Categories

Best Air Tank Isolation Valve

Aquarium Air Pump Aerator Pump: Upgraded Ultra Silent Air Pump for Fish Tank High Energy Saving Fish Tank Aerator Aquarium Accessories with Check Valve Air Stone 1-15 Gallon Fish Tank Bubbler 1W

  • ...e, which provides abundant bubbles for the 1-15 gallon fish tank, to increase the oxygen content of the fish tank water. The fish tank air pump creates vivid and peculiar atmosphere for your fish tank, which is perfect tool for improving fish health at home..
  • SPECIAL CHECK VALVE DESIGN - The aquarium air bubbler is equipped with unique water flow check valve, that can be adjusted to ensure that the aquarium or fish tank oxygen pump maintains stable air pressure and airflow. Kindly Note: ① please put the air pump about 25cm(10 inches) higher than the water level in order to avoid water backflow.
  • ②If you need to put the air pump below the water level, please ensure to use the check valve to prevent water backflow..
  • ULTRA QUIET & LIGHTWEIGHT - Unlike traditional aquarium air pump, bedeeaerator for fish tank is driven by thin piezoelectric ceramic plate instead of the motor or other mechandism. Its working sound is lower than 35db, which is perfect to be placed in the bedroom, living room or office. The diameter of the fish tank bubbler pump is only 2 inches, which is very lightweight and space-saving..
Check Stock

GODESON 1/8'NPT Tank Valve, Anti-Corrosion Brass Schrader Valve with 1/8'Male NPT,Using with Air Compressor Tanks( Pack of 4)

  • 1.USING WITH AIR COMPRESSOR TANK: GODESON 1/8" NPT Tank Valve Prevents Air from Leaking out while Allowing for Air Inflating in.
  • 2.HEAVY DUTY DESIGN:100% Anti -Corrosion Solid Brass. 1/8" Male National Pipe Thread with Schrader Valve.
  • 3.LIMITED PRESSURE:Max Working Pressure of 200PSI ..
  • 4.INCLUDES: Come with 4 Pieces Tank Valve and 4 Caps.
  • 5.SATISFACTION GUARANTEED：1 Year Warranty, Whatever Problems You Meet with Our Tank Valve, Please Contact Us for the Solution.
Check Stock

Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery with Silver air Pump

  • The brine shrimp incubator contains：1pcs brine shrimp eggs incubator Hatchery，1pcs silver air pump with 1pcs black controller valve,1pcs check valve, 1pcs air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.
  • Our brine shrimp incubator is designed professional for hatching brine shrimp eggs which include silver air pump air stone and aquarium tubing..
  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at the bottom of the incubator to collect brine shrimp. Note that the direction of the inlet and outlet of the check valve must be installed correctly with the pipe, otherwise the air pump will not be able to discharge air..
  • The second way to provide oxygen to the brine shrimp from the bottom hol....
Check Stock

NestBasics Brine Shrimp Hatchery Kits brine Shrimp Eggs Incubator Hatchery brine Shrimp Eggs Incubator Artemia Hatchery kit Machine

  • The brine shrimp hatchery kits product contains：one unit brine shrimp eggs incubator，one unit black USB plug air pump with one unit black controller valve,one unit check valve, one unit air stone,1 meter transparent aquarium tubing, 1 meter black airline ,one unit brine shrimp net colllector,two units automatic brine shrimp feeder for fish,three units Brine shrimp suction tube and six units Brine shrimp storage bottle.
  • Our brine shrimp incubator is designed professional for hatching brine shrimp eggs which comes with the whole set including air pump air stone and aquarium tubing. The main purpose of the small The USB air pump is for continue to hatching brine shrimp when the electricity is off and after the home is powered off, the The USB air pump can be connected to the power bank to continue hatching brine shrimp..
  • There are two ways to install our brine shrimp hatcher machine.You can use the four suction cup of shrimp incubator to stick it to the tank glass inside or you wanna install it out of the tank glass then you can use the tripod to install out of the tank..
  • The first way to provide oxygen to the brine shrimp incubator is to put the bubble stone in the incubator to provide oxygen. When the brine shrimp has hatched, open the trim valve at ....
Check Stock

ALLYLANG 660GPH 40W Aquarium Submersible Water Pump, Apply to Fish Tank / Pond Fountain / Statuary / Hydroponics with 4 Nozzles 5.9ft Power Cord (660GPH)

  • ...【Multi Silent Design Pump】 Suspended motor effectively reduce resonance that there are 4 suspending pillars under the motor box to absorb the vibration. And the integrated air chamber isolate the mechanical noise from motor. The shell of this air pump is made of thickened ABS plastic, realizing secondary noise isolation. There are also 4 rubber pads under the air pump, absorbing vibration and reducing noise. The air pump runs ultra quietly that one can barely hear it even indoor and in bedroom..
  • ★【Adjustable Airflow】 The airflow is designed to be adjustable by rotating the control knob in the rear of the dual-outlet air pump. You can adjust the volume of air based on the oxygen supply demand of your fish tank. The single-outlet model is equipped with a flow control valve for flow rate adjustment..
  • ★【High Efficiency】 Orlushy air pump is compact in size but powerful in performance, which can double the oxygenation efficiency. The airflow is sufficient enough for dividing the air into 4 outlets from two and two outlets from one with air diverter valve, applicable to bedroom bubble wall. The two outlets can also be merged in one to maximize the airflow..
Check Stock

