Categories

Best Alpine 100watt Class D Amps

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • (2) Alpine SPE-6090 6" x 9" 2 Way Pair Of Car Stereo Speakers Totaling 600 Watts. (1) Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring Installation Wire Kit (2) RCA's. 6" x 9" Type-E Coaxial 2-way Car Speakers. Polypropylene cone pearl mica injection. 3/4" Silk soft dome tweeter. Tweeter Magnet: Neodymium. Woofer Magnet: Ferrite. 4 ohms impedance. Square voice coil. Injection molded frame.
  • Peak Power Handling Per Pair: 600 watts. Peak Power Handling Each: 300 watts. RMS Power Handling Per Pair: 150 watts. RMS Power Handling Each: 75 watts. Frequency Response: 65-18,000 Hz. Sensitivity: 91 dB. Top-Mount Depth: 3". Mounting Diameter: 5-15/16" x 8-3/4". Features: Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover:....
Check Stock

Alpine X-A90V X-Series 5-Channel Power Density Amplifier

  • RMS Power Handling @ 2 Ohms: 100 Watts x 4 + 500 Watts x 1 RMS Power Handling @ 4 Ohms: 75 Watts x 4 + 300 Watts x 1.
  • Alpine ID Sound Quality, solving what’s missing in most car audio systems these days: great spatial imaging and depth of sound stage..
  • Remote Bass (RUX-KNOB or RUX-KNOB.2) Compatible.
Check Stock

Memphis Audio VIV900.5 75W x 4 + 500W x 1 Car Amplifier

  • Features: 5-channel car amplifier, 50 watts RMS x 4 + 300 watts RMS x 1 at 4 ohms / 100 watts RMS x 4 + 500 watts RMS x 1 at 2 ohms / 150 watts RMS x 2 bridged at 4 ohms + 500 watts RMS x 1 at 2 ohms, Class D amp technology.
  • Tuning Controls: front channels: Variable high- or low pass filter (10-5,000 Hz, 24 dB/octave).
  • Rear channels: Variable high-pass filter (10-500 Hz, 24 dB/octave) / Variable low-pass filter (50-5,000 Hz, 24 dB/octave) / Bandpass filter engages both.
  • Subwoofer channel: Variable subsonic filter (10-80 Hz, 24 dB/octave) / Variable low-pass filter (50-500 Hz, 24 dB/octave) / Variable bass boost (0-18 dB at 45 Hz).
  • Other Features: Optional wireless remote subwoofer level control available, Preamp inputs, Speaker-level inputs (require speaker wire to RCA adapters), Hinged magnetic cover plate conceals top-mounted controls, 7 color selectable LED logo, 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier, No onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line Fuse between the distribution block and this amplifier is.
Check Stock

Kicker 46CXA18001 CXA1800.1 1800 Watt RMS Mono Car Audio Amplifier Amp+Bass Knob

  • Package Includes: (1) Kicker 46CXA18001 CXA1800.1 1800 Watt RMS Mono Class D Car Audio Amplifier Amp. (1) Kicker 46CXARCT Remote Control For 46CX 45CXA Series Amplifiers Amps. KICKER 46CXA18001 CXA1800.1 1800 Watt RMS Mono Class D Car Audio Amplifier Amp. Efficient Class-D amplifier. Three-second turn-on/off delay to eliminate unwanted interference. Variable 12dB crossovers provides control to dial in perfect sound. KickEQ 6dB variable bass boost for those additional low frequencies.
  • 24dB subsonic filter for protection from potentially damaging frequencies. FIT+ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio. Accepts up to 40-volt input signal. Small footprint for easier installation. Compatible with CXARC Remote Bass Control. Vertical mounting hardware included for another unique look. Dimension (L x W x H): 18.25 inch x 9 inch x 4 inch. Weight: 9.55 lbs. Power Rating: .4 ohms: 900 watts x 1 chan.2 ohms: 1800 watts x 1 chan..
  • Full Factory Warranty. Lifetime Customer Service by Kicker product experts. Guaranteed legitimate and authentic merchandise.
Check Stock

