Best Alpine Remote Control

IMC Audio Remote Control Compatible with Alpine CDE-W235BT CDE-W265BT CVA-1014 ICS-X7HD IDA-X001 IDA-X100 IDA-X200 CDEW235BT CDEW265BT CVA1014 ICSX7HD IDAX001 IDAX100 IDAX200

  • This is replacement Remote Control for Alpine's RUE-4202 which has been discontinued by Alpine. Made by IMC Audio, this remote does not require programming or pairing. Add batteries to the remote and point and click..
  • This Remote is compatible with the following Alpine models:CDE-W235BT CDE-W265BT CVA-1014 ICS-X7HD IDA-X001 IDA-X100 IDA-X200 CDEW235BT CDEW265BT CVA1014 ICSX7HD IDAX001 IDAX100 IDAX200 . It is made to the same specs as the original remote.
  • Prior to shipping, we test each remote to ensure no defective remotes are sent from our facility. If the remote does not work, it is most likely a defective sensor on the actual alpine stereo. IMC Audio provides a 1 year manufacturers warranty on all remotes.
  • This is a infrared remote controller. It is tested in the factory it is produced in and again at our facility in California. Alpine has discontinued the original remote in hopes that people upgrade their stereos..
  • Each package contains 1 Remote Control. Batteries are not included. Upon adding 2 AAA batteries, it is point and click. No programming necessary. If there is an issue, we offer American tech support to troubleshoot issues..
Check Stock

ALPINE S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Class-D+Bass Knob

  • (1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D. (1) Alpine RUX-KNOB.2 Remote Control Bass Knob For Select Alpine Amplifiers Amps. Specifications:.
  • Alpines Class D Amplifier Circuit. CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V 1% THD+N).
  • S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm). THD+N 0.03% (ref 1W info 4 ohm). Frequency Response: 10Hz-400Hz (+/-3 dB). Damping Factor: > 1000.
  • Remote bass knob compatible (requires RUX-KNOB.2, sold separately).
Check Stock

ALPINE UTE-73BT Digital Media Bluetooth Car Stereo Receiver w/USB+AUX Cable

  • ALPINE UTE-73BT Digital Media Bluetooth Car Stereo Receiver w/USB+Absolute AUX Cable.
  • Single DIN In-Dash Bluetooth Digital Media Receiver, Digital LED Backlit Display, Power Output: Peak: 50 watts x 4 channel, RMS: 18 watts x 4 channel, Bluetooth hands-free calling and audio streaming Wireless remote control Alpine RUE-4360 sold separately Detachable Faceplate Siri Eyes Free Control.
Check Stock

ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Amp+Bass Knob

  • Package Includes: (1) ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D Amp. (1) ALPINE RUX-KNOB.2 Remote Control Bass Knob For....
  • Remote Bass (RUX-KNOB or RUX-KNOB.2) Compatible. Specifications: CTA-2006 Power Rating: 100W RMS x 4 + 500W x 1 (2.
  • Dual speaker terminals simplify the hookup of multiple speakers. Heavy duty aluminum alloy heat-sink. Input sensitivity: High level: .5 - 10V Low....
  • Variable high-pass filter: 50 - 400Hz, -24dB/octave. Variable low-pass filter: 50 - 400Hz, -24dB/octave. Subsonic filter: 8 - 40Hz. Variable Bass....
Check Stock

Alpine RUX-KNOB Remote Bass Level Control Knob for PDX-M12 and PDX-M6

  • Plugs directly in for quick direct subwoofer control.
  • Remote level controller for Alpine PDX and MRX Series amplifiers.
  • Easily adjust the bass gain of your amp while seated inside.
Check Stock

