Categories

Best Air Tool Air Sander

5 inch Pneumatic Orbital Sander Air Sander Palm Da Sander Hook and Loop Air Powered and Swirl Free by ZHONG AN

  • 【PROFESSIONAL】----- 5" Air Random Orbital Sander---high strength,durability, efficiency and easy to control..
  • 【 PERFECT PERFORMANCE】----- Built-in regulator for speed control of 12000 RPM to make your projects flat and smooth..
  • 【 VARIED APPLICATIONS】----- This dual action sander is ideal for auto body, furniture,wood, metal products, widely used for sanding, grinding, polishing and waxing and cutting, etc..
  • 【 PNEUMATIC SANDER】-----Air powered sander with hoop and loop pad which is easy to change sanding discs..
  • 【 PRODUCT DATA】----- Sanding pad: 5".
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • REPLACe A/C CLUTCH ASSEMBLY: Use the ABN Air Compressor Clutch Rebuild Removal Tool Kit – AC Clutch Puller for Car Auto Air Conditioning to remove, install, or rebuild clutches found on FS6, C171, 6P, and 148 compressors.
  • GM R4 and A6, HR-6, DA-6 and V A/C compressors.
  • sander compressors SD 505, 507, 575, 708, and 709.
  • Wide application of vehicles including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (2....
Check Stock

SI FANG 2'' 3'' Mini Orbital Air Sander High Speed Random Orbital Air Sander Detail Sander for Auto Body Work,Latest Stable Version

  • ▲ High quality professional Air Random Orbital Sander with 2 inch and 3 inch sanding pad ，it is a Good Mini Detail Sander Polisher For Auto Body..
  • ▲ High stability, low vibration rate and low energy consumption, 15000 Rpm. And it is easy to operate mini air sander..
  • ▲ The Hand Air Sander Has Small Size, Light Weight, Low Vibration, Easy To Take Grip Operation，different Type Of Sandpaper Can Be Installed With Different Type Of Disc , Which Is Powerful And Suitable For Polishing Small Areas And Refinishing Paint..
  • ▲ High efficiency, High technology. SI FANG air polisher adopts eccentric double-rotation polishing method to make the polishing effect more uniform and smooth..
  • ▲ Ideal for spot sanding focus areas, removing solder joints and rust spots on metal products, deburring furniture and woodwork, mold manufacturing, polishing automotive and detailing work,etc..
Check Stock

Wish You Were Here

  • ⭐UNIVERSAL FIT:Switch 489105-00 On-Off Toggle Switch For Compatible with Delta Table Saw.
  • ⭐REPLACES NUMBE:Compatible with 31-695 Type 2 Sander 31-780 Type 1 Sander SA180 Type 1 Belt/Disc Sander 22-540 Type 1 12 inch Planer 22-560 Type 1 Planer 22-565 Type 1 Planer 28-150 Type 2 Band Saw 23-675 Type 1 Grinder / Finisher 14-650 Type 1 Mortiser LA200 Type 1 Lathe 31-325 Type 1 Grinder/Sander TS300 Type 2 Bench Table Saw TS350 Type 1 Bench Table Saw SH100 Type 1 Bench Shaper AP300 Type 2 Air Collector Management SA180 Type 2 Stationary Sander 34-670 Type 2 10 Inch Table Saw JT360 6".
  • ⭐WORKS FOR BRANDS: Compatible with GR450 Type 1 8" 1 6"Tool-less Quick Change Variable-Speed Grinder TP305 12-1/2" Portable Planer DP300L 12" Crosshair Laser Drill Press 17-900 Type 2 16-1/2" Drill Press 36-600 Type 2 Table Saw 50-075 Type 1 Single Stage Collector 50-665 Type 1 1.5Hp 2 Stg Collector 14-070 Type 1 14" Floor Drill Press DP200 Type 1 10" Drill Press DP400 Type 1 Drill Press GR250 Type 1 6" Bench Grinder with Lamp 46-250 Type 2 Midi-Lathe 36-610 Type 2 Table Saw 36-380 Type 1 Xl-10.
  • ⭐Specifications: Voltage: 125/250V Amperage: 20/12A Terminals: Two,On-Off Toggle Switch replaces Compatible with Delta 489105-00, 1343758 (Optional Lock).On-Off Toggle Switch re....
Check Stock

ATE Pro USA - Air Tool Combo Set Air Twin Ratchet Wrench 3/8 Pro Air Hammer w/Chisel 1/4 Mini Extended Air Die Grinder 1 Shaft 2 Air Angle Sander w/ Velcro Backing Pad Pneumatic Tool Kit

