Categories

Best Air Tank Regulator

COLIBROX Professional Portable Oxygen Acetylene Oxy Welding Cutting Weld Torch Tank Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc.
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming.
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200).
  • Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly.
Check Stock

Porter Cable Air Compressor Replacement 3-Port Regulator # CAC-4296-1

  • 1/4″ Air Regulator Replaces: D27253 Fit Many Dewalt, B&D Craftsman & Porter Cable..
  • Full Flow Gage Ports, This regulator is regulator pressure ONLY, If you need Tank/Regulator pressure, please search on Amazon for following ASIN: B082MTPBZS.
Check Stock

2-Stage Automatic Changeover LP Propane Gas Regulator with Two 18" RV Pigtail Propane Hoses with Gauge, Stainless Braided QCC1 1/4" Inverted Male Flare, Propane LP Gas Regulator for RV Camper Trailer

  • ❤【GardenNow Upgraded 2-Stage Auto Changeover LP Propane Gas Regulator】This Rv Propane Regulator allow you to hook up 2 Propane tanks and automatically switches from primary to reserve tank when primary is empty and vice versa. The indicator will changes color to let you know when a tank has been depleted and needs to be refilled also remind you switching to the backup tank. For RVs with dual propane tanks allow removal of empty cylinder for non-stop refill without interrupting propane supply..
  • ❤【2 Pack 18 inch Stainless Braided QCC1 1/4" Inverted Male Flare RV Pigtail Propane Hose with Gauge】1/4" inverted male flare stainless steel braided RV propane pigtail hose to 1/4" inverted male flare. (Not the 1/4" Male NPT. Please check your connector before you order it.) This propane tank hose come with tank gauge level indicator with 3 different colors Dial Gauge can glows in dark, allows you to read and monitor the gas level without necessarily removing the tank, and can detect the leak..
  • ❤【Specification & Material】RV Propane Regulator: Inlets are 1/4" SAE Inverted Flare, Outlet is 3/8" Female NPT, Primary Cylinder Capa....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices.
  • ✅【HIGH QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve an....
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...y of 1L, and can be used for 340 times underwater breath when full inflated, it's about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • PERFECT COMPATIBILITY : The scuba tank's inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • HIGH QUALITY MINI SCUBA TANK: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valve and breath tube. Wh....
Check Stock

Metabo HPT Air Compressor, Wheelbarrow, Honda GX 160 Engine, 8-Gallon, Gas Powered, Portable, Twin Tank, Cast Iron, Oil Lubricated Pump, Solid Flat-free Rubber Tire (EC2610E)

  • ENGINE: Honda GX 160 engine delivers reliable and rugged performance.
  • MULTIPLE NAILERS: 9.5 CFM delivered at 90 PSI operates multiple nailers simultaneously.
  • PUMP: Cast iron, low RPM, oil lubricated pump for improved performance and durability.
  • AIR COOLED: Air-cooled after cooler reduces moisture inside air tanks.
  • REGULATOR: Locking regulator ensures efficient air pressure delivery.
  • PNEUMATIC THROTTLE: Offers more reliability than the standard throttle cable.
  • DISCHARGE HOSE: Stainless steel braided discharge hose resists corrosion and remains flexible.
  • GAUGES: Industrial air pressure gauges easy to read and steel-encased for added protection.
  • TANK: Ball valve tank drains quickly and easily drains air from tanks.
Check Stock

SMACO Scuba Tank 1L Mini Scuba Tank S400 Scuba Diving Tank Diving Equipment

  • ...of 1L, and can be used for 340 times underwater breath when full inflated, it’s about 15-20 minutes(the diving time determined by the breathing rate). This mini scuba tank only weight for 5.07 lb, with the equipped portable bag, you can easily carry it and free your hands to do more underwater. You can also split regulator and tank body and put them in the portable case, then you can take them on plane to diving in any place..
  • ✅【PERFECT COMPATIBILITY】 : The scuba tank’s inflation interface is 8mm, and the work pressure is 3000Psi/200Bar/20Mpa. It has three inflate ways: scuba adapter, electric pump and SMACO high pressure hand pump. When inflate with electric pump, please equipped with oil-water separator.
  • when use other hand pumps, please make sure it can reach up to 3000Psi. NOTE: using the hand pump to reach up to 3000Psi is tired, it takes about 30-45 minutes, we suggest to use it as a backup inflation devices..
  • ✅【HIGHT QUALITY MINI SCUBA TANK】: The tank body was made of aviation aluminum, can better resists to seawater corrosion and stands up well to damage. The regulator include inflation interface(8mm), pressure gauge, air switch, explosion valve, constant pressure valve. and the second-stage valve include mouthpiece, relief valv....
Check Stock

Gas One 2106 3 ft Regulator Fire Pit Grill Heater Propane Hose, 3 feet

  • ✓ A TOP QUALITY PROPANE REGULATOR AND HOSE - maxing out at 80, 000 BTU, this 3Ft low pressure propane regulator is fiber reinforced to ensure quality performance. The hose is the perfect fit for a wide variety of grills, fire pit tables, and other propane appliances.
  • ✓ LONG LASTING AND DURABLE - Gas One’s 2106 Low Pressure Propane Regulator provides an air-tight connection for your propane appliances. Made with high quality rubber and brass connections, the 2106 ensures a stable connection and a leak-free experience.
  • ✓ MEASUREMENTS- The 2106 Propane Hose measures at 3ft long (91. 4cm) and is made to have a secure fitting with type-1 (QCC-1) propane tank connections. The hose has an inside ⅜-inch flare fitting and has an outside diameter of ⅝ inches.
  • ✓ READY FOR US - The low pressure hose is ready to use right out of the box and requires no additional tools to set up. Simply connect the regulator to the tank and appliance when ready to use.
Check Stock

