Categories

Best Air Water Welding Hose

ARCFONY Plasma Cutter Welder Machine - 50Amp CTS528XP Non-Touch Pilot Arc Plasma Cutter, 3 in 1 200Amp TIG MMA Welders, Dual Voltage 110V/220V

  • ...ting rough, painted and rusty surfaces, producing minimum slag, maximum cutting thickness of 14mm, ideal cutting thickness of 10mm..
  • TIG & MMA Mode: 200Amp tig welder machine adopts HF arc ignition technology and has the functions of HF TIG, spot TIG and pulse TIG. The welding has little damage to the base metal and can weld thin process parts. 180Amp MMA adjustable arc current, arc welding stability. Suitable for 1.0mm to 4.0mm different acid base electrode welding..
  • Easy To Use: Plasma Cutter machine adopts IGBT inverter technology, 110/220V dual voltage automatic recognition of input current and voltage. Plasma Cutter equipped with NPT 1/4 "air regular, Duty cycle is 60%. Built-in post time, when you stop cutting, the air runs for a minute to cool the consumables of the plasma cutting torch and extending the life of consumables..
  • Safe & Portable: Built-in overload protection and fan cooling system. When the output current and machine temperature exceed the set standard, the plasma cutter will automatically power off. It can be connected to 110 or 220 volt outlets without tools and can be carried in the works....
Check Stock

Goplus® 50ft Twin Welding Torch Hose Oxy Acetylene Oxygen Cutting 1/4-Inch 300psi

  • 【Compatible with Both Oxygen and Acetylene】 Our twin gas welding hose is color coded. The green one is for Oxygen and the red one is for Acetylene and fuel gas. What you should note here is that the maximum working pressure of our oxyacetylene twin welding hose is 300psi. Broken pressure up to 900psi..
  • 【High Quality Rubber Material】 Made of high quality rubber material, our rubber welding hose be used on extreme environment. Not only does it have excellent performance in low temperature, even in subzero temperatures, but also has good oil and abrasion resistance, which prolongs the life of the hose in a maximum effect..
  • 【Sufficient Length and Standard Diameter】 The whole length of each welding hose is 50 feet. It is long enough for daily life use or industry and agriculture use. Other than that, with standard diameter, 1/4”, our oxyacetylene twin welding hose has wide application, which meets most people’s needs..
  • 【Multifunctional Twin Welding Hose】 On the one hand, our twin welding hose can be used for welding machine. On the other hand, it has outstanding performance in gas cutting function, as well. Except for that, the twin gas welding hose can also be used for transporting gas, which is a good choice for industry and agriculture....
Check Stock

WeldingCity 150 Amp Power Cable Hose 57Y03R 25-ft Rubber 1-pcs Style for Air-Cooled TIG Welding Torch 9/17 in Lincoln Miller ESAB Weldcraft CK Everlast AHP

  • Premium quality power cable hose for air-cooled and water-cooled TIG welding torch 9, 17, 18, 20, 25 and 26 series..
  • For air-cooled torches 9 and 17 series: standard Weldcraft style one-piece type rubber-jacketed power cable hoses 57Y01R (12.5-ft) and 57Y03R (25-ft....
  • For air-cooled torches 26 series: standard Weldcraft style one-piece type rubber-jacketed power cable hoses 46V28R (12.5-ft) and 46V30R (25-ft and....
  • For water-cooled torches 20 series: standard Weldcraft style power cable hoses (rubber-jacketed with fabric sleeve) 45V03R (12.5-ft) and 45V04R....
  • Compatible with most TIG welders from Lincoln, Miller, ESAB, Everlast, Eastwood, AHP, etc. US-based welding and hardware supplier. Strong technical....
Check Stock

JBscoop Garden Hose Holder Stainless Steel Small Wall Mount Garden Hose Hook, Ideal for Water, Air, Hydraulic Hose, Ropes, Extension Cords Heavy Duty & Rust Proof, Size:6.3x7x6.3 Set of 1

  • HIGH MATERIAL QUALITY: JBscoop water hose hook is made of 304 Stainless Steel material, withstand harsh environments, sturdy and durable, good aspect, rust proof, easy to mount. Package include SS Screws, plugs and instructions.
  • COVENIENT USE: Our wall mount Hose hangers are Ideal for water hose, extension cords, air compressor hose, Welding leads, Vacuum hose, Shore power cords, RV hose. Perfect for garden , garage organization and industry. It can be used as hose butler or hose caddy.
  • SAFETY & ORGANISATION: Wall mounted hose rack will turn your garden, workshop into an orgnized area, Save space, and minimize tripping hazards and risk of accidents.
  • SIZE & CAPACITY: Our heavy duty hose holder wall mount measure 6.3x7x6.3 Inch, it can hold 90 ft of 1/2 diameter hose, 80 ft of 5/8 diameter hose, 70 ft of 3/4 diameter hose.
  • Easy to use: Utility hooks mounts on fence, side of house or wall. It can be mounted on concrete, wooden boards and lime walls. It is easy to install with the attached stainless steel screws and plastic plugins..
  • UNIQUE DESIGN: product design is made exclusively BY JBscoop, the design is patent-pending..
Check Stock

