Categories

Best Alloy Tube Pipe Fitting

nuwfrog Tubing and Pipe Cutter 3/16 to 2 Inch (5-50mm) with Extra Blade for Thin Stainless Steel Tube, Brass - Copper Pipe Tubing Cutter Set for Plumbing

  • 【Efficient and convenient】 The operation of cutting Thin Stainless Steel Tube, Brass - Copper Pipe Tubing from 3/16"-2" (5-50mm) O.D. becomes more easy, clean and efficient..
  • 【Versatile】This copper pipe cutter is suitable for use on construction sites, HVAC and refrigeration, plumbing jobs, manufacturing, heating, decorating or even at garage repair shops..
  • 【Fine workmanship】High-quality alloy steel grinding blades, extremely sharp.The body is made of lightweight,durable aluminum alloy casting..
  • 【Ergonomic design】Knob provides a firm grip. Cutting tubes become a comfortable and quick task..
  • 【EXTRA BLADE】Our pipe cutter also comes with an extra blade so you can cut as much steel tube as possible. We truly believe our Pipe Cutter is the best in the marketplace and we stand by that. If our tube cutter doesn’t cut it, we’ll FULLY REFUND YOU. So, click "Add to Cart" now and buy with confidence..
Check Stock

Beduan Brass Compression Fitting, Insert Tube Support Compression Sleeve Fitting 1/4\ Tube ID (Pack of 10)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

6505-08-08 Hydraulic Fitting 1/2\ Female JIC Swivel X 1/2\ Male Pipe Carbon Steel

  • 6505-08-08 HYDRAULIC FITTING 1/2" FEMALE JIC SWIVEL X 1/2" MALE PIPE (Tube O.D. / Hose I.D. Size).
  • THREAD SIZES FOR 6505-08-08 HYDRAULIC FITTING 3/4"-16 FEMALE JIC SWIVEL X 1/2" MALE PIPE.
  • THIS PART NUMBER IS OFTEN REVERSED IN THE INDUSTY. PLEASE VERIFY THE THREAD SIZES BEFORE PURCHASING.
  • TO MEASURE THREAD SIZE, CALIPERS WORK BEST.
Check Stock

Libraton Pex Cutter 1-1/4\

  • 【Premium Quality】Libraton PVC pipe cutter is made of durable hardness aluminum alloy steel. The thick blade used is of SK4 material with precision sharped..
  • 【Widely Application】The pex pipe cutter (cutting range: up to 1-1/4-inch or up to 31mm) is designed up to cut pipes of various plastic materials (PVC,CPVC,PP-R, PEX, PE, Rubber Hose etc.). The tube cutter (cutting range: 1/8inch to 7/8inch or 3-22mm) can be used to cut pipes made of aluminum and copper. It is an essential cutting tool set for your home handyman, plumbers, electricians, and vehicle mechanics..
  • 【Working with Safety】There is a safe lock in the bottom of pex cutting tool. You can buckle it when you don't use the cutter..
  • 【Reasonable Cutting Tool Composition】The PVC pipe cutting tool set includes three compositions, PVC pipe cutter x1, mini tube cutter x1 and PTFE seal tape x3, which can meet your various need when doing the pipe or tube cutting work..
  • 【Attension】This PEX cutter is suitable for most PEX pipes and thin PVC pipes. IT IS NOT SUITABLE FOR THICK PVC PIPES AND PVC PIPES WITH METAL LAYERS. Also, we offer a 12-month lifetime warranty. We have an after-sale service team here for you to ensure your 100% satisfaction..
Check Stock

Hilitchi 8Sizes Tube OD 4mm-16mm Brass Compression Sleeves Ferrules Compression Fitting Kit Metric 220Pcs

  • ...de of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅ [FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅ [APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubin....
Check Stock

Hilitchi 3Sizes Tube OD 1/4 5/16 3/8 Brass Compression Sleeves Ferrules Compression Fitting Kit (SAE, 105Pcs)