Professional Portable Oxygen Acetylene Oxy Welding Cutting Torch Kit W/Gas Tank Torch Cutting and Welding Portable Kit

  • General Maintenance Work - Extremely Popular General Maintenance Work, Automotive Repair, Metal Sculpture, Air Conditioning, Refrigeration etc..
  • Ideal Use - For iron or steel welding, braze-welding, plus brazing, cutting, bending & forming..
  • Waterproof Storage Compartment - Carrier is made of tough, lightweight polypropylene.
  • Regulator Type - Rear entry regulators for better balance on the small cylinders Oxygen Regulator Type: (CGA540) Acetylene regulator Type: (CGA200)..
  • Complete Set - Compatible gas-welding accessory kit includes a 20cu. ft oxygen tank and 10cu. ft acetylene tank with regulators, along with full brass torch assembly..
Check Stock

Kegco YH-76S-3 Commercial Grade Three Gauge Secondary Regulator

  • Kegco YH-76S-3 Commercial Grade Triple Gauge Secondary Regulator consistently delivers peak performance and is capable of handling the harsh conditions of commercial environments.
  • Secondary regulators are used when attempting to dispense two or more kegs off of the same CO2 tank at different pressures.
  • This regulator has its own shut off valves and T-style adjustment valves that make it easy to adjust the keg pressure when the regulator is cold.
  • The triple gauge regulator comes equipped with three pressure release valves and three gauges that indicate how much CO2 pressure is inside of the kegs.
  • In order to use this secondary regulator, you will still need a primary regulator onto which one output can connect to the secondary with a piece of air line.
Check Stock

Air Venturi 3,000-PSI Air Tank, High-Pressure Tank, Aluminum, 1,100-PSI Output

  • PCP AIR TANK: For additional shot consistency and charging convenience, you'll love converting certain CO2 guns to high-pressure air. Choose this lightweight tank with its integrated regulator and enjoy thousands of shots from the 3,000 psi charge..
  • SAFETY FIRST: The Air Venturi 13-ounce aluminum high-pressure air tank is the perfect pairing for many air guns. Made with D.O.T. and TC approved aluminum, it has a low-pressure burst disc restrictor, a bleed hole, and safety groove..
  • REFILLABLE COMPRESSED AIR: This high-pressure tank must be filled through the male quick-disconnect on the neck. The mini fill valve is hardened and plated. Many fill sites may be able to refill your compressed air tank, but they may need an adapter..
  • ACCESSORY FOR PCP AIRGUNS: When you want to take your shooting game to the next level, this air gun tank is a must have. Weighing only 0.5 pounds, this lightweight tank won't affect the weight of your airsoft gun, but it will increase its power..
  • AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience..
Check Stock

TMCRAFT Keg CO2 Regulator, Dual Gauge CGA-320 Pressure Regulator with 0-60 PSI Working Pressure & 0-3000 PSI Tank Pressure, Kegerator Regulator with Safety Pressure Relief Valve

  • Dual Gauge & Stable Pressure: TMCRAFT upgrade regulator is equipped with dual pressure gauges to clearly display both the working pressure (0-60psi) and tank pressure (0-3000psi), easy to adjust and stabilize the pressure by rotating the adjustment knob..
  • High Quality: TMCRAFT CO2 upgraded beer regulator is constructed of forged premium brass for strong durability and high reliability. Dual gauges can accurately measure working pressure in the system and CO2 tank pressure, each gauge is equipped with a rubber protector to prevent breakage..
  • Sealing & Anti-Backflow: TMCRAFT CO2 keg regulator features a high-quality crafted pressure release valve, a durable thick washer ensures a tight seal at the inlet to avoid liquid backflow and air entering, and the hose clamp is provided to prevent any kind of gas leakage. .
  • Wide Applications: TMCRAFT CO2 regulator with CGA-320 inlets can be easily connected to a CO2 tank. Connect gas line ( ID 5/16”) and keg coupler to fit most American kegs. It is convenient to use in commercial environments like beer bars, restaurants, breweries, etc..
  • 100% Lifelong Warranty: Message us 24/7 via Amazon for full support and service if you are not fully satisfied with our regulator or it does not perform to your expectations. we w....
Check Stock

GasOne 2109-RED 4 ft High Pressure 0-20 PSI Adjustable Regulator with Red QCC-1 Type Hose-Works with Newer U.S Propane Tanks

  • USER FRIENDLY AND TOP QUALITY CONNECTION - this high-pressure regulator and hose is adjustable from 0-20 psi with its red knob and has a top notch....
  • LONG LASTING AND DURABLE - Gas One’s 2109-RED High-Pressure Regulator provides an air-tight connection for your propane appliances. Made with high....
  • READY FOR USE - The high-pressure hose and regulator is ready to use right out of the box. Simply connect the regulator to the tank and appliance when....
  • MEASUREMENTS - The 2109-RED measures at 4ft long and is made to have a secure fitting with type-1 (QCC-1) propane tank connections. The hose has an....
  • NOTE - Tools are required for secure leak free connection to your propane appliance, Output of adjustable 0 to 20 PSI.
Check Stock