YYST Garden Hose Hanger Wall Mount for Water Hose, Pool Hose, Vac Hose - Hold up to 150 Feet of 5/8’’ Hose or 50 Feet of 2' Hose - No Hose Included (1)

  • Hose Storage Capacity – Easily accommodate 150 feet of 5/8 Inch Hose or 50 Feet of 2″ Hose ..
  • Durable and Tough Material – Stainless steel Base with Anti-UV Bungee. Last for years. Withstand heavy usage. Package include SS Screws, plugs and instructions..
  • 10 KG – Hold Heavy Cords up to 10 KG (20 LBS). Please hold hoses up to 10 KG (20 LBS)..
  • No Sticking Out and No Getting in the way – The metal portion only sticks out 15MM (0.6″) from the wall when not in use. No sticking out means no getting in the way when not in use. Suitable for some narrow space..
  • Convenient Use :Ideal for water hose, extension cords, air compressor hose, Welding leads, Vacuum hose, Shore power cords, RV hose. Perfect for garden , garage organization and industry. It can be used as hose butler or hose caddy..
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine 110V Extruder

  • 1.[Description]: Voltage: 110V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
  • 5.[Packing]: Each set includes welding shoe+holder+flat welding shoe+corner welding shoe+heating elements for hot air blower+disassembly tools+operation manua....
Check Stock

1600W Hand Extrusion Welder Gun Plastic Handheld Extruder Welding Gun PP HDPE LDPE Pipe Welding Machine (220V Extruder)

  • 1.[Description]: Voltage: 220V, Frequency: 50/60Hz, Weight: 6.5Kg, Power Wire Length: 3M, Hot Air Blower Power: 1600W, Welding Rod Heat Power: 800W, Motor Power: 800W, Extruding Volume: 2kg/h, Welding Rod Round: 3/4mm..
  • 2.[Application]: Sheets Welding: PP/PE hot melt sheets like water tanks, plating tanks, water tower, and plastic containers.
  • Pipe Welding: PP/PE hot melt pipes like pipes flange welding, pipe welding and repairing.
  • Membrane Welding: PP/PE hot melt membrane Welding like geo membrane and waterproofing membrane..
  • 3.[Details]: DUAL HEATING SYSTEM: Dual heating system that material preheating and welding rod melting can be changeable to avoid failure of welding. TEMPERATURE DISPLAY: Show "welding rod heating system"working temperature. ROTATING NOZZLE: The 360-degree rotating hot air/Welding nozzle can be applied to different needs..
  • 4.[Advantage]: MOTOR COLD START PROTECTION : Extruding motor will shut down automatically if it has not reached the preset melting temperature hich avoids loss caused by operating mistakes. DRIVNG MOTOR: Hitachi drill with reliable quality and strong power..
Check Stock

WP-17FV TIG Welding Torch 150Amps Flexible Head Neck With Gas Valve Control 4M Hose Cable

  • This WP-17FV Flexible TIG Welder Torch Allows to bend the torch head at any direction you need while welding..
  • It is with 5/8-18RH Gas Power Hose Connnector,10-25plug and 2 Pins female air socket.
  • Cable Hose with Cloth Cover, better heat dispersion performance.You will get 1 complete tig welding torch at this price..
  • It with gas valve control, better for control gas..
Check Stock

OYHBO Inert Gas Welding Hose 6.56FT - Argon Flow Meter Regulator Adapter Hose - Mig Tig, 5/8\ UNF-18RH Fittings

  • Premium rubber welding gas regulator hose, high-quality toughness, environmentally friendly, non-toxic, harmless to the human body..
  • 6.56 feet long inert gas hose, crimped 5/"8 UNF-18RH gas fittings on both ends, will thread into most tig mig welders, works great with argon CO2 welding gas regulator..
  • 300PSI Working Pressure - 600PSI Burst Pressure. High pressure resistance, wear resistance, tear resistance, tortuosity resistance, hard to harden in cold weather..
  • This welding gas hose compatible with argon, argon/CO2 mixture, helium and any other welding gases, suitable for various TIG and MIG welding machines..
  • This inert welding hose suits for our OYHBO Argon CO2 Regulator. We supply all kind of gas welding equipment & accessories, you can visit our store to purchase. Thanks..
Check Stock