  • ATE Pro. USA - Air Tool Combo Set Includes:.
  • (1) - Air Twin Ratchet Wrench 3/8" Pro: Stubby yoke, teaser trigger, 360 degree turn-able exhaust deflector | Compact design with rear 4-speed....
  • (1) - 150MM Air Hammer w/Chisel: Professional tool for commercial or occasional use | Ideal for handling a large range of cutting requirements |....
  • (1) - 1/4" (6MM) Mini Extended Air Die Grinder (1" Shaft): Lever lock throttle for safety | Built-in Regulator | Lightweight aluminum housing with....
  • (1) - 2" Air Angle Sander w/ Velcro Backing Pad: Ergonomic Design | Safety trigger prevents accidental starts | Adjustable 4-speed rear regulator and....
Check Stock

Dynabrade X51 Dynorbital Extreme, Power-Disc-Sanders, Silver

  • EXTREME SANDING: 5" (127 mm) diameter random non-vacuum orbital sander has a 3/16" (5 mm) diameter orbit. Self-generated or central vacuum conversion kits available..
  • EXTREME COMFORT: Tool is ergonomic with integrated comfort platform and a soft grip co-molded to composite base. Recessed throttle lever eliminates pressure points on operator's palm..
  • EXTREME POWER: Air-powered motor design is at 0.3 horsepower, up to 12,000 RPM, weighing 1.8 lbs. Consistent speed at 92% of rated tool speed. The new rotor design enhances power with less friction..
  • EXTREME PERFORMANCE: Sander contains weight-mated sanding pad with vinyl pad face. The sanding pad is made from the highest quality materials for extreme durability and longevity..
  • THE DYNABRADE DIFFERENCE: A reputation for excellence in the design and manufacturing of pneumatic abrasive power tools. We listen. We observe. We OPTIMIZE..
Check Stock

Dynabrade X51H Dynorbital Extreme, Power-Disc-Sanders

  • EXTREME SANDING: 5" (127 mm) diameter random non-vacuum orbital sander has a 3/16" (5 mm) diameter orbit. Self-generated or central vacuum conversion kits available..
  • EXTREME COMFORT: Tool is ergonomic with integrated comfort platform and a soft grip co-molded to composite base. Recessed throttle lever eliminates pressure points on operator's palm..
  • EXTREME POWER: Air-powered motor design is at 0.3 horsepower, up to 12,000 RPM, weighing 1.8 lbs. Consistent speed at 92% of rated tool speed. The new rotor design enhances power with less friction..
  • EXTREME PERFORMANCE: Sander contains weight-mated sanding pad with hook-face pad face. The sanding pad is made from the highest quality materials for extreme durability and longevity..
  • THE DYNABRADE DIFFERENCE: A reputation for excellence in the design and manufacturing of pneumatic abrasive power tools. We listen. We observe. We OPTIMIZE..
Check Stock

6 Air Random Orbital Sander Air sander Pneumatic Sander with Hose and Bag for Car 6 Inches Polishing Grinding Sanding for Car Metal,Wood Wax Metal Work.

  • PROFESSIONAL PNEUMATIC SANDER: New version, 6" Air Random Orbital Sander is easy to handle in palm.
  • Comes with 7 pieces of 240 # sandpaper, wear....
  • STABLE PERFORMANCE:Integrated speed control, low vibrations, no eddy current, No-load speed: 10000rpm, Air consumption: 0.35m³. Perfectly balanced....
  • DUST SUCTION SYSTEM: No more heavy dust with this handy air sander vacuum. Exhaust emissions to make siphon effects, and self-absorb the bottom debris....
  • APPLICATIONS: This dual action sander is ideal for the car body, furniture, metal products and other components, widely used for rough grinding,....
  • ERGONOMIC DESIGN: Size: 115 * 175 * 150mm, Weight: about 1.2 kg. Easy to grip, low vibration, less hand fatigue and an ergonomic counterweight design.....
Check Stock

JET JAT-752, 1/2\ x 24\ Pneumatic Belt Sander (505752)

  • ★ 【Material】:Made of high quality stainless steel. It has strong rust resistance, corrosion resistance and pressure resistance, exquisite appearance and long service life..
  • ★ 【Application】: It can be used for metal products, steel, copper aluminum materials, plastics, stainless steel mirror processing, leather fabrics, fiber glass, synthetic materials, rubber, glass, wood, stone and welding point burr grinding, cutting and polishing. It has a good effect on removing weld bead at corner edge.
  • ★ 【Advantage】: High stability, low vibration rate, low energy consumption, compact shape, legerity and portable.The handle is ergonomically designed, comfortable to hold and not easy to slide when using.Metal trigger switch design, no fatigue for long time use.
  • knurled handle, non-slip and non-slip, safer to use..
  • Grinding method: front and rear grinding..
  • ★ 【Package Include】: one 1/4 inch air belt sander and 12Pcs Air Belt Sander Belts(3/8"x13") ( #40，#60，80#，120#,3 for each).
Check Stock