ISDT K4 Lipo Battery Balance Charger Discharger 1-8S AC 400W DC 600Wx2 Smart Charger for Life Lilon LiPo LiHv/Pb/NiMH Battery Balance Charger

  • Total charge circuit power on AC power: 200 watts with power distribution.
  • Ac power distribution, channels A & C: 100 watts total, channels B & C: 100 watts total.
  • Charge Current: channels A & B: 0.1 - 10.0 Amps, channels C & D: 0.1 - 5.0 Amps.
Check Stock

Alpine PWE-S8 Slim Under-Seat 8" 120 Watt Powered Active Car Truck Subwoofer Bundle with Rockville RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA

  • (1)Alpine PWE-S8 Slim Under-Seat 8" 120 Watt Powered Active Car Truck Subwoofer Sub. (1) RockvilIe RWK10 10 Gauge Amp Installation Kit ANL Fuse Holder 100% Copper RCA. Features: Alpine PWE-S8 Slim Under-Seat 8" 120 Watt Powered Car Sub. Power Rating: 120 Watts RMS. Max Power Output: 240 Watts.
  • Powered subwoofer with cast metal enclosure. 8" woofer high-excursion cone. Built-in Class D amplifier. Frequency response: 32-150 Hz. Variable low-pass crossover (80-200 Hz). Variable phase control (0-180 degrees). Preamp- and speaker-level inputs. Dimensions: 13-1/2"W x 9"H x 3"D. Features:.
  • RockvilIe RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit. (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17' 10 Gauge Translucent Blue SuperFlex Power Cables. 17 18 Gauge Blue Remote Cable. 17 16 Gauge Clear Speaker Wire. 3' 10 Gauge Clear SuperFlex Ground Wire.
  • Gold Plated AGU Heat Resistant Fuse Holder. 40 Amp ATU Inline Fuse. 7 Split Tube Loom. Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets. Soft abrasion proof insulating jacket allows fo....
Check Stock

PIONEER 5CH AMP/100X4+600W/BASSBOOST REM

  • Rockville RXD-M0 1200 Watt / 600 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier with Optical Coupler Technology. CEA Compliant Power Ratings : (Rated at less than 1 % distortion).
  • 1 Ohm : 1200 Watts x 1 Channel . 2 Ohm : 800 Watts x 1 Channel. 4 Ohm : 600 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Studio-Grade Bipolar Output Stage Transistors ..
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter : 50Hz - 250Hz. Subsonic Filter : 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control..
  • 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power : < 0.05%. S / N Ratio : >100dB. Frequency Response : 10Hz - 500KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.5" x 1.8" x 12.5"..
Check Stock

ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Amp+Bass Knob

  • Package Includes: (1) ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D Amp. (1) ALPINE RUX-KNOB.2 Remote Control Bass Knob For....
  • Remote Bass (RUX-KNOB or RUX-KNOB.2) Compatible. Specifications: CTA-2006 Power Rating: 100W RMS x 4 + 500W x 1 (2.
  • Dual speaker terminals simplify the hookup of multiple speakers. Heavy duty aluminum alloy heat-sink. Input sensitivity: High level: .5 - 10V Low....
  • Variable high-pass filter: 50 - 400Hz, -24dB/octave. Variable low-pass filter: 50 - 400Hz, -24dB/octave. Subsonic filter: 8 - 40Hz. Variable Bass....
Check Stock

Rockville Rxd-m0 1200 Watt/600W RMS Mono Class D 1 Ohm Amplifier Car Audio Amp

  • Rockville RXD-M0 1200 Watt / 600 Watt RMS Mono Class D 1 Ohm Car Stereo Amplifier with Optical Coupler Technology. CEA Compliant Power Ratings : (Rated at less than 1 % distortion).
  • 1 Ohm : 1200 Watts x 1 Channel . 2 Ohm : 800 Watts x 1 Channel. 4 Ohm : 600 Watts x 1 Channel. High-Speed MOSFET Power Supply. Optical Coupler Class “D” Technology. Studio-Grade Bipolar Output Stage Transistors ..
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter : 50Hz - 250Hz. Subsonic Filter : 15Hz - 55Hz. Phase Control Switch. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer Control..
  • 8 Volt Preamp Circuitry. Status Mode LED Indicator. Minimum THD at Rated Power : < 0.05%. S / N Ratio : >100dB. Frequency Response : 10Hz - 500KHz. Damping Factor : > 200 @ 100Hz. 50 Amp Maxi Fuse. Dimensions : (W x H x L) 8.5" x 1.8" x 12.5"..
Check Stock

