass Adapter(3/4\) Detachable Outdoor misting Cooling System for Garden, Waterpark, Greenhouse, Backyard

  • The upgraded misting cooling system adopts an advanced sealing and self-locking structure. There are 12 sealing clips inside the tee tube, which enhances the air tightness between the tee tube and the PU hose and effectively solves the problem. The adapter is made of high-strength brass, with a precise internal thread design, and is used with complementary sealing tapes and silicone washers to effectively prevent the substitution of water pressure..
  • The misters for Outside Patio has been pre-assembled and can be used when connected to the water pipe. The installation time does not exceed five minutes. The structural design of the misters for patio is easy to disassemble, and the length and angle you want can be customized according to your actual needs..
  • The spray area of a single nozzle of the misters for cooling outdoor reaches 20-40 inches, which is much larger than other similar products. The water mist produced by the outdoor mister system is uniform and cool, fully absorbs the heat around the outdoor, and effectively cools the air temperature around the spray system at about 20°C..
  • The nozzle of the misting cooling system is made of precision brass, with a precise structure design and good self-sealing performance. The high-quality PU tube has go....
Check Stock

Dynatex 49292 Low Volatile RTV Silicone Gasket Maker, 0 to 650 Degree F, 300mL Cartridge, Red (Pack of 12)

  • HIGH YIELD! Top plate to attic drywall air sealing is consistently ranked as the #1 air sealing location. Great Stuff Pro Gasket forms a seal between framing lumber and drywall, which can result in up to 1.6 ACH50 reductions. Gasket Foam has a high yield of approximately 250 linear feet or more at ½” wide bead and helps reduce moisture and pollutants..
  • FLEXIBLE SEALANT! Great Stuff Pro Gasket is a flexible, water based, one component foam designed to form an interior gasket between framing lumber and drywall, which improves air sealing performance. Material is applied and allowed to dry to the face of the top plate, bottom plate and around the perimeter of all rough openings before installing drywall. The unique gasket performance allows product use without any changes to construction sequencing..
  • EASY TO USE! Shake the can vigorously for 60 seconds before use. Apply to face of top plate, bottom plate and around rough openings. Gasket Foam air cures in 2 to 24 hours and withstands scrapping and rubbing when drywall is installed. If the can is not finished after the job is done, leave it on the can and close the valve until the next use. Gasket Foam is reusable for up to 90 days when left attached to Great Stuff Pro Gasket Gun with the blue handle..
Check Stock

SocsPark Needn t Clean Foam Gun Pu Expanding Foaming Gun Upgrade Caulking Gun Heavy Duty Spray Foam Gun Metal Body Covered with PTFE Suitable for Caulking Filling Sealing Home and Office Use

  • 【Needn't Buy Cleaner】Upgrade foam gun equipped with a valve. After using, just rotate the valve and push out remaining foam rather than use....
  • 【Convenient to Use】Spring trigger and control knob allow you to control flow accurately and adjust spray distance. Avoid foam waste. Copper tips....
  • 【Ergonomic Design】The foam gun is covered with polytetrafluoroethylene (PTFE) which can keep the gun clean and durable. The handle is made of....
  • 【Widely Application】Suitable for balcony doors and windows, bathtub and air conditioning hole. Ideal for filling, sealing and insulating small....
  • 【Customer Service】We provide 1 year free duty replacement or refund for this foam gun if any quality problem arises..
Check Stock

Misters for Outside Patio 63FT(19.2M)+21 Brass Mist Nozzles+a Brass Adapter(3/4\) Detachable outdoor misting cooling system for Garden, waterpark, Greenhouse, Backyard, Fan, Umbrella, Deck, Canopy

