Categories

Best Alloy Steel Die Stamping Part

GEARWRENCH 39 Piece 1/2inch Drive 6 Point Impact Socket Set, Standard & Deep, Metric - 84948N

  • Made from chrome molybdenum alloy steel (Cr-Mo) for exceptional strength and durability.
  • Off corner loading design reduces fastener rounding.
  • Manganese Phosphate coating to resist corrosion.
  • Parallel neck down design on 3/8 inches, 7/16 inches, 1/2 inches, and 9/16 inches sizes for improved access to restricted fasteners.
  • High visibility laser etched markings for quick size identification.
  • Secondary hard stamping of part number and size.
  • Includes blow mold case with reinforced steel hinges and steel buckles for strength and security.
Check Stock

GEARWRENCH 71 Pc. 1/4' Drive 6 Pt. Universal Impact Socket Set, Standard & Deep, SAE/Metric - 84903

  • Chrome Molybdenum Alloy Steel (CR-MO) For Exceptional Strengh and Durability.
  • Surface Drive Technology Reduces Fastener Rounding.
  • Black Phosphate Coating to Resist Corosion.
Check Stock

Senrog Metal Bench Block for Jewelry Stamping Making (No Rebound),Size:Dia.:3 Inch (76mm) and Height: 9/16 Inch (14mm),Steel Bench Block Made of Alloy Steel, Mirror Surface and Chrome-Plating

  • Senrog Metal Bench Block for jewelry making and metal stamping working tool, Made of alloy steel with heat treatment, Hrc 50-54..
  • The metal bench block size : Diameter: 3 inch (76mm) and height: 9/16 inch (14mm), The size is enough for jewelry stamping making..
  • The steel bench block base on no rebound design, The steel part is mirror finished with chrome-plated, It’s bottom is wapped in soft plastic, Which can reduce the rebound when knocking..
  • The tool allows you to make a nice match in jewelry diy making and keep your memory in your working.Make your work more perfect..
  • The tool is carefully made by senrog, Each craft is very particular, And it’s packaged in a nice box of Senrog brand..
Check Stock

Captain America 20 inch Metal Shield Cosplay Shield Original Version 1

  • ✪Full-size replica made of aviation aluminum, high-quality finishes and details, with iconic red, white and blue patterns, leather straps, precise....
  • ✪Aerospace aluminum alloy is the leader among aluminum alloys, with high strength and excellent resistance to peeling corrosion, and is usually used....
  • ✪The protective cover is made by die-casting process, which completely exceeds the stamping process on the market. Has die-caster. The protective....
  • ✪The diameter is 20 inches, which can be compared with 1: 1 measurement. The handle is made of leather material, which is comfortable to wear，It....
  • ✪After-sales service guarantee: If there is damage during transportation, or if you are dissatisfied with our products, please contact us as soon as....
Check Stock

OWDEN Professional Steel Bench Block（No Rebound), Metal Bench Block for Jewelry Stamping Tool,(Diameter: 3 Inches, Height: 3/4 Inch) Steel Part: Mirror Polishing with Chrome Plating.

  • OWDEN designed round steel bench block for jewelry making & metal stamping, Size: 3”x3/4”.
  • The steel part is mirror finished and chrome plated.(No rebound design）.
  • The base is made of soft plastic and wraps the bottom of the steel part..
  • The soft bottom helps reduce the rebound force when tapping. It Will make the patterns or letters that we work more perfect..
  • Used for metal stamping blanks/ jewelry tags, and for flattening,chasing, shaping, laying-out, shaping and stamping metal..
Check Stock

Yoption 27 Pieces Leather Stamping Tool Set, 26 Letters Alphabet Stamps Steel Punch Tool 9mm+1 Stamping Handle for Leather Craft (9mm)

  • Quality Material: The letter leather stamps are made of alloy steel. Size: The height of Alphabet is 9mm..
  • 27Pcs/Set leathercarft stamping tool, including 26 Pcs A-Z alphabet letters + 1 stamping handle. It's easy and fun to stamp designs in leather with these tools..
  • Suitable for handmade Leather jacket, bags, shoes, belt, wallet, watch wristband and other crafts embellishments. Best used for vegetable tanned leather with a thickness of more than 1.5mm. AN AWESOME TOOL for leather craft professionals and amateurs..
  • These stamps are made of extremely strong, heavy-duty alloy steel for powerful impact and long service life, giving you stronger imprints that display more accurately. You can make clear and accurate stamping results with less time and effort..
  • Use Suggestions: Wet the leather with a wet sponge before works,Then use the hammer to hit the end of the handle and control the power, avoid ghosting or surface damage..
Check Stock

