Categories

Best Alloy Steel Plate

Post Morten

  • LOW-MAINTENANCE ASHTRAY: Diminish the risk of an accidental fire with this low-maintenance 5-gallon outdoor ashtray.
  • PROTECTIVE STRUCTURE: Interlocking flame retardant polyethylene housing with protective aluminum alloy liner keeps out rain and airflow, extinguishes....
  • EXTRA STRONG AND DURABLE: Broad 2-piece neck design adds extra strength and stability.
  • EXCLUSIVE STAINLESS STEEL PLATE: Exclusive stainless steel ash plate maintains a fresh and clean appearance.
  • FEATURES RESTRICTED OPENING: Restricted opening keeps out non-cigarette waste and allows a safe spot to extinguish butt.
Check Stock

Industrial Strength Steel Hand Truck with Curved Handle & Stair Climbers

  • √ Sturdy and Durable - Thick aluminium alloy base plate and built-in steel pipe framework make the hand truck more solid and durable. With 6 heavy-duty Stair Climbing Rubber Wheels, this Stair Climbing hand truck rolling smoothly even on uneven surface..
  • √ Heavy Duty - Our aluminum alloy dolly cart can hold up to 176lbs capacity, big base plate design with bungee cord, helps you secures the loads to the hand truck..
  • √ Height Adjustable - The telescoping handle height can adjust from 25" to 40.5.
Check Stock

Onwon Stainless Steel Rust Resistant License Plate Frame Bolt Screws Fasteners with Corrosion Resistant Zinc Metal Safety Screw Caps Set of 4

  • License plate frame screws fasteners are made from stainless steel, durable and rust-free.
  • The screw caps are made of zinc alloy, corrosion resistant.
  • Note: the products' surfaces may not be particularly smooth, please note this before buying.
  • Anti theft license plate buckle protect your license plate, once the screw caps push into, hardly pull out.
  • The screw we provide should fit most of the vehicle if is not fit you shoud be able to use back your stock screw and still be able to install with our base and face cap..
  • Package includes: 4 * stainless steel screws.
  • 4 * zinc Anti theft license plate buckles.
Check Stock

osemar Jack Plates for Outboard Motor 4'' Set Back Adjustable for Boat Steering System

  • Jack Plate gives you a maximum height of 5.500 inches to lift your long axle engine and make it work on short axle beam boats!.
  • Jack plate Weighs 24 lbs.225 Maximum Horsepower, 4 inches of adjustable vertical movement..
  • Jack plate for outboard is made of high strength polished Aircraft Quality Aluminum alloy..
  • Outboard Jack Plate adjusts easily by turning one steel bolt, Professional installation is highly recommended..
  • Package Include:1 x Adjustable Outboard Boat Jack Plate..
Check Stock

Aootf Stainless Steel License Plate Frames- Heavy Duty Polish Mirror Car Tag Cover with Chrome Screw Caps, 2 Hole 2 Pack Front & Rear Holders for Women/Men, Tire Valve Caps, Rattle Proof Pads

  • ...ugh for the 2-hole license plate cover..
  • Rattle Proof License Plate- The large black foam License Plate Pad is pasted on the back of the license plate, which can effectively reduce license plate noise and avoid scratches and rust on the paint. High value car accessories- 4 set Valve Stem Caps, are made from aluminum alloy. Tire valve caps provide an enhanced seal to avoid leakage and properly keep away from dust, dirt, grime and road debris. Designed in general size, 10*16mm , can be installed on many tires or wheel air valve stems.
  • Durability & After Sale- License Plate Stainless Steel Frame are protected against Weather Changes and will stand Car Washes and Rain. If the size of the screws are not suitable for your car license plate mount, please contact us, we will send you the appropriate replacement.
Check Stock

BESTOOL Jack Plates for Outboard Motor 4'' Set Back Adjustable for Boat Steering System, Boat Jack Plat for Outboard Motors

  • BESTOOL jack plate gives you a maximum height of 5.5 inches to lift your long axle engine and make it work on short axle beam boats!.
  • Jack plate Weighs 24 lbs.225 Maximum Horsepower, 4 inches of adjustable vertical movement.Jack plates are the perfect solution for long shaft engines with a short shaft transom..
  • Adjusts easily by turning one steel bolt, offers 4 inches of adjustable vertical movement. Quick installation,easy slip-on. Replace your original damaged or rusted one..
  • Jack plate for outboard is made of high strength polished Aircraft Quality Aluminum.With a convenient one piece design made of aluminum alloy and stainless steel fasteners for maximum corrosion resistance and durable..
  • Outboard Jack Plate adjusts easily by turning one steel bolt, Professional installation is highly recommended..
Check Stock