  • ...ade of brass, these compression sleeves ferules are lightweight material but good toughness, high strength, features corrosion resistance and wear resistancee, strong pressure resistance, they are also very easy to assemble. Good sealing performance, no leaks..
  • ✅[FERRULE DESIGN] It is very practical for the tubing fitting. Like cylindrical shaped, bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[HOW IT WORKS] Insert the tubing into the end of the fitting and then tighten it with the nut or screw and then forcing the ferrule into the fitting body. The ferrule design is very practical for the tubing. Like cylindrical shaped, it is bulging in the middle but two edges’s diameter are smaller than the belly part so that it could ensure the reliability of a compression seal..
  • ✅[APPLICATION] Since these brass compression fittings are good to create the most reliable seal, they can be see anywhere in systems from gas lines in refineries, to the plumbing under your sink, water heater in your home or a pipe transporting thing or your plumbing devices. They are used for fixed locking of copper pipe and hard pipe, PU tube, nylon tube or hard plastic tubing.....
Check Stock

EGSTAOR Bathroom Adjustable Wrench for Tight Spaces, 6-75mm Multifunction Aluminum Spanner for Plumbing Task Pipe Tube Nut Toilet Washbasin Sink Pool, 9-Inch (Silver)

  • ⚙ 3-IN-1 ADJUSTABLE WRENCH -- ✔ Wide aluminum adjustable spanner wrench.
  • ✔ The bottom of handle design for removing large convex cross screw.
  • ✔ 2 extra blades fixed on jaw by screw nuts to scrape away stains on smooth surface, or cut soft plastic pipe..
  • ⚙ LARGE OPENING FOR PLUMBING TASKS -- 6-75mm(0.25''-2.95'') wide jaw, adjusted quickly by smooth-going scroll wheel. Suitable for plumbing tasks in bathroom, toilet to tighten or disassemble sanitary ware, washbasin, pipe, plastic/brass nut, rounded fasteners..
  • ⚙ EASY TO USE -- Detachable long jaw can be reversible to use the flat side, or the arc side epiuped with teeth for clamping tightly round tube nut. 9'' long adjustable wrench fits for tight work space. The handle with square hole end, easy to grip and hang..
  • ⚙ ALUMINUM ALLOY WRENCH -- Made of lightweight aluminum alloy, reduces damage on ornamental pipe and tube nuts effectively, great for light duty works. Non-slip, rust/corrosion resistant after the surface treatment..
  • ⚙ WORRY-FREE PURCHASE -- We guarantee to provide 12 months after-sales service. Please note that our adjustable wrench is made of alumium alloy and designed for household pipe fittings, NOT for high torque jobs, or steel nuts/fasteners..
Check Stock

Beduan Reducer Tri Clamp Ferrule Stainless Steel 304 Sanitary Fitting 2\ Tube OD to 1-1/2\ Tube OD (Pack of 1)

  • Reducer sanitary fitting can be used to connect two pipes of different diameters that are along the same pipe axis..
  • High quality 304 stainless steel, having durable and long service life..
  • Tube OD: reducing 2" tube OD to 1.5" tube OD - (51mm to 38mm tube OD)..
  • Tri clamp size: reducing 2" Tri Clamp / Clover / Sanitary to 1.5" Tri Clamp / Clover / Sanitary - (64mm to 51mm Ferrule OD)..
  • Fitting clamps to tubing on both ends for a non-permanent seal, providing take-down access..
Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

  • 【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
  • 【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
  • 【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
  • 【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
  • 【ALL IN ONE SET】: Unique DOT Air Brake fit....
Check Stock

Bravex Tube Cutter 1/4\ to 2\

  • [High-quality Blade] This pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube. Cutting range is up to 2" (50mm)(OUTER DIAMETER)..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel blades. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes)..
  • [Cutting Efficiency] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [100% Money-Back Guarantee] If you're not satisfied, return back to us, no-hassle refund or product replacement..
Check Stock

