Best Air Tube Headphone
kenddeel Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
- ️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
- ️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
- ️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
- ️Tep: This set of headphone jack remover tool is considered a single-use tool..
- ️If you have any question, please feel free to contact us by email..
Check StockAOYUTC Metal Tube Headphone Plug Extraction Tool- Headphone Tip Removal Tool,Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
- PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes....
- 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This....
- HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table.....
- HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull....
- GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a 100% satisfaction guarantee. If you are not satisfied....
Check Stock
6:1 Dual Wall Adhesive Super Heat Shrink Tubing,Wire Repair,Mac Book Air Pro Charging Cable Crack Damage Charge Repair,Mouse Cable Protector,Saver Cover for Type C,iPhone,Apple Lightning,HDMI (12)
- ...16"(14mm), after shrinkage:Ø3/32"(2.3mm).makes a tight seal！Low shrinkage temperature, shrinking in just a few seconds！tarting Shrinkage Temp: +70°C，Full Shrinkage Temp: +105°C！If ordinary 2:1, 3:1 Heat Shrink Tubing can not be solved. Please choose this one.
- 【CRACK DAMAGE REPAIR！PROTECT CABLE】- for Headphone Cable，MacBook Air MacBook Pro Charger Cable，Damage Repair,Saver Cover for USB Data Cable,Type C Cable,Apple iPhone Lightning Cable，HDMI，Earphone Cable.Suit for Almost all Cell Phones, Computers and Chargers Cable.
- 【GLUE INSIDE】- When heat is applied, adhesive comes out and seals the connection！ultrathin！The thickness before shrinkage is only 0.3 mm, which is half of the ordinary Heat Shrink Tubing. More beautiful as a protective cover!creating waterproof and long-lasting insulation.Flame-Retardant Material，Safe and non-toxic！Excellent insulation！.
- 【EASY TO USE ！VERY SAFE】- It can be operated at home. Use a lighter or a candle or a heat gun..Simply slide heat shrink tube over your connection point and apply heat.Professional connections made in seconds.Operating temperature -45°C~125°C（-49ºF~257ºF），Shrinking temperature 70°C ~105°C （158ºF~221ºF）.
- 【BE CAREFUL】- make sure that the circu....
Check Stock
AIYIMA T8 6N3 Digital Tube Preamplifier Bluetooth 5.0 Hi-Fi Headphone Vacuum Tube Preamp for Home Wireless Receiver Audio Decoder Preamp PC-USB DAC APTX + with Remote Control
- ❶ Multiple audio input methods,It Support Bluetooth 5.0/PC-USB/RCA inputs from various devices like iPod, Phone, MP3, TV, DVD players, laptop, desktop computer or other streaming media players etc.,It's a nice vacuum Headphone tube preamp exclusively designed for the customers who pursue HiFi sound!.
- ❷ Tube T8 be used as a headphone amplifier,Can Enjoy high-quality lossless music at any time,RCA/3.5mm headphone output(With priority),RCA output to the powered speaker,amplifier & passive speaker,Headphone output is suitable for 16~300Ω headphones and headset.
- ❸ QCC3031 Bluetooth 5.0,Support APT-X,APT-X LL lossless transmission,Signal transmission faster and stable,let your enjoy the HiFi sound!.
- ❹ Adopt 6N3 tube vacuum design for easy replacement(such as 6N3,6H3,GE5657,396A,2C51,12B4A,GE5670,6H3n-E)with DC 12V power adapter,provide warm retro tube sound,With independent gain adjustment design for treble and bass.
Check Stock
Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover - 4PC
- PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
- 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
- HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Rotate the tool when you can't press it in..
- HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover..
- GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a....
Check Stock
TuparGo Headphone Stand with Single Rolling RGB Light for Desk PC Gaming Headset,Aluminum Alloy Connecting Rod and Non-Slip Rubber Pad, Suitable for All Over -Ear Headphone(Basic Black)
- RGB BACKLIT LIGHT: RGB rolling subtitles light make it look very cool and Suitable for Most Headphone.God said, "Let there be light," and there was light.【NOTE:This item without headphones】.
- STURDY AND NON-SLIP:Connecting rod made of aluminum tube provides a stable and safe foundation for your headphone. Thick rubber base avoids PC headphone stand to slip. Note: The headphone is not included..
- EASY TO ASSEMBLE:Aluminum alloy tube to connect headphone holder and base,Connect the cable to the USB port of the PC,Plug and play..
- SIZE AND WIDE USE: RGB Headset stand featuring 10.5 inches standing height, Perfect for supports all size headphones including Bose, Beats, Sony, Panasonic, AKG, JBL, Audio-Technica, Sennheiser, Shure and more.Great PC headset holder for your headphone and saving desk space..
- Headphone stand without light?? Worried about hitting a child with the hook-type headphone holder?Don’t need USB port headphone holder?This item is a good choice, test before shipping. Buy it without worry..
Check StockHeadphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover ，Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices 6 PCS
- Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks..
- Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover..
- Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough..
- Tep: This set of headphone jack remover tool is considered a single-use tool..
- If you have any question, please feel free to contact us by email..
Check Stock
Upgrated to Version 2.0 - Headphone Jack Removal Tool - Headphone Plug Extraction Tool, Tubes of Different Thickness, Jack Remover
- PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack..