CT Sounds CT-3200-1D Class D Car Audio Monoblock Amplifier, 3200 Watts RMS

  • Xtenzi Brand Remote Amplifier Level Controller Optional bass remote XTBR25-91579.
  • Optional Wired Remote Volume Control Compatible with Select Alpine Series Amplifiers.
  • Controls the bass/gain from the front seat or remote location from amplifiers, without having to reach for the amplifier..
  • Allows You to Adjust Your Bass Level Quickly and in the Most Ideal Location, Simple 1-wire connection gets you up and running in a flash..
  • High Quality Product Remote Unit Comes with 5-meter/16 Feet/196-inch remote connection wire and bass knob and mounting Screws.
Check Stock

Alpine ILX-F511 Halo11 11" Multimedia Touchscreen Receiver with Halo Wireless Volume knob and subwoofer Level Controller

  • Bundle Includes: Alpine ILX-F511 Halo11 Multimedia Receiver w/ 11" Touchscreen Display, Alpine RUX-H02 Next-Gen Remote Bass Knob, Creative Audio Coozy, 4-piece set of Plastic Pry Tools.
  • The iLX-F511 Works with Apple CarPlay and lets iPhone users make and receive calls, access text messages, play music, and get directions in a way that allows them to stay focused on the road..
  • The iLX-F511 includes Android Auto and works with the Google Assistant. Google Assistant allows users to play their favorite music, get driving directions to their destination, and reply to text messages – hands-free..
  • The Alpine Halo11 has on-board tuning features including a 13-band parametric EQ per channel, for continuous frequency control..
  • The screen is attached to an adjustable mount on a single-DIN chassis that’s designed to fit in most dash openings..
Check Stock

4 Alpine SPE-6090 6x9 600 Watt Car Audio Speakers+4 Channel Amplifier+Amp Kit

  • ...1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Terminal Layout: Two-Sided. Screw Mount / Wire Cover: Integrated Wire and Mounting Screw Terminals.
  • Alpine BBX-F1200 600 Watt 4/3/2 Channel Amplifier Car Stereo Amp Class-A/B 2-ohm. Amplifier Type: Class-A/B. Channel Design: 4/3/2 Channel. Thermal Control: Thermal Management Control. Power Supply: DC-DC PWM Power Supply. Power Supply Design: MOSFET Power. Current Protection: Over-Current, Over-Voltage and Thermal Protection. Crossover: Variable Low-Pass / High-Pass. Green/red status LED. 2 pair RCA pre-inputs. Max Power Output Ratings. Total Max Power: 600W. RMS Power Ratings.
  • Per Channel into 4ohms (%THD+N): 4 x 50W. Per Channel into 2ohms (%THD+N): 4 x 70W. Bridged into 4ohms (%THD+N): 2 x 130W. Sound Tuning. Crossover Frequency (Variable, OFF/LPF/HPF Selectable). 1/2 Ch: LP/HP: 50Hz 500Hz. 3/4 Ch: LP/HP: 50Hz 500Hz. EQ (Equalizer): Bass EQ Fixed Frequency 45 Hz, Q=0.5, Variable Gain 0dB to +12dB (3/4 Ch only). Dimensions. 12.99" x 2.04" x 9.44". General. Power Requirements: 14.4 V DC (11 V to 16 V). Input Sensitivity: 0.2 - 8.0 V.
  • Frequency Response: 5 Hz - 50 kHz (+ 0,-3 dB). Speaker Impedance: 4 or 2 Signal to Noise: S/N Ratio (IHF A Weighted, Reference: rated power into 4ohms) 9....
Check Stock

Alpine Halo Remote Bass Knob

  • Remote Bass Knob for the Alpine Halo Display.
  • Fits the iLX-F259, iLX-F309, and iLX-F411 9-inch and 11-inch screen.
  • Compatible with the X-A90M, X-A90V, R-A90S, R-A75M, R-A60M, S-A55V, PDX-V9, KTA-200M.
  • Also compatible with the X-A70F, R-A60F, S-A32F in 3-channel mode for level control on channel 3 or 4 when bridged.
Check Stock

