Best Alloy Steel Pipe Fittings
Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)
- Long nipple for connecting two threaded pipes and extending pipe length.
- 1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
- Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
- Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
- These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock(400 pcs) 1/8\-27 X 5/16\
- Superior quality parts by Holo-Krome, made in the U.S.A..
- Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
- An internal hex socket drive is also known as an Allen drive..
- Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..
Check Stock(100 pcs) 1/4\
- Threaded pipe plugs are designed to close the ends of internally threaded pipes and fittings..
- An internal hex socket drive is also known as an Allen drive..
- Alloy steel fasteners are significantly stronger than standard low carbon steel fasteners..
Check StockCsst Flexible Gas Tubing 1/2 X 75
- Saves time - 60% time savings vs. steel pipe fitting.
- Cleaner and easier to handle than black steel pipe.
- Bends around corners eliminating need for additional joints and fittings.
- Use coordinating HOME-FLEX CSST fittings.
- Great for seismic areas - ridged pipe often leaks after even small tremors.
Check Stock
EGSTAOR Bathroom Adjustable Wrench for Tight Spaces, 6-75mm Multifunction Aluminum Spanner for Plumbing Task Pipe Tube Nut Toilet Washbasin Sink Pool, 9-Inch (Silver)
- ⚙ 3-IN-1 ADJUSTABLE WRENCH -- ✔ Wide aluminum adjustable spanner wrench.
- ✔ The bottom of handle design for removing large convex cross screw.
- ✔ 2 extra blades fixed on jaw by screw nuts to scrape away stains on smooth surface, or cut soft plastic pipe..
- ⚙ LARGE OPENING FOR PLUMBING TASKS -- 6-75mm(0.25''-2.95'') wide jaw, adjusted quickly by smooth-going scroll wheel. Suitable for plumbing tasks in bathroom, toilet to tighten or disassemble sanitary ware, washbasin, pipe, plastic/brass nut, rounded fasteners..
- ⚙ EASY TO USE -- Detachable long jaw can be reversible to use the flat side, or the arc side epiuped with teeth for clamping tightly round tube nut. 9'' long adjustable wrench fits for tight work space. The handle with square hole end, easy to grip and hang..
- ⚙ ALUMINUM ALLOY WRENCH -- Made of lightweight aluminum alloy, reduces damage on ornamental pipe and tube nuts effectively, great for light duty works. Non-slip, rust/corrosion resistant after the surface treatment..
- ⚙ WORRY-FREE PURCHASE -- We guarantee to provide 12 months after-sales service. Please note that our adjustable wrench is made of alumium alloy and designed for household pipe fittings, NOT for high torque jobs, or steel nuts/fasteners..
Check Stock
Premium Industrial PVC Pipe Schedule 80 Grey 1 Inch (1.0) Grey/PVC / 5 FT
- ...n hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
- Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
- Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x18-4..
- Because these are authentic parts, cleaning and sealing is required prior to use to prevent rust. Each pipe comes coated in a light industrial grease to prevent rust. For your convenience....
Check Stock
1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (10 Pack)
- 3/4 INCH PIPE ELBOW – TEN PACK: Our Brooklyn Pipe cast iron fittings 10 pack elbow pipes are made with from superior steel with 100% durability and strength and provides you with great flange elbow fittings at a very affordable price..
- PERFECT FOR DIY: Whether you’re looking to build a pipe shelf, pipe towel rack, pipe lamp, our malleable 90 degree elbow industrial fitting is up to the task. These fittings are for decor and DIY projects only, they are not rated to carry gas or water..
- RAW IRON: Our 3/4 inch black malleable iron pipe fittings are raw and unfinished iron. This means that you will need to seal or paint the flanges for your project. When handling raw iron, it’s normal for your hands to get dirty. You’ve probably seen iron workers in movies, they don’t come home clean!.
- ONE CONVENIENT PACK: Our 3/4 90 degree elbow threaded flanges fittings pipes give you 100% super convenient benefits than other bands because our Brooklyn Pipe elbow is designed to be compatible with your all project parts.
- UNLEASH YOUR CREATIVITY: We inspect and pack each pipe fitting and we offer a LIFETIME warranty on our products, just give us a call or send an e-mail. Now, with our black pipes bring the rustic, industrial style into your home, office or any inte....
Check StockFXIXI Mini Adjustable Spanner,16-68mm Mini Adjustable Spanner Wrench Short Shank Large Openings Ultra Thin
- Ultra-light aluminum alloy pipe nut short handle large opening adjustable wrench, not to hurt the decorative fittings and nuts, such as gold-plated..