- 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved..
- HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above..
- GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarant....
Check StockVacuum Tube Preamp MM MC Phono Stage Desktop Headphone Amp
- Douk Audio T3 PLUS can be used as a MM/MC phono preamp, a tube audio preamp and a headphone amplifier, powerful function in mini size, specially....
- Multiple audio inputs for different purposes: with 3.5mm AUX and phono inputs, supports both MM and MC cartridges, compatible well with different....
- With headphone output and perfect design: can be used as a headphone amplifier to drive 32-300 ohm headphones. Reasonable and advanced circuit and....
- Pluggable Vacuum tube design and HiFi sound: using 6A2 tubes to soften, sounds warm and delicate, full and mellow, much softer and more listenable.....
- Unique appearance and proper size: vertical placement design, black solid aluminum chassis with wire drawing and frosted technology, looks cool and....
Check Stock
Preamplifier Preamp Tube Board DIY Kit 6J1 Preamp Tube Board Preamplifier Headphone Amplifier
- 【6J1 ELECTRON TUBE】Preamplifier adopt 6J1 electron tube, classic collocation. This is a preamplifier + headphone amplifier that can be used with a post-amplifier or an active speaker, or it can be used with headphones..
- 【POWER SUPPLY】Preamplifier adopts 12V DC power supply, internal stable boost to 100V to ensure the performance of the tube. The headset can be pushed to 300 ohms, the general recommendation is 16-150 ohms..
- 【WARM AND MELLOW MUSIC SOUND】A cost-effective preamplifier with warm, mellow, sweet and transparent sound. The sound of this board is warm, mellow, sweet and transparent, and full of music..
- 【ENJOY DIY】Preamplifier is a cost-effective preamplifier. Replaceable op amp and upgrade the tube, just plug it in the direction of the foot. This preamplifier allows you and your family to enjoy the joy of DIY..
- 【STABLE PERFORMANCE】Preamplifier preamp tube board is carefully debugged circuit with stable performance, quiet and no noise. Output port: 3.5MM headphone output, preamp output..
Check Stock
Douk Audio P1 Bluetooth Vacuum Tube Preamp Headphone Amplifier with Extra GE5654 Tubes
- ...1 Preamp has been acclaimed by countless audiophiles worldwide, now we upgrade 6J5 to JAN5654 / GE5654 tubes according to many audiophiles' feedback, the sound quality will be greatly improved..
- With 3 kinds of audio input(Bluetooth/USB/RCA) and 2 kinds of output(RCA/3.5mm headphone), P1 can be used as HiFi tube Preamp, USB DAC or headphone amp with HiFi clear, warm, dynamic, sweet tube sound, bringing extremely high-quality listening experience..
- Bluetooth 5.0 (QCC3034) supporting APTX-HD lossless transmission. PC-USB (CM6642) supporting 24bit 192KHz and compatible with Windows/Mac/Linux system, matching well with many audio devices such as iPod, Phone, MP3 players, TV, Blu-ray players, Echo Dot, CD players, etc..
- Adopting NE5532 op amp+classic 47 headphone amp architecture which can drive 32-300 ohms headphones, and a bypass switch is specially designed to turn on/off the tone control, more convenient to enjoy original sound or obtain more delicate sound with treble and bass control knob, adding much fun and higher playability..
- Exquisite appearance with proper size, blue and ora....
Check StockMusic Hall pa2.2 MM/MC Phono Preamplifier with Analog to Digital Converter
- The upgraded version of Fosi Audio BOX X2. NEW-generation phono preamp for unrivaled sound quality..
- JAN 5654W Tube MM Phono Preamplifier: The BOX X4 phono preamp supports 3.5MM AUX and MM turntable input, converting phono signals to Line Level....
- Tube Headphone Amplifier & Preamplifier: The BOX X4 is designed with a 3.5MM AUX headphone and RCA output, highly useful beyond imagination..
- Applicable Vacuum Tube Model: 6K4/6J1/6J4/GE5654/6AK5/66*In vacuum tubes, etc. You can replace the vacuum tubes to DIY your stereo system. Different....
- What You Get: BOX X4 phono preamp, DC 12V power supply, user manual, our worry-free 18-month warranty, and friendly customer service..
Check StockAIYIMA Tube T6 PRO Bluetooth 5.0 Tube Preamplifier Hi-Fi Headphone Amp Vacuum Tube Preamp for Home Audio Amplifier Wireless Receiver Audio Decoder Preamp PC-USB DAC APTX
- Multiple audio input methods,It Support Bluetooth 5.0/PC-USB/RCA inputs from various devices like iPod, Phone, MP3, TV, DVD players, laptop, desktop....
- Tube T6 PRO be used as a headphone tube preamplifier,Can Enjoy high-quality lossless music at any time,RCA/3.5mm headphone output(With priority),RCA....
- QCC3008 Bluetooth 5.0,Support APT-X,APT-X LL lossless transmission,Signal transmission faster and stable,let your enjoy the HiFi sound!.
- Adopt 6Ж1п-EB tube vacuum design for easy replacement(such as 6J1, 6J2, 6AK5, 6AK5W, 6F31 ,6BA6, 6K4п, GE5654, 6Ж1п,etc)provide warm retro tube....
Check Stock