Zistel CO2 Argon Regulator with Gas Hose TIG Welder

  • Argon/CO2 Regulator For Welding: Zistel Argon Regulator is a ideal choice for professional TIG/MIG welding applications, which can be used to reduce and control pressure levels..
  • Argon Flowmeter With Pressue Gauge: Our argon flowmeter is equipped with pressure gauge, allowing you to view how much gas is left in the tank range 0 to 3500psi..
  • CGA580 Inlet Connection: Zistel pressure regulator is suitable for standard Argon /O2/N2 Tanks with CGA-580 Inlet Connection. You can connect the welding hose via female 5/8UNF-18RH fitting..
  • Hose Included: Zistel 10Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects..
  • Field of Application: Idea choice for welding, cutting ,chemical and electronics industry.
Check Stock

EVEAGE Upgraded Water Hose Holder Freestanding Hose Stand Outdoor Garden Hose Holder Stake For Outside Yard Detachable Double-Sided Suspension Heavy Duty Thick Metal

  • 【Nice Water Hose Storage Partner】 Don't More Worry About Your Garden Water Hose That Always A Messy Placement, Choosing Our Hose Holder To Extend....
  • 【Upgrade Double-Sided Suspension】 Freestanding Hose Holder Offers More Suspension Needs, Misplaced Design Not Only Can Suspend Two-Sided Water....
  • 【Four Corners Stabilization Design】 Our Hose Stand Is Different From Others, Four Plug-In Corners Design Increase Width And Length, Bigger Grip....
  • 【Heavy Duty Thickened Steel Frame】 Garden Hose Holder Stake Is Made Of Heavy Duty Thickened Steel, All-Round Welding For Ground Corners And Hanger....
  • 【Wide Application Quality Warranty 】 Water Hose Holder Is Composed Of Three Assembled Holders, Easy To Install And Move Any Place, Especially....
Check Stock

WeldingCity 200-amp WP-26FV-25R Flexible Head w/Gas Valve Air-cooled TIG Welding Torch Complete Package with 25-ft Power Cable Hose and Adapter 45V62

  • Premium quality 200-amp air-cooled WP-26 complete TIG welding torch package with 12.5-ft or 25-ft 1-piece EPDM rubber power cable. Shipped as un-assembled..
  • 12-pcs torch package includes: 200-amp air-cooled WP-26 series high quality silicone rubber torch body with handle, 1-piece type EPDM rubber power cable hose 46V28R (12.5-ft) or 46V30R (25-ft), Nylon cable cover with zipper.
  • brass cable adapter 45V62 and accessory kit (1/16" and 3/32" collets, collet bodies, ceramic cups and back caps)..
  • Silicone rubber insulated torch bodies are designed for long lasting service. Available head types: WP-26 (regular), WP-26F (flexible head), WP-26V (head with gas valve) and WP-26FV (flexible head with gas valve)..
  • 200-amp air-cooled WP-26 series TIG torches are excellent for TIG welding on medium to heavy gauge materials. With brass cable adapter 45V62 to connect the torch to gas tank and welding machine with standard 1/2" threaded output stud. Ideal replacement of TIG welding torch for all mainstream welders on markets, as well as ideal for many other aftermarket or equivalent welders. See all listed pictures for torch parts and rear plug. CHECK YOUR TIG WELDER FOR MATCHING..
  • U.S. based welding and hardware supplier. Strong technical support with experienced custom....
Check Stock

Plasma Cutter TIG Welder Pulse Stick Welder - CT418 3 in 1 Combo Welding Machine 180A Pulse TIG/Arc Welding 40A Plasma Cutting 110/220V Dual Voltage Digital Display Portable Welder Machine

  • ❆ Advantage: We have updated our CT418 machine. Under the condition that the basic functions remain unchanged, our machine has increased the PULSE function to make the welding effect even better. And the machine adopts a brand-new digital panel, which is easier to set up and operate. It is still an automatic dual voltage dual frequency (110/220V, 50/60HZ)..
  • ❆ 10-40Amp Plasma Cutter: 40amp plasma cutter current output @220V. Compact plasma cutter has a handle for portability and uses non-hazardous compressed air to cut stainless steel, alloy steel, mild steel, copper, and aluminum.
  • ❆ PULSE TIG Welder: 10-180A Pulse TIG Welder Electric Current Output @ 220V. Quality TIG welding on stainless steel, nickel alloys, copper, brass and bronze etc. The newly added PULSE function makes the welding shape more beautiful and improvers tungsten life..
  • ❆ Stick/ARC Welder: 10-160amp output current @220V. Easy arc start, stable welding arc.
  • Deep weld pool and beautiful welding shape..
  • ❆ What You Get: Our worry-free 12-month warranty, and friendly customer service. The CT-418 machine comes with a PT-31 cutting torch, TIG-17FV torch for tig welding. You also get stick holder, earth clamp, power cable, air hose, and torch co....
Check Stock