Ingersoll Rand 300G Edge Series 6" Air Random Orbit Sander with 360 Degree Swivel Vacuum Adapter, Powerful 1/5 HP Motor, Lightweight, Low Vibration, Diffused Rear Exhaust, Black

  • VACUUM READY: IR’s EDGE Series 300G 6" Random Orbital Air Sander is designed to connect to central and portable vacuum systems.
  • 360-degree swivel vacuum adapter comes included to provides a greater range of movement without tangled hoses and cords.
  • LIGHTWEIGHT YET STURDY: Sander features a low vibration, composite design that is exceptionally rugged and lightweight.
  • It measures 7.5 inches long and weighs only 1.9 pounds.
  • DIFFUSED REAR EXHAUST: Tool extracts dust and particles through its 6-inch pad, keeping foreign matter away from the motor and away from your work, helping deliver a high-quality, swirl-free finish.
  • APPLICATIONS: This pneumatic sander is well-suited for woodworking and auto body projects, as it prepares metal and wood surfaces for painting and finishing.
  • DEPENDABLE RELIABILITY: Durable design ensures this tool will work like you expect each time you pull the trigger.
  • Every component, mechanism, and function has undergone rigorous testing to ensure long-lasting performance.
Check Stock

Autolcok 2022 Upgrade 6 Inches Air Random Orbital Sander, Pneumatic Palm Car Sanders For Wood Polisher Metal,And Auto Body Work, Da Sanders, Dual-action Sander

  • Ideal gift for your family & professional work.
  • [PROFESSIONAL PNEUMATIC SANDER] --- 2022 New version Air Random Orbital Sander is easy to handle in the palm. you can start your grinding work confidently no matter what..
  • [SMOOTH OPERATION] --- Autolock’s Dual Action Pneumatic Sander (DA Sander), Lightweight, low height, Low Vibration, the Precision balanced motor operates smoothly for greater comfort and control..
  • [ADJUSTABLE ADN HIGH SPEED] --- The built-in regulator of the sanding machine is for speed control and free speed can reach 12,000 RPM to improve work efficiency. It is easy to handle and can be operated with one hand..
Check Stock

Autolcok 2022 Upgrade 5 Inches Air Random Orbital Sander, Pneumatic Palm Car Sanders For Wood Polisher Metal,And Auto Body Work, Da Sanders, Dual-action Sander

  • Ideal gift for your family & professional work.
  • [PROFESSIONAL PNEUMATIC SANDER] --- 2022 New version Air Random Orbital Sander is easy to handle in the palm. you can start your grinding work confidently no matter what..
  • [SMOOTH OPERATION] --- Autolock’s Dual Action Pneumatic Sander (DA Sander), Lightweight, low height, Low Vibration, the Precision balanced motor operates smoothly for greater comfort and control..
  • [ADJUSTABLE ADN HIGH SPEED] --- The built-in regulator of the sanding machine is for speed control and free speed can reach 12,000 RPM to improve work efficiency. It is easy to handle and can be operated with one hand..
Check Stock

NEIKO 30069A Heavy Duty 7' Pneumatic Air Angle Polisher and Buffer, 1,500-2,600 RPM, 90 PSI, Variable Speed

  • [APPLICATION]: This air tool is light and easy-to-handle and fits standard ¼” air hoses at 90 PSI for a perfect polishing/buffering finish on different materials on cars/vehicles and many more applications in conjunction with an orbital sander, surface grinder, or other sanding/grinding tool..
  • [LIGHTWEIGHT]: Weighing in at only 4 (pounds) lbs. and powerful, this air buffer’s free speed is rated between 1,500-2,600 RPM for buffing and polishing paint, metal and plastic surfaces with power and ease..
  • [LOW NOISE]: The ball bearing construction provides vibration free performance with a muffler exhaust that allows quiet operation at home or in the garage..
  • [FEATURES]: The buffing and polishing speed can be controlled by feathering the trigger and side handle mounts easily for left- and right-hand operation for all of you home or car improvement projects..
  • [AUTOMOTIVE]: Ideal for restoring dull car paint, removing rust, or fine scratches to reveal a beautiful gloss finish on your vehicle’s exterior..
Check Stock