- Suitable for sanitary ware, washbasin, tube nut disassembly, narrow space more convenient to use..
Check Stock1/2\ x 24\ Black Painted Industrial Pipe, Home TZH 4 Pack Threaded Black Iron Pipe Nipple for DIY Project/Furniture/Shelving Decoration (4, 24\)
- Malleable Iron Cast Pipe, Coating, Black, 10 Pack 3/4 Inch Pipe..
- Black steel pipe thread, Length: 16 inches with 3/4 inches thread, be made of Carbon Iron and Silicon Alloy Composition..
- Easy to use: there are two thread in the ends, put caps or other fittings to connect through 3/4 inch thread..
- Application: wide application for any shelf installation such as bookshelf, table, garden shelf and some vintage furniture, it is widely used for many DIY projects..
- Matt black painting on the outer surface, good appearance, good touch and smooth surface, resistance rust..
Check Stock
3/4\ x 30\ Black Painted Industrial Pipe, Home TZH 4 Pack Threaded Black Iron Pipe Nipple for DIY Project/Furniture/Shelving Decoration(4, 30\)
- ...n hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
- Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
- Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x6-6..
- Because these are authentic parts, cleaning and sealing is required prior to use to prevent rust. Each pipe comes coated in a light industrial grease to prevent rust. For your convenience ....
Check Stock
Pipe Décor Desk Outside Leg, Authentic Industrial Pipe, Unfinished Dark Grey Black Steel for Rustic Look, for Classic H Design Desks or Tables, 28.75-in H x 21.5-in, 1-in Diameter, 1-Pack
- flange specs 3.5-in diameter, assembled leg specs 28.75-in tall and 21.5-in wide.
- Includes 1 “H” table leg comprised of (2) 1-in x 8-in pipes, (2) 1-in x 18-in pipes, (1) 1-in x 16-in pipe, (4) 1-in round flanges, (2) 1-in tees, (8) screws, instructions, and a clean and seal sheet.
- pipes and fittings are industrial grade black steel and malleable cast iron.
- standard steel grey color, commonly known as black within the plumbing industry.
- PIPE DECOR genuine industrial pipes and fittings will stand the test of time.
- You will know Pipe Décor parts and accessories when you hold them, beauty and beast, strength and style.
- easily customize your PIPE DECOR projects with our many sizes of pipes and fittings.
- PIPE DECOR pipe and fittings are coated with a light industrial grease to prevent rusting.
- we highly recommend that you clean and seal each piece, before assembly, to ensure that they stay rust-free.
- sealing the pipe with polyurethane spray will protect it from rust and scratches.
Check Stock
Pipe Décor 1½ in. x 12 in. Black Steel Pipe, Pre-Cut, Industrial Steel Grey Fits Standard 1½ Inch Black Threaded Pipes, Nipples and Fittings, 4 Pack
- ...n hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
- Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
- Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x12-4..
- Because these are authentic parts, cleaning and sealing is required prior to use to prevent rust. Each pipe comes coated in a light industrial grease to prevent rust. For your convenience....
Check Stock
Pipe Decor 1/2” x 72” Malleable Cast Iron Pipe, Pre Cut, Industrial Steel Grey Fits Standard Three Quarter Inch Black Threaded Pipes Nipples and Fittings, Build Vintage DIY Furniture, 4 Pack
- ...n hand when you need them. Multipack quantity gives great value and ensures you don’t run out in middle of a project. Create sturdy shelving, workbenches, tables and desks with this larger scale pipe. Custom furniture that you design will impress your guests..
- Choose from our large selection of malleable cast iron fittings, nipples and connectors to create one of a kind, custom furnishings limited only by your imagination. Build DIY steampunk lamps, rustic shelves, a wood and steel bar, or industrial farmhouse and retro themed furniture. Mix black steel pipe with galvanized fittings to create truly unique looking pieces for your home, office, or business..
- Beauty and beast. Strength and style. You will know Pipe Décor parts and accessories when you hold them. This is real industrial pipe for custom furniture and lamps, or the original use of plumbing applications in gas, oil and air. Accept no substitutes. Additional pieces and accessories are available for your custom fixture projects and expansions. Plug and play as desired. Manufacturer part number 362 112x8-4..
- Because these are authentic parts, cleaning and sealing is required prior to use to prevent rust. Each pipe comes coated in a light industrial grease to prevent rust. For your convenience ....
Check Stock