Spinning Fishing Reel, 13+1BB Ultralight Saltwater Spinning Reel, Ultra Smooth Powerful Surf Fishing Reel, 5.2:1/4.7:1 Gear Ratio Waterproof and Rustproof Large db Spinning Reel

  • 【Waterproof Design】The spinning reel uses high-quality silicone waterproof rings at 6 key positions, which are rustproof and corrosion-resistant, significantly extended service life. saltwater and freshwater are both applicable..
  • 【13+1 Precision Bearings】stainless steel sealed bearing of surf spinning reel, combined with precision machined zinc alloy tooth plate and brass tooth bar,super smooth and strong with a fine drag to pull in big fish..
  • 【Special Sound System】spinning reel built-in large-scale metal sound plate, the Alarm will be louder and crisper than the regular sound plate when the line is ejected..
  • Screw-in Rocker Arm】The handle of the fishing reel is made of CNC stainless steel. The screw-in rocker arm is closely connected with the gear plate without clearance, making the equipment more solid and durable..
  • 【Unique Design】The machined and anodized aluminum alloy spools increase chamfer design to reduce the friction of the fishing line and cast farther. The anti-skid groove design can effectively prevent the fishing line from slipping.The novel hollow out design makes spinning reel very delicate and beautiful..
Check Stock

Spinning Fishing Reel, 13+1BB Ultralight Saltwater Spinning Reel, Ultra Smooth Powerful Surf Fishing Reel, 5.2:1/4.7:1 Gear Ratio Waterproof and Rustproof Large db Spinning Reel

  • 【Waterproof Design】The spinning reel uses high-quality silicone waterproof rings at 6 key positions, which are rustproof and corrosion-resistant, significantly extended service life. saltwater and freshwater are both applicable..
  • 【13+1 Precision Bearings】stainless steel sealed bearing of surfing spinning reel, combined with precision machined zinc alloy tooth plate and brass tooth bar,super smooth and strong with a fine drag to pull in big fish..
  • 【Special Sound System】spinning reel built-in large-scale metal sound plate, the Alarm will be louder and crisper than the regular sound plate when the line is ejected..
  • Screw-in Rocker Arm】The handle of the fishing reel is made of CNC stainless steel. The screw-in rocker arm is closely connected with the gear plate without clearance, making the equipment more solid and durable..
  • 【Unique Design】The machined and anodized aluminum alloy spools increase chamfer design to reduce the friction of the fishing line and cast farther. The anti-skid groove design can effectively prevent the fishing line from slipping.The novel hollow out design makes spinning reel very delicate and beautiful..
Check Stock

Spinning Fishing Reel, 13+1BB Ultralight Saltwater Spinning Reel, Ultra Smooth Powerful Surf Fishing Reel, 5.2:1/4.7:1 Gear Ratio Waterproof and Rustproof Large db Spinning Reel

  • 【Waterproof Design】The spinning reel uses high-quality silicone waterproof rings at 6 key positions, which are rustproof and corrosion-resistant, significantly extended service life. saltwater and freshwater are both applicable..
  • 【13+1 Precision Bearings】stainless steel sealed bearing of surfing spinning reel, combined with precision machined zinc alloy tooth plate and brass tooth bar,super smooth and strong with a fine drag to pull in big fish..
  • 【Special Sound System】spinning reel built-in large-scale metal sound plate, the Alarm will be louder and crisper than the regular sound plate when the line is ejected..
  • Screw-in Rocker Arm】The handle of the fishing reel is made of CNC stainless steel. The screw-in rocker arm is closely connected with the gear plate without clearance, making the equipment more solid and durable..
  • 【Unique Design】The machined and anodized aluminum alloy spools increase chamfer design to reduce the friction of the fishing line and cast farther. The anti-skid groove design can effectively prevent the fishing line from slipping.The novel hollow out design makes spinning reel very delicate and beautiful..
Check Stock

