Categories

Best Alternator Pulley Removal Tool Kit

Harmonic Damper Pulley Holding Tool & Crankshaft Pulley Holder for Toyota Tacoma Nissan Camry etc.

  • APPLICATION: Harmonic Damper Pulley Tool holds the pulley stationary for the center bolt to be removed without an impact, great for timing belt replacement.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on Toyota timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12 - Month Warranty.
Check Stock

Harmonic Damper Pulley Holding Tool Crank Removal Wrench Tool & Crankshaft Pulley Holder for Lexus Toyota Nissan etc.

  • ...istant to cracking, abrasion, rust and damage due to chemical exposure.
  • APPLICATION:  Harmonic Damper Pulley Tool helps to remove and install the crank bolt on Lexus and Toyota engines.
  • Cam Holding Tool is great for timing belt changes, cam seal replacement, cam gear removal, camshaft pulleys installation etc..
  • A MUST-HAVE TOOL KIT: Harmonic damper pulley tool saves your time for the work on toyota / lexus timing belts or to remove the crankshaft pulley.
  • Crankshaft Pulley Holder holds the pulley to stop it from spinning while tightening/loosening the bolt.
  • SATISFACTION GUARANTEE: If you're not 100% satisfied with Sunluway Cam Pulley Holders, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
Check Stock

ICT Billet Corvette LS Alternator & Power Steering Pump Bracket Accessory Kit Turbo LS1 551521X-1

  • Made In Wichita, Kansas From Aerospace Grade, USA Billet Aluminum.
  • This Kit Requires The Use Of A Corvette Or (CTSV/G8/SS) Crank Pulley (12560115) ICT Billet (BAL100).
  • Compatible With Chevy Corvette G8 SS CTS-V Z06 LS1 LS2 LS3 LS6 LS7 L77 5.7L 6.0L 6.2L 7.0L Gen III IV (1997-2013) Series Engines.
  • Included in the package is the alternator, & power steering bracket, 1 smooth pulley, and all required mounting hardware..
  • This Kit Will Place The Alternator & Power Steering Pump In The Factory Corvette Location..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler

  • ...power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
  • the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
Check Stock

ATP 50mm Cranks Crankshaft Pulley Removal Wrench Holder Tool Remover and Installer Socket Wrench Removal Holding Spanner kit Compatible with Honda and Acura Engines

  • Premium Quality: The remover and installer socket wrench is designed with hardened chrome molybdenum steel construction, coated with black paint which prevention corrosion, heavy duty sturdy and durable..
  • Specifications: The 50mm crankshaft crank pulley wrench holder tool is of 2.2 inches by 5.8 inches by 5.9 inches, weight 1.3-pounds..
  • Hexagonal Shape Design: This crankshaft crank pulley removal tool is designed with a hexagonal shape with a hole in the center of the tool, that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Great Function: The 50mm cranks crankshaft pulley removal wrench holder tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt and prevent it from rotaing as you install or remove many Acura and Honda engine crank bolts..
  • Great Compayibility: This crankshaft crank pulley removal tool adopts small compact and center hollow design, the crankshaft pulley wrench gets into tight engine spaces easily when servicing the engine and powertrain, fits for most Honda and Acura engines..
Check Stock

Orion Motor Tech Power Steering Pump Pulley Puller/Installer Tool Set, Pump Pulley Remover Installer Tools Compatible with Ford, GM, and Chrysler Vehicles

  • ...power steering tools is constructed from structural-grade AISI 1045 medium carbon steel for the necessary strength to get your work done right.
  • each piece is also heat treated and blackened for even greater dependability and superior corrosion resistance to give you years of use.
  • WIDE COMPATIBILITY: This pulley pump removal kit is compatible with the Saginaw, Thompson, and Ford C111 C2 power steering pumps in most Ford, GM, and Chrysler vehicles and the belt-driven vacuum pumps and press-on water pump pulleys in GM’s V6 engines.
  • the two forcing screws also work with most VW vehicles’ power steering systems.
  • USER FRIENDLY: This power steering pump pulley installer and remover set is intuitive but also comes with clear instructions for easy step by step operation.
  • the custom blow-molded case keeps everything well organized and easy to store or carry between jobs.
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the water pump, remove bolts and reinstall over bar.
  • PACKAGE CONTENTS: 32mm and 36mm fan clutch removal tool set includes (2) standard size wrenches (32mm and 36mm spanner sizes) and (1) pulley bar.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • ... Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley tool can be perfectly adapted to the engine, worked exactly as the OEM tools, and we offer 12 month warranty, let you order no worry.
Check Stock

Big Block Chevy Pulley Kit 396 427 454 V-Belt - Long Water Pump

  • Chevy Big Block Pulley Kit, LWP, V-belt (396-427-454).
  • Made in the USA from 6061-T6 Billet Aluminum.
  • Designed for engines with Long Water Pump.
  • Give Your Engine the Strong American Made Pulleys that It Deserves!.
  • Includes single groove water pump, two groove crank, and single groove alternator pulley and cap.
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock

MAKOTOOLS Pulley Puller and Installer Kit, Power Steering Pump Remover Alternator AC Pulley Puller & Installer Set (MKT027)

  • AC Puller & Installer Set for alternator and power steering pulley, including the Quad 4. Fits Pulley shafts of 1-1/8″, 1-1/4″, 1-3/8″, 1-5/8″..
  • Manufactured from high-strength aluminum for extra durability and longevity..
  • Includes a blow molded carrying case with handle that provides safe storage, quick organization, and easy transportation..
  • Comes complete with adapters for unique style pulleys. Has reversible split jaws for easy access to pulley flanges without damaging pulley..
  • Installs & Removes pressed on alternator, power steering pump and other pulleys on late model GM & Chrysler engines as well as most other vehicles..
Check Stock