MeeF Incubator Automatic 30 Eggs Incubator Intelligent Constant Temperature， can Hatch 30 Duck Eggs, Pigeon Eggs, Quail Eggs and 15 Goose Eggs，Fahrenheit Display

  • 【Add water from outside】There is no need to open the incubator when adding water, and the machine comes with a special water filling bottle, which can be directly filled with water from the outside. Avoid the loss of eggs due to frequent opening and adding of water..
  • 【Upgrade the isolation tank】Most incubators do not have a tank isolation board, causing the chicks to drown after hatching. The newly upgraded Meef 30Pro is equipped with a water tank isolation fence, which can effectively prevent the chickens from drowning in the water tank. At the same time, it comes with two automatic chicken drinking bowls to solve the problem of drinking water after the chickens hatch..
Check Stock

bnafes Aquarium Air Valve 6 Way Inline Manifold Air Flow Pump Tubing Splitter Lever Control Valve 2-Pack

  • Inlet Diameter: 0.16Inch/4 mm.Outlet Diameter: 0.16Inch/4 mm..
  • Air pump aquarium control air water flow lever valve is the best choice for fish tank and aquaculture applications..
Check Stock

TCP Global 10 Gallon (38 Liters) Pressure Pot Tank for Resin Casting - Heavy Duty Powder Coated Pot with Air Tight Clamp On Lid, Caster Wheels, Regulator, Gauge - Use for Curing Resin in Casting Molds

  • Professional heavy-duty 10 gallons (38 liters) capacity pressure pot tank for resin casting. The tank has a maximum operating pressure of 50 PSI. Holds the air pressure constant at your regulated air pressure setting during the whole casting mold resin curing process..
  • The pressure pot tank is constructed with heavy gauge steel and has a durable easy to clean powder coating. It has a 14.5″ inside diameter and is 17″ deep, so it has a large enough capacity to accommodate almost any casting project. Includes 4 removable caster wheels..
  • Tank has a clamp-on lid with an airtight sealing gasket. The lid has an air pressure regulator with air inlet shut off ball valve, air pressure gauge from 0 to 100 psi, safety air relief valve and an air release outlet cock valve..
  • The ideal pressure pot tank for inserting resin casting molds and holding them under pressure so that you can make high quality virtually bubbleless resin castings..
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • Drain water thoroughly: our ball type drain valve can replace air compressor drain cocks, suitable for compressed air storage tanks to drain water or harmful liquids.
  • It can drain water or other harmful liquids thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
  • 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
  • Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
  • Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
  • Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
  • Better work performance: brass mini ball valve is equipped with lever handle....
Check Stock

Breezliy 2PCS 1/4' NPT Tank Valve Anti-Corrosion Brass Schrader Valve with Standard Valve Core with 1/4'' NPT Male ,Using with Air Compressor Tanks with Sealing Caps

  • ★For use with air compressor tanks to fill vessels with air.Tank valve prevents air from leaking out while allowing for air to pass through for inflation..
  • ★Max working pressure of 150PSI.Temperatures range from -65 to 250 F..
  • ★Material:100% Anti -Corrosion Solid Brass. 1/4" Male National Pipe Thread with Schrader Valve..
  • ★Comes with a cap, threaded tire core valve and brass body..
  • ★Including: 2PCS 1/4" NPT Tank Valve with 4 caps and 1 teflon tape .And Provide 1 year quality warranty..
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...kes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our mini scuba tank have the CE certified in EU and DOT certified in US, it can be used by uncertified diver, but some diving places may not permit uncertifed people diving, please know your local policy before buy it. This tank can be used for normal diving no more than 10m(about 32 ft), and the water temperature should be above 10 ℃（50℉). Besides, scuba tank can be used as backup air, in this situation, it can be used in 30m(100 ft) underwater..
  • ✅【OUR SERVICES】:Select this package, you will get: 1L tank, regulator, second stage valve, portable bag. If you have any problems with our products, please feel free to contact us. Also, you can fi....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...d, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED :Our mini scuba tank have the CE certified in EU and DOT certified in US, it can be used by uncertified diver, but some diving places may not permit uncertifed people diving, please know your local policy before buy it. This tank can be used for normal diving no more than 10m(about 32 ft), and the water temperature should be above 10 50). Besides, scuba tank can be used as backup air, in this situation, it can be used in 30m(100 ft) underwater..
  • OUR SERVICES:Select this package, you will get: 1L tank, regulator, second stage valve, portable bag, portable case. If you have any problems with our products, please feel free to contact us. Also, you can find most of p....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...s about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. When normal used, all the parts could work for at least 2 years, and we also provide some free accessories in the accessories bag..
  • ✅【PROFESSIONAL SCUBA TANK WITH DOT CERTIFIED 】:Our mini scuba tank have the CE certified in EU and DOT certified in US, it can be used by uncertified diver, but some diving places may not permit uncertifed people diving, please know your local policy before buy it. This tank can be used for normal diving no more than 10m(about 32 ft), and the water temperature should be above 10 ℃（50℉). Besides, scuba tank can be used as backup air, in this situation, it can be used in 30m(100 ft) underwater..
  • ✅【OUR SERVICES】:Select this package, you will get: 1L tank, regulator, second stage valve, portable bag, portable case, scuba adapter, diving glasses, high pressure hand pump. If you have any probl....
Check Stock