2) Alpine SWT-10S4 10" 350W RMS Shallow Slim Truck Car Subwoofers Subs+Amplifier

  • Package Includes: (2) Alpine SWT-10S4 10" 1000W Peak/350W RMS Shallow Slim Truck Car Subwoofer Sub, (1) Alpine S-A60M 600 Watt RMS Mono Car Audio Amplifier Subwoofer Amp Class-D, (1) RockvilIe RWK41 4 Gauge Complete Car Amp Wiring Installation Wire Kit with RCA's.
  • Features of Alpine Subs: Alpine SWT-10S4 10" 1000 Watt Shallow Mount/Truck/Car Subwoofer, Power Rating: 1000 Watts Peak/ 350 Watts RMS, Kevlar Reinforced Pulp Cone, Polyurethane Foam Surround, Recessed pole port for better airflow, Side Cooling Air vents- allows better cooling even with small enclosures, Impedance: 4-Ohms, X-MAX/Excursion: 11MM, Frequency response: 30 Hz 200 Hz, Mounting Depth: 4.16" - Can be mounted in tight spaces like under or behind a seat for max installation flexibility.
  • Specifications of S-A60M: Alpines Class D Amplifier Circuit, CTA-2006-B Power Rating: 330W RMS x 1 (4ohm, 14.4V = 1% THD+N).
  • 600W RMS x 1 (2ohm, 14.4V = 1% THD+N), S/N ratio: >85dB (ref: 1W into 4 ohm), >105dB (ref: rated power into 4 ohm), THD+N = 0.03% (ref 1W info 4 ohm), Frequency Response: 10Hz-400Hz (+/-3 dB), Damping Factor: > 1000, Remote bass knob compatible (requires RUX-KNOB.2,....
Check Stock

OEM Alpine Microphone Originally For Alpine INEW967HD, INE-W967HD, CDE143BT, CDE-143BT, X008U, X208U

  • Alpine Remote Control CDA-D855 CDA-W550 CDE-141 CDE-143BT cdad855 cdaw550 cde141.
Check Stock

Alpine S-A55V Five Channel Car Digital Amplifier and RUX-KNOB.2 Driver s Seat Bass Gain Remote Controller Bundle

  • BUNDLE INCLUDES: S-A55V Amplifier, RUX-KNOB.2 Remote Controller, and Car Toys Keychain. Car Toys is an Alpine Authorized Retailer and full service....
  • Install the included RUX-KNOB.2 remote control knob in your vehicle cabin so you can easily adjust the bass gain of the amp while driving. Make bass....
  • AMPLIFIER: 40 watts RMS x 4 at 4 ohms + 300 watts RMS x 1 at 2 ohms.
  • AMPLIFIER: Bridged: 120W RMS x 2 (4ohm, 14.4V ≤ 1% THD+N).
  • AMPLIFIER S/N ratio: >83dB (CH1-5 [ref: 1W into 4 ohm]), >98dB (CH1-4)/104dB (CH5) (ref: rated power into 4 ohm).
Check Stock

Alpine S-DB8V-TRK Dual 8" Halo S-Series Preloaded Truck Subwoofer Enclosure S-A60M S-Series 600 Watt Mono Amp and RUX-KNOB.2 Bass Knob

  • Bundle includes: Alpine S-DB8V-TRK Dual 8” Alpine Halo S-Series Truck Subwoofer Enclosure, Alpine S-A60M Mono Digital Subwoofer Amplifier - 600 Watts x 1 @ 2-Ohms & 330 Watts x 1 @ 4-Ohms, Alpine RUX-KNOB.2 Remote Bass Knob.
  • S-DB8V-TRK - These enclosures were designed to fit under the back seat of most full-size trucks. Two 8” subwoofers are preloaded into the compact enclosure and linked with a ProLink bracket that can be adjusted from 40” to 51” for a wide range of applications..
  • S-DB8V-TRK - Integrated Amp Tray – Centered on the enclosures is an integrated amplifier mount tray that’s optimized for Alpine Mono-Power Amplifiers (sold separately)..
  • S-A60M - Power output 2-Ohm @ 14.4 Volts: 600 W RMS X 1, Power output 4-Ohm @ 14.4 Volts: 330 W RMS X 1.
Check Stock