KICKER 48KMA3604 360 Watt 4-Channel Marine Amplifier Boat Amp KMA360.4

  • Rockville RXM-T2 2400w Peak/1200w Dyno-Certified RMS 2 Channel Class D Marine Amplifier. Full-Range Class D Amplifier Architecture. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 800 Watts (2 x 400 Watts) at 4 ohms and 1% THD+N. 1200 Watts (2 x 600 Watts) at 2 ohms 97dB. Damping Factor: > 200 @ 100Hz. 3 x 35 Amp Fuses. Dimensions: (W x H x L) 6.7" x 1.98" x 12.25".
Check Stock

Alpine SWT-12S4 1000 Watt 12 Car Audio Bass Tube Subwoofer Bundle with Amplifier and Amp Kit

  • Package Includes: (1) Alpine SWT-12S4 1000w 12" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. (1) RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 Channel Amplifier Car Stereo Amp. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. ALPINE SWT-12S4 1000w 12" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. Speaker System: Bass Reflex Type. 12 (30cm) High-Performance Subwoofer. Peak Power: 1000W. RMS Power: 300W. Overall Dimensions: 12.75" x 25.98".
  • Frequency Response 28 - 200Hz. Speaker Impedance: 4 Sensitivity: 92dB/W (1m). Stitched Alpine Logo. Included Installation Brackets and Belts. Heavy Duty Subwoofer Grill. RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N.
  • 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 W....
Check Stock

ALPINE SWT-S10 1200w 10" Car Subwoofer in Bass Tube Enclosure+Amplifier+Amp Kit

  • Package Includes: (1) Alpine SWT-S10 1200w 10" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. (1) RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 Channel Amplifier Car Stereo Amp. (1)RockvilIe RWK81 8 Gauge Complete Amp Installation Wire Kit with 100 % Copper RCA. ALPINE SWT-S10 1200w 10" Car Audio Subwoofer in Bass Tube Enclosure 4-Ohm Sub. Subwoofer Type: 10 (25CM) BASS REFLEX SUBWOOFER TUBE. Frequency response: 35 - 200 Hz. Power handling: 1200 Watts peak power and 250 Watts RMS power.
  • Design: Stitched Alpine Logo, Rubber surround and push-type insert terminals. Dimensions: 11.22" x 23.62". Enclosure Dimensions: 11.25"W x 23.65" D. RockvilIe RXA-T1 1500 Watt Peak/750w RMS 2 ChannelCar StereoAmplifier. CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD 1 x 370 Watts bridged @ 4 Ohms < 1% THD. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD.
  • 1 x 370 Watts bridged @ 4 Ohms < 1% THD. RMS Power Ratings 750 Watts (2 x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ....
Check Stock

JL Audio XD1000/1v2 Monoblock Class D 1000W Subwoofer Amplifier

  • 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms) variable low-pass filter (50-500 Hz, 12 or 24dB/octave) switchable subsonic filter (30 Hz, 24 dB/oct).
  • Class D amplifier design with NextD switching amp technology differential-balanced inputs eliminate noise coming from your vehicle's electrical system Advanced Rollback Protection System prevents thermal shut-down speaker- and preamp-level inputs (speaker-level input requires an.
  • preamp outputs auto turn-on via DC offset or signal sensing 4-gauge power and ground leads and a 80-amp fuse recommended — wiring and hardware not included with amplifier.
  • no onboard fuses — when installing multiple amps in a system, an additional 80-amp in-line fuse between the distribution block and the amplifier is recommended 14-3/4"W x 2"H x 7-1/8"D.
Check Stock