Dixon PL500 Aluminum Air Fitting, In-Line Lubricator, 1\ NPT, 100 SCFM, 250PSI, 16 ozs Oil Capacity
- Transparent sight disc allows visual inspection of oil level.
- Installation is recommended within 25 feet of the tool to be lubricated.
- Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor.
- Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms.
- Oil flow regulated by screwdriver screw adjustment.
Check StockEXELAIR by Milton FRL Air Lubricator - 1/2\ NPT - Metal Bowl (EX45L-04M)
- FRL Air Lubricators: Extend air tool life and provide a continuous supply of oil..
- Durable cast aluminum body to resist corrosion. Rotating flow dial to adjust oil volume. Easy-access oil fill cap..
- Metal Bowl w/Sight Glass: Indicates oil level. Bowl Capacity: 4.56 OZ..
- 1/2" inch national pipe threads on both inlet/outlet. Thumb Latch releases bowl with 1/8 turn..
- Max Air Flow: 175 CFM. Max operating pressure: 145 PSI. Temperature range between 25°F and 140°F or -5°C and 60°C..
Check StockDixon PL400 Aluminum Air Fitting, In-Line Lubricator, 3/4\ NPT, 70 SCFM, 200 PSI, 3.7 ozs Oil Capacity
- Transparent sight disc allows visual inspection of oil level.
- Installation is recommended within 25 feet of the tool to be lubricated.
- Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor.
- Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms.
- Oil flow regulated by screwdriver screw adjustment.
Check StockDixon PL300 Aluminum Air Fitting, In-Line Lubricator, 1/2\ NPT, 30 SCFM, 500PSI, 1.4 ozs Oil Capacity
- Transparent sight disc allows visual inspection of oil level.
- Installation is recommended within 25 feet of the tool to be lubricated.
- Each time an air tool is operated, a fine mist of oil is injected into it along with the air from the compressor.
- Designed to protect portable or stationary air tools by efficiently oiling the tool mechanisms.
- Oil flow regulated by screwdriver screw adjustment.
Check StockBILT HARD Ultra Quiet Air Compressor, 8 Gallon, Oil-Free, Portable Electric Shop Compressor, CSA Certified
- OIL FREE: It features an oil-free and maintenance-free pump system that provides better tool performance and longer tool run times..
- ULTRA QUIET: The motor operates at only 1680 RPM creating less noise and less wear. Ultra quiet operation is up to 80% quieter than similar workshop/auto compressors..
- PRODUCT PERFORMANCE: With 8 gallon tank, 1 HP motor, 120V/60Hz and maximum 120 PSI, the quiet air compressor provides adequate stored air power and dependable performance..
- NOTICE: No hose included. You will need a ¼” Universal / Industrial Male Quick Connector to attach your hose to the air compressor..
- SAFETY & PORTABLE: Safety valve increases security, handle and 2 big rubber wheels for easy moving. The air compressor can support many kinds of pneumatic and woodworking tools. like inflation, finishing nailer and other industrial fields..
Check Stock
NEIKO 30252A Water and Oil Separator for Air Line | 1/4' NPT Inlet and Outlet | 90 PSI | Air Compressor and Air Tool Accessory | Protect Lifespan of Pneumatic Tools | Water Moisture Filter Dryer
- WATER SEPARATOR: An essential air tool accessory for mechanics and craftsmen that stops moisture, water, oil, and particles from entering air spray guns and other air compressor tools to keep your equipment in top performing shape..
- OIL SEPARATOR: This air filter unit separates the oil from the air as it goes through your air hose the oil needs to stay inside the compressor to keep it lubricated while the compressed air needs to exit the compressor free of oil to ensure maximum air output to your air tools and increase reliability and lifespan..
- MAXIMIZE PERFORMANCE: The inline oil water separator traps water vapor and dust to maximize the performance of air compressor tools for cleaner and more even jobs providing excellence in execution and saving you countless dollars in replacing expensive air tool equipment..
- TRANSPARENT DESIGN: This air compressor in line dryer has a clear build that allows you to monitor the buildup and the amount of water and dust particles that this filter has trapped. Quick release valve conveniently located to removed anything trapped inside..
- SPECIFICATIONS: Each in line air compressor moisture filter comes with a 1/4” NPT inlet and outlet for any standard air hose with a quarter inch fitting and can handle pressure to 90 p....
Check StockHusky 12 Volt Inflator with Pressure Gauge to130-psi
- 165 max PSI 6.0 gallon tank (22.7 L) and 2.6 SCFM delivered @ 90 PSI pump, enable long tool run time with quick recovery for the portable air compressor.
- High efficiency motor of the electric air compressor is made for easy start up in cold weather or extension cord application. [14 ga or larger, 50 ft. (15.2 m) or less].
- 78.5 dBA noise level of the 6 gallon air compressor is made for a quiet work environment.
- High flow regulator and couplers of DEWALT portable air compressor are designed to maximize air tool performance.
- Long life oil free pump for maintenance free operation.
- Console cover protects controls and is removable to allow easy repair.
- Outlet tube rerouted to avoid being catch point.
- 30 lb weight makes unit easy to carry/store.
- 2 universal couplers to easily support two users.
- Ball drain valve for quick & thorough tank draining.
