Categories

Best Alternator Terminal Blocks

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 25A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 25A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

MILAPEAK Terminal Block and Strip - 6 Sets 4/5/6 Positions 600V 15A Dual Row Wire Screw Terminal Strip Block with Cover + 400V 15A Pre-Insulated Terminals Barrier Strips Jumpers (Black & Red)

  • ★【Clean Installation】- How to clean up your cluttered wire connection? Our terminal strips greatly simplified and neatened up your install. The pressure washer style terminal accepts a bare wire and the jumpers allow signals or power to be distributed neatly. This way you can easily disconnect a wiring branch without taking down the entire system..
  • ★【Heavy Duty】- Our terminal strip block are well made sturdy and with quality and robust screws. You can crank down on these for a firm bite. These allowed you to connect each power wire very cleanly to each source (ground and ignition on). Great for compact wiring jobs..
  • ★【Protect Cover】- Our dual row terminal strip blocks that also include a clear cover to protect accidental touching of the terminal. It will be more safer when the terminals are protected by snap-in plastic "lids". Be careful when mounting these covers..
  • ★【Easy Install】- The terminal strip blocks are easy to install and held in place by two screw holes at either end of the terminal. Standard spade crimp type connectors work well and you have the option of of making individual connections or by using the whole barrier bar or part of it up to multiple connections to a single line. Once the connections have been made, cl....
Check Stock

NORJIN UK-2.5N DIN Rail Terminal Blocks Set, Including 20Pcs UK-2.5N 12 AWG Terminal Blocks + 4Pcs End Covers + 4Pcs End Brackets + 2Pcs Ground Blocks  + 2Pcs Fixed Bridge Jumpers ＆ Aluminum Rail

  • 【UK-2.5N DIN Rail Terminal Blocks Kit】Comes with 20pcs UK-2.5N 12 AWG terminal blocks, 2pcs ground blocks, 2pcs jumpers, 4pcs E/UK end brackets, 4pcs UK-2.5BG end covers and 1pcs 8" aluminum rail .
  • 【Terminal Blocks UK2.5B】Terminal Blocks UK2.5B is made of  nylon PA66 housing, alloy copper bodies and nickel-plated Screws. Rated voltage: 600V, IEC 690V. Rated current: 20A, IEC 32A.Flexible (AWG): 24-12. It can connect two conductors with ease and can be used on DIN Rail 35mm, steel or aluminum. .
  • 【8in Aluminum DIN Rail】Length : 203mm/ 8".
  •   Height : 7.5mm/ 0.3".   Thickness : 1.2mm/ 0.047".   Guide rails can be used to install circuit breakers, contactors, surge protectors, modular jacks, motor soft starters, PLC, relays, terminals and other electrical appliances. .
  • 【Ground Terminal Blocks Connectors】The grounding terminal blocks provide an easy-to-identify, convenient, neatly organized grounding bus that is mounted on the DIN rail. The protective terminal blocks has strong clamps to ensure tight fixation on DIN rails to achieve the PE function. .
  • 【Bridge, End Stopper Bracket, End Cover】The bridge can be insert at the top clamp space of UK terminal blocks, potential distribution can be contact quickl....
Check Stock

New Alternator Compatible with/Replacement for 3cyl 100ci 1.64L YANMAR 3JH4E 03-On LRA03783, 128271-77200, 10Clock 60Amp Internal Fan Type Solid Pulley Type Internal Regulator CW Rotation 12V

  • Specs: Alternator, Voltage: 12, Rotation: CW, Dimension: Replacement Unit:, Mtg. Ear 1 Hole: M8x1.25 Threaded, Mtg. Ear 2 Hole: 10.4mm Unthreaded, Mtg. Ear 3 Hole: 10.5mm Unthreaded, B+ Terminal: M6x1.00, IG Terminal: Spade, L Terminal: Spade, Amperage: 60, Clock: 10, Pulley Class: V1, Regulator: IR, Fan Type: IF, Brief: Yanmar 4JH3 Engines, 1-V PULLEY 74mm OD.
  • Replaces OEM Numbers: ARROWHEAD: AHI0151, HITACHI: LR160-741, J & N: 400-44045, J & N (OLD): 400-44045R, YANMAR: 128271-77200.
  • Compatible With/Replacement For: YANMAR 2YM15 All, 3JH3E All, 3JH4E All, 3YM20 All, 3YM30 All, 4JH3-CE 1994-2003, 4JH3-TCE 1994-2003, 4JH3E 1994-2003.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
  • 100% New Aftermarket Alternator built to meet OEM specifications.
Check Stock