Black Outdoor Ashtray, 1-1/2 Gallon

  • LOW-MAINTENANCE ASHTRAY: Diminish the risk of an accidental fire with this low-maintenance 5-gallon outdoor ashtray.
  • PROTECTIVE STRUCTURE: Interlocking flame retardant polyethylene housing with protective aluminum alloy liner keeps out rain and airflow, extinguishes butts, and fight odor.
  • EXTRA STRONG AND DURABLE: Broad 2-piece neck design adds extra strength and stability.
  • EXCLUSIVE STAINLESS STEEL PLATE: Exclusive stainless steel ash plate maintains a fresh and clean appearance.
  • FEATURES RESTRICTED OPENING: Restricted opening keeps out non-cigarette waste and allows a safe spot to extinguish butt.
Check Stock

2023 New Electric Drill Plate Cutting Machine, Electric Drill Shear Machine, Metal Punching Drill Bit Attachment With Adapter, Cutting Metal Of Iron, Steel, Copper, Aluminum

  • [Powerful Cutting Ability] This metal punching drill attachment has a faster cutting speed than other sheet metal cutting tools, suitable for any drill bit working between 1500-3000, easier and more powerful than ordinary scissors and knives, Can save a lot of working time and improve efficiency..
  • [Electric drill plate knife accessories] High hardness cutting head, this puncher accessory can handle iron plate (0.2-1mm), white plate (0.3-1mm), steel plate (0.2-0.8mm), copper plate (0.3-1.2mm), Aluminum plate (0.3-1.2mm)..
  • [Easy to Use]: This metal cutter attachment quickly turns your drill bit into electric scissors that fit your drill chuck perfectly. And it also comes with an adapter handle, which can be adapted to a variety of different electric drills. This drill is compact enough to fit in your toolbox or locker for easy portability..
  • 【Accurate and Precise】- Features a positioning slot for accurate sizing to complete a wide range of metal pieces such as iron..
  • 【Precautions】It is not recommended to cut stainless steel and special high-hardness alloy materials, otherwise the machine will be damaged. If stainless steel must be cut, the thickness of the stainless steel must not exceed 0.5mm. And this bit is not good for cutting plastic.
Check Stock

New Metal Nibbler Drill Attachment, Electric Sheet Metal Cutter, Electric Drill Plate Cutter, Electric Drill Shears Attachment Cutter Nibbler

  • ...et(0.3-1.2mm), aluminum sheet(0.3-1.2mm)..
  • 【Wide Compatibility】The Electric Drill Shears has a wide range of application and is compatible with most of the hand drills, lithium drills and impact drills in the market. It can be used to cut all kinds of metal plates, such as aluminum, steel, iron, copper and other alloy materials..
  • 【Warm Remind】 We do not recommend cutting stainless steel and special high hardness alloy material, otherwise it will damage the machine. If stainless steel must be cut, the thickness of stainless steel must not exceed 0.5 mm..
  • 【Package Contents】 The package includes 1 electric drill plate cutter (drill not included), 1 large wrench, 1 small angle wrench, 1 L-shaped wrench and 1 instruction manual. The blade is very sharp, so please be careful when using it..
Check Stock

BEAMNOVA 2 Ton 4400 lbs Vertical Plate Lifting Clamp Sheet Metal Lifting Clamp Metal Steel Plate Lifting Clamps Lifters Heavy Duty

  • HEAVY-DUTY MATERIAL - BEAMNOVA plate lifting clamp is made of high-quality durable alloy steel with anti-rust coating for surface protection, which can withstand the harsh environment and last for long service life..
  • 4400LBS CAPACITY & FLEXIBLE CLAMPING - BEAMNOVA industrial lifting clamp has a large load capacity of up to 2 tons (4409lbs), with an opening range from 0 to 25mm (1”)..
  • EASY TO USE - Just pull the ring to open the fixture, loosen the jaw by the hook, clamp the steel plate into the opening, and then pull back the spring to lock..
  • SAFE – With a powerful clamping jaw, the vertical clamp can lock tightly the steel plates of varying thickness. Features a safety spring mechanism that ensures the clamp does not slip when lifting or lowering a load..
  • WIDE APPLICATION - Used to lift and transport steel plates and structures from any position (horizontal, vertical, and lateral). It is suitable for heavy lifting or transportation of steel plates and metal sheets. Widely applicable for steel structure installation, steel market, machine processing, steel plate welding, cutting, and handling..
Check Stock