Check StockBOSTITCH Brad Nailer Kit, 18GA, Smart Point, Pneumatic (BTFP12233)
- Smart Point Technology: The electric brad nailer features easy nail placement as a result of a smaller nose compared to current BOSTITCH nailers and no need to compress the contact trip to actuate the tool.
- 18 gauge brad nailer drives 18 GA brad nails from 5/8-inch to 2-1/8-inch length.
- Oil-free operation reduces the risk of oil stains.
- Tool-free jam release mechanism for easy nail removal.
- Dial-A-Depth control for precise countersinking of brad nails.
- Selectable trigger system for sequential or contact operation.
- Other Features: rear air exhaust and belt hook with integrated pencil sharpener.
- Kit Includes: Nailer, 1/4-inch Air Fitting, Carrying Case and Extra No-Mar Tips.
Check Stock
YSTOOL 10L Pneumatic Fluid Extractor Dispenser Set ATF Refill Tool Kit for Changing Oil in Engine Transmission Differential Transfer Case Gear Gearbox Power Steering Coolant with Pump Assembly Tank
- YSTOOL fluid extractor and dispenser tool kit includes 3PCS 1M dipstick tubes, can insert into engine dipstick tube to extract and refill engine oil or transmission fluid directly, no more need to crawl about under lifted vehicles and avoid mess. Also can insert into any insertable pipe or tank to change non-corrosive and low-consistency liquids (such as differential fluid, transfer case fluid, gear oil, power steering fluid, coolant, water) in vehicle, jet ski, lawn mower or other small engine.
- This ATF engine oil refill tool set provides 15PCS ATF adapters to fit a variety of vehicle models, add oil from fill plug or help to push transmission fluid into the engine through the drain plug on the transmission pan. All the 15PCS metal adapters are marked with NO. and well packed in a case, compatible with Ford, BMW, Nissan, Honda, Audi, VW DSG, VW CVT, Skoda, Porsche, Benz, Mini Cooper, Kia, Toyota, Hyundai, Infiniti, VOLVO and Lexus. You can find appropriate models by applicable manual.
- YSTOOL pneumatic oil change tool set allows two-way operation of oil suction and refueling, quick and sparkless. Absorb, transport and distribute liquids under safe and clean conditions. The consistent conversion of the 2-way control valves (blue screw valve and air inle....
Check Stock
Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)
- ... of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use.
- General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience.
- Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life.
- Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can to pneumatic tools.
- Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools.
- Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools.
- It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering pneumatic tools to extend to....
Check StockCraftsman Air Compressor 2 Gallon Portable Air Compressor Hot Dog Tank 1/3 HP Oil-Free Max 125 PSI Pressure 0.7 CFM@40 PSI 0.5 CFM@90 PSI Model CMXECXA0200243 Red
- HIGH-PERFORMANCE: With a 2-gallon tank and a powerful 1/3 HP UMC motor, the compressor provides adequate stored air power and dependable performance.
- LIGHTWEIGHT & CONVENIENT: This 2-gallon air compressor is designed with a lightweight hot-dog tank and a handle, 17.8 pounds only, making it extremely....
- MULTIFUNCTIONAL: This compressor is ideal to tackle a lot of projects with ease like inflation, hobby painting, stapling, fastening, nailing, and....
- OIL FREE & DURABLE: It features an oil-free and maintenance-free pump system that provides better tool performance and longer tool run times.
- WHAT YOU WILL GET: 1 x air compressor, 1 x ball valve, 1 x quick coupler, 1 x 6 feet cord, 1-year limited lifetime.
Check StockDeWalt DXCM251 25 Gal. 200 Psi Oil LUBED Belt Drive Electric Air Compressor
- 200 maximum PSI provides 76% longer air tool run time vs. 30 gallon 155 PSI belt drive air compressors.
- 6.2 SCFM at 90 PSI provides the ability to operate a larger selection of air tools.
- Precision Automotive style pistons for greatly improved balance and durability.
- 78 dba operational noise level for a quieter work environment than direct drive oil free compressors.
- High flow regulator and coupler provide maximum air flow to air tools.
- 10 in. Heavy-duty Pneumatic wheels for maximum portability around the shop or job site.
- High efficiency aluminum Flywheel provides maximum air flow and lower start-up amps.
- Aluminum head and valve plate to maximize heat dissipation.
- Superior O-RING seals to eliminate oil leaks.
Check StockDeWalt DXCM201 20 Gal. 200 Psi Oil LUBED Belt Drive Electric Air Compressor
- 200 maximum PSI provides 53% longer air tool run time vs. 20 gallon 155 PSI belt drive air compressors.
- 6.2 SCFM at 90 PSI provides the ability to operate a larger selection of air tools.
- Precision Automotive style pistons for greatly improved balance and durability.
- 78 dba operational noise level for a quieter work environment than direct drive oil free compressors.
- High flow regulator and coupler provide maximum air flow to air tools.
- 10 in. Heavy-duty Pneumatic wheels for maximum portability around the shop or job site.
- High efficiency aluminum Flywheel provides maximum air flow and lower start-up amps.
- Aluminum head and valve plate to maximize heat dissipation.
- Superior O-RING seals to eliminate oil leaks.
Check Stock