Rareelectrical NEW 24V ALTERNATOR COMPATIBLE WITH CATERPILLAR MARINE ENGINE 3208 3304 3306 3N2706 3T6352

  • Compatible with AC DELCO, ALLIS CHALMERS, CAT, CATERPILLAR, DELCO and many more... Please verify your OEM part number from your original unit to help ensure fitment..
  • Replaces: AC DELCO: 321-665 321665, CATERPILLAR: 0R2698 0R5217 3N2702 3N2706 3T6352, ITEM DESCRIPTION: ALTERNATOR, UNIT TYPE: DELCO, VOLTAGE: 24, AMPERAGE: 45, FAN: EXTERNAL, REGULATOR: INTERNAL, POLARITY: NEGATIVE, B+ TERMINAL: 1/4-28, WEIGHT: 16.715 LBS / 7.6 KG ....
  • Computer tested for consistent Quality and unsurpassed reliability.
  • Alternator - Voltage: 24V Amperage: 45 Amps Regulator: Internal Source: Aftermarket.
Check Stock

Taylor Cable 48020 Single Trunk Mount Battery Relocator Kit

  • Easy to Install: No alternator or ignition connection needed,You don't need any additional components to complete installation as everything is included in the kit, including leads, connectors, screws, zip ties, and more..
  • Voltage Sensitive Relay: DEWINNER Automatic 140 Amp Dual Battery Isolator is all you need to charge Two Battery Systems. Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to start your vehicle. It's like having two separate power sources for each battery while only having one alternator!.
  • Fits a Wide Variety of Vehicles: Like Having Two Separate Power Sources,The Dual Battery Isolator Kit Enables Your Accessories to Run From a Separate Battery While the engine is not running on your vehicle While keeping your Main Battery Charged and Your Vehicle Always Ready to Go and Start When You Want It. Suitable for 12V 4WD, marine, truck, caravan & camping applications.
  • What You Get: 140 Amp Voltage Display Battery Isolator.
  • 2×positive brass marine battery terminals.
  • 1× negative brass marine battery terminal.
  • 3×copper crimp lugs &2× Red heat shrink.
Check Stock

ECCPP Alternators 11390 Fit for Accord 2008 2009 2010 2011 2012 TSX 2009 2010 2011 2012 2013 2014

  • COMPABILITY WITH - Alternator for TSX L4_2.4L 2354cc 2009-2014, TSX L4_2.4L 2354cc 144cid 2011-2013, For Accord L4_2.4L 2354cc 2008-2012, For Accord L4_2.4L 2354cc 144cid 2008-2012.
  • REPLACeMENT - 104210-5890, 06311-R50-505RM, 31100-R40-A01, 31100-R40-A01RM, CSF89, 13-9444, 11390.
  • SPECIFICATION - 130 Amp/12 Volt, CW, 7-Groove Pulley ,DENSO IR/IF.
  • BENIFIT - Alternators with longer life,resist heat and moisture, protect alternators from excessive charging or failure due to shorts in your cars wiring that can cause spikes or open circuits.
  • CYCLING TEST - New Alternator high Output are computer tested for voltage stability, terminal function, and electronic circuit board integrity.
Check Stock

Glarks 124Pcs(8Sets) Terminal Block Set, 8Pcs 3 4 5 6 7 8 10 12 Positions 600V 15A Dual Row Screw Terminals Strip + 16Pcs Pre-Insulated Barrier Strips + 100Pcs Insulated Fork Wire Connector

  • ★【What You Get:】In this terminal block set, it include 8pcs 3 4 5 6 7 8 10 12 positions double row screw terminal strip blocks with cover, 16pcs black and red pre-insulated barrier jumper strips, 100pcs insulated fork wire connectors. Total 124pcs are well packed in a box..
  • ★【High Quality:】The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance (transparent dust cover is not flame retardant). High-quality brass guide, excellent electrical conductivity, the appearance of nickel-plated, rust and durable..
  • ★【Product Feature:】The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite.
  • Also include a clear cover to protect accidental touching of the terminal. Transparent cover, clear and intuitive internal components, allows for visual inspection of insert terminals..
  • ★【Easy to Install:】The terminal strips are easy to install and hold in place by two screw holes at either end of the terminal. One mounting hole each end for fixed mounting.The fork terminal stripe can be cut in any position to meet with your different demand. Come with 100pcs 22-16(red) /16-14 (blue) /12-10(yellow) fork spade wire connectors for easy wire c....
Check Stock

Alternators,ECCPP 11392 for Honda Accord 2008 2009 2010 2011 2012 Accord Crosstour 2010 3.5L

  • FITMENT - Alternator for Honda Accord 2008-2012 Accord Crosstour 2010 3.5L.
  • Brief:for HONDA ACCORD 3.5L w/MT 2011-12.
  • BENIFIT - Alternators with longer life,resist heat and moisture, protect alternators from excessive charging or failure due to shorts in your car's wiring that can cause spikes or open circuits.
  • CYCLING TEST - New Alternator high Output are computer tested for voltage stability, terminal function, and electronic circuit board integrity.
Check Stock

OONO 16 Amp 2x12 Position Terminal Block Distribution Module for AC DC

  • 16Amp 48V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • Rated current 16 Amp(total input or output), Maximum voltage 48V.
  • A / B terminal blocks, Pitch 7.5mm/0.295", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel, Cr3+ Zn....
  • A1~B6 / A7~B12 terminal blocks, Pitch 5.0mm/0.197", Wire range 26AWG ~ 12AWG / 2.5mm square. Rated current 16Amp. Strip length 7mm. Screws - M3,steel,....
  • UL CE CQC certified terminal blocks, FR-4 glass fiber PCB..
Check Stock

Terminal Block,2 Pack 8 Circuits 20-30A 200v-450v Dual Row Screw Terminals Strip +32 PCS Heat Shrink Wire Connectors

  • Practical Terminal Block Kit:How to clean up your cluttered wire connection?Our double row screw terminal strip block can help you to connect bare wires to avoid clutter, making wiring connection simpler and more efficient.This way you can easily disconnect a wiring branch without taking down the entire system..
  • Product Feature:The dual row terminal blocks are designed with screws, you can crank down on them for a firm bite.
  • We also provide thick copper heat shrink wire connectors to ensures strong secure crimping every time..
  • Heavy Duty:The terminal blocks are high quality flame retardant PC engineering materials, with excellent flame retardant and impact resistance. High-quality insulated fork wire connectors kit is thick copper,with safe and durable..
  • Easy Install:The terminal strips are easy to install and hold in place by two screw holes at either end of the terminal. One mounting hole each end for fixed mounting.The fork terminal stripe can be cut in any position to meet with your different demand..
  • Package Included:2 x 8 positions dual row terminal blocks set,32 pcs insulated fork wire connectors in a bag.Terminal Block rated voltage/current Universal : 20A-30A/200-450V.And 100% guaranteed,If you have any questions about the product, we support un....
Check Stock

Alternator Compatible With/Replacement For 8745 8765 Acgo Allis Tractor, Massey Ferguson Farm Tractor, Case Farm Tractor, Jcb Excavator, Jcb Lift Truck, Jcb Loader, Lister-Petters Tractor

  • Specs: Alternator, Voltage: 12, Rotation: CW, Dimension: Replacement 70A Unit:, Mtg. Ear Hole (1): M8-1.25 Threaded, Mtg. Ear Holes (2): 8.4mm Unthreaded, Mtg. Ear Thick (2): 11mm, Mtg. Ear Thick (1): 20mm, B+ Terminal: M6-1.0 w/Spade, W Terminal: M5-0.8, Amperage: 45, Pulley Class: 1V, Regulator: IR, Fan Type: EF.
  • Replaces OEM Numbers: AGCO: 3778