Libraton Tube Cutter, Mini Tubing Cutter, Heavy-duty Pipe Cutter with Deburring Tool for Copper Pipe, Aluminum Pipe, Thin Stainless Steel Pipe

  • [High-quality Blade] Libraton pipe cutter blade is made form aluminum alloy, wear-resistant. It will never get rust..
  • [Wide Application] The copper tube cutter can be used to cut copper pipe, aluminum pipe and thin stainless steel tube..
  • [Mini Cutter] The mini tube cutter is specially designed for small diameter tubes in restricted spaces, and is perfect for working in tight and confined spaces, such as air conditioner installation and vehicle repair..
  • [Copper Tube Cutter] Solid ergonomic PVC knob is designed on the bottom of the copper cutter, providing the stability when using the cutter and improving the cutting efficiency..
  • [Usable Attachment] There is a deburring tool attached with the pipe cutter tool, made of sturdy plastic construction and high-speed steel baldes. It can deliver quick, clean and easy inside diameter reaming of different tubes (e.g. copper, aluminum, PVC and stainless steel tubes).
Check Stock

2 Pcs Mini Steel Tube Cutter Tool, Mini Tubing Cutter Pipe Cutter Tube Cutter Tool of Diameter from 1/8 to 1-1/8 Inch (3-28 Mm), Tube Pipe Cutter for Copper Brass Aluminum, Thin Stainless Steel Tube

  • Mini Tubing and Pipe Cutter: our tubing cutter is especially designed to assist plumbers, electricians and mechanics.
  • It is made of heavy duty alloy steel, this tube cutter mainly use for cutting copper, brass, aluminum and thin steel pipes.
  • Tube pipe cutter makes clean and precise cuts.
  • Various Tube Cuts: this tubing cutters will efficiently cut copper, brass, aluminum, thin steel and PVC pipes with 1/8 to 1-1/8 inch (3-28 mm) outer diameter.
  • This mini tube cutter provides a fast way to do a clean cut.
  • Convenient and Powerful: our small pipe cutter fits nicely in restricted spaces.
  • The mini steel tube cutter tool features a strong yet lightweight slide and wheel housing and large knurled screw knob for easy control of cutting pressure.
  • Large knurled feed screw knob provides users with ultimate cutting pressure control to produce clean cuts.
  • Multifunctional Pipe Cutter: this tube cutter tool fits for use on construction sites, plumbing jobs, HVAC and refrigeration, heating, manufacturing, decorating or even at garage repair shops and so on.
  • Specifically designed for use in restricted spaces to make tight cutting jobs significantly easier and more manageable.
  • Easy to Operate: cutting thin stainless steel tubing has never been easier.
Check Stock

WISPAUSU HVAC 90 Degree Pipe Bender Set ST-R999 Ratcheting Pipe Tubing Bender Hand Tool with 1/4 to 7/8 Inch Pipe Bender Heads

  • WHY NEED IT -- The professional pipe bender kit can help you to bend the metal pipe easily, and the bending angle can reach 90 degrees. This pipe bender is powerful and has reverse pipe bending function. It is made of high-quality carbon steel and aluminum alloy, which is strong and durable. It is very helpful for your pipe bending work..
  • 7 PIPE BENDER HEADS -- Equipped with 7 sizes of pipe bender heads, suitable for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8", pipe benders The head can be replaced to meet more needs..
  • HIGH QUALITY -- The ergonomic thick handle design is comfortable and safe to use. It will not be injured or risky during work. It is very suitable for one-handed operation and will not be tired after long hours of work..
  • EASY TO USE -- Place the metal tube between the cross bar and the mandrel. Pull the ratchet handle and the pump rod until the required angle is reached, up to 90 degrees. Then press the release trigger above the lever to retract the mandrel and release the metal tube easily without causing damage to the tube..
  • WHAT YOU GET -- The tool kit includes 1PCS Pipe Bender, 7PCS Pipe Bender Heads, 2PCS Fixed Supports, 1PCS Deburring Tool and User Manual. All tools are stored in a plastic case, neatly placed to protect the tools an....
Check Stock