  • The upgraded misting cooling system adopts an advanced sealing and self-locking structure. There are 12 sealing clips inside the tee tube, which enhances the air tightness between the tee tube and the PU hose and effectively solves the problem. The adapter is made of high-strength brass, with a precise internal thread design, and is used with complementary sealing tapes and silicone washers to effectively prevent the substitution of water pressure..
  • The misters for Outside Patio has been pre-assembled and can be used when connected to the water pipe. The installation time does not exceed five minutes. The structural design of the misters for patio is easy to disassemble, and the length and angle you want can be customized according to your actual needs..
  • The spray area of a single nozzle of the misters for cooling outdoor reaches 20-40 inches, which is much larger than other similar products. The water mist produced by the outdoor mister system is uniform and cool, fully absorbs the heat around the outdoor, and effectively cools the air temperature around the spray system at about 20°C..
  • The nozzle of the misting cooling system is made of precision brass, with a precise structure design and good self-sealing performance. The high-quality PU tube has go....
Check Stock

DAFEIKE Spray Foam Gun Expanding Foam Gun Less Cleaner, Updated Teflon Pro Foam Dispensing Gun, Insulating Foam Sealant Sprayer, Pu Foaming Applicator for Caulking and Insulation

  • [REUSABLE AND NOT CLOG] This expanding foam gun doesn't clog after repeated uses as long as you follow the instruction. Both the inside and outside of barrel are treated with poly tetra fluoroethylene (PTFE), resistant to stick..
  • [LESS CLEANER] You don't have to spend money buying detergent and waste time in clean of the manual foam caulking gun every time after each use. This urethane foam gun helps owners to save money and time..
  • [ADVANCED DESIGN] This spray foam gun is the upgraded generation of other brands by adding a valve, which helps to achieve true no-clean. The valve can seal the barrel to enable users to discharge residual sealant completely..
  • [ESSENTIAL IN HOME IMPROVEMENT] This insulating foam sealant gun is widely used in caulking gaps and cracks, sealing window and door, and filling wall and floor (e.g. installation of air conditioners and bathtubs)..
  • [HIGH COMPATIBILITY] This foam caulk gun matches most 20 24 oz foam sealant canister with screw e.g. Great Stuff Pro, not fit for can with tube or straw. A can connects to the top of this foam sprayer through screwing..
Check Stock

Foam Gun, Preciva Professional Foaming Gun Heavy Duty PU Expanding Foam Gun Spray Application Applicator Caulking Gun (Red)

  • Easy to Clean : The foam gun is made of perfluorocarbon engineering plastics and ABS (non-stick material). After use, the gun body is easy for you to clean..
  • Precise Control : The spring-triggered design allows you to precisely control the amount of foam, reducing economic consumption and waste of foam..
  • Excellent Performance : With the high expansion and strong adhesion, spray foam insulation gun is ideal for insulating and sealing small spaces such as your home windows and doors..
  • Rugged and Durable : The precise thread design of the spray foaming gun is easy to operate and durable..
  • Your Choice: If you are looking for a quality expanding foam gun, Preciva is worth buying..
Check Stock

Great Stuff PRO Gaps & Cracks | Gun-Applied Insulating Foam Sealant, 24 oz. – Cream (12 Pack), 341557

  • FILL GAPS & CRACKS. This expanding foam fills, seals and insulates gaps up to 3" inches, creating a long-lasting, water-resistant and fireblock seal around plumbing and electrical, in basements, attics, and more..
  • GUN-APPLIED. Reusable for 30 days when left attached to GREAT STUFF PRO Dispensing Gun (sold seperately). Minimize waste and save on costs, while providing professional quality craftsmanship with more control and less mess..
  • SPRAY ANYWHERe. Tackle a variety of indoor and outdoor projects or jobsites of homes and buildings. Adheres to wood, metal, masonry, glass and most plastics..
  • QUICK-CURE. Stop waiting around and keep the pace of your projects on target. This foam sealant dries tack-free in 10 minutes and cures rigid for trimming in 1 hour. Trim, sand, stain and paint for a truly GREAT finish..
  • FILL MORE GAPS. Get the job done right the first time with this cost-effective bulk case of polyurethane foam crack filler from GREAT STUFF. Includes a 12-count of 24 oz. cans, each with threads to attach to the dispensing gun..
Check Stock