Monopoly Luxury Edition Board Game

  • Elegant two-tone wooden cabinet with burled wood veneers and decorative metal plaques.
  • Recessed faux-leather rolling area with gold foil stamping - Gold foil stamped game path.
  • Two integrated storage drawers with die cast handles and built-in storage.
  • Plated die cast Monopoly tokens, houses and hotels - Premium Chance, Community Chest, Title Deed cards and Monopoly money.
  • Faux-leather Title Deed card holder with gold foil stamping.
Check Stock

Metal Stamping Kit, Complete Jewelry Stamping Tools with 74pcs 3mm Artistic Font Uppercase & Lowercase Letter Punches and Number Punch Set, Metal Stamping Jig, Stamps Hammer, Steel Bench Block

  • 【Professional Metal Stamping Set】- You will immediately enjoy the most complete DIY metal stamp set! It includes a metal stamping jig, a stamp hammer, a steel pedestal and 74pcs 1/8"/3mm punch set, includes "A-Z" letters, "a-z" letters, "0-9" numbers, a "❤" and 2pcs "&" symbol punches..
  • 【DIY Art Stamp Punch】-The same artistic font punch set can freely form continuous phrases and digital imprints to create unique and fashionable hand-stamped jewelry and craft components, such as rings, bracelets, necklaces, earrings, keychains , Pendants and pendants..
  • 【Metal Stamping Jig】- This easy-to-grip stamp holder makes metal stamping easy for beginners and prevents your fingers from being injured. It is designed to keep the stamp flush on the stamped blank and metal surface, thereby promoting a clear and uniform complete impression..
  • 【Metal Stamp Hammer】- The double-sided hammer head is forged from high-quality high-carbon steel, which is not easy to break, has high hardness, and is durable. The ergonomic handle helps jewelry making more comfortable, and provides proper strength, and every strike will be more accurate..
  • 【Round Steel Bench Block】- Its size is 3”x3/4”, the steel part is mirror-plated with chrome (no rebound design), the bas....
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • ...ts need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

Yoption 27 Pieces Leathercarft Stamping Tool Set 26 Letters Alphabet Stamps Steel Punch Tool 6mm+1 Stamping Handle for Leather Craft

  • High Material: The leathercarft stamp is made of alloy steel. Size: The height of Alphabet is 6mm..
  • 27Pcs/Set leathercarft stamping tool, including 26 Pcs A-Z alphabet letters + 1 stamping handle. It's easy and fun to stamp designs in leather with....
  • Suitable for handmade Leather jacket, bags, shoes, belt, wallet, watch wristband and other crafts embellishments. Best used for vegetable tanned....
  • These stamps are made of extremely strong, heavy-duty alloy steel for powerful impact and long service life, giving you stronger imprints that display....
  • Usage: Wet the leather with a wet sponge before works,Then use the hammer to hit the end of the handle and control the power, avoid ghosting or....
Check Stock

GEARWRENCH 19 Piece 1/2 Inch Drive 6 Point Impact Socket Set, Deep, SAE - 84934N

  • Chrome molybdenum alloy steel (CR-MO) 1/2inch drive impact sockets with exceptional strength and durability.
  • Off-corner loading technology to reduce fastener rounding, even after repeated use.
  • Black phosphate corrosion-resistant coating, laser etched with high-visibility markings and hard stamped labels.
  • Deep 6-point sockets with chamfered openings and an attachment port compatible with traditional ratchets.
  • Parallel Neck down design on 3/8inch, 7/16inch, and 9/16inch sockets allow improved access around Restricted fasteners.
  • Meets or exceeds ASME B107. 2 specifications for proven strength.
Check Stock

HIWARE Lobster Crackers and Picks Set, 10-Piece Crab Leg Cracker Tools - Stainless Steel Seafood Crackers & Forks Nut Cracker Set - Dishwasher Safe

  • ...al with crab, lobster, scallop, oysters and more. Instead of the laborious and messy disassembling of the lobster and crab manually, you don’t have to worry about the hard shell or not being able to get the whole meat out, using seafood tools allows you to enjoy seafood elegantly and simply..
  • MADE OF DIE-CAST ZINC ALLOY AND STAINLESS STEEL: Our crackers are constructed of die-cast zinc alloy which has better hardness and is especially suitable for handling these hard-shelled foods. The stainless steel picks are also very strong and durable. They are all anti-corrosion and anti-rust, and will serve for a long time..
  • DESIGN FOR DIFFERENT SEAFOOD PARTS: The different serrated parts of the cracker are specially designed for different sizes and shapes of seafood. The slender crab legs can be processed in the smaller serrated part, and the larger claws can be placed on the large jagged part. The picks can get the meat from the crab legs or lobster tail easier and faster..
  • DISHWASHER SAFE: Our crackers and picks are totally dishwasher safe, So don’t worry about cleaning..
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • ...ts need to be mounted in a wrench. Broadly speaking, they are all roughly the same, with a few notable exceptions. The tap wrench from Muzerdo, is the best on the market..
  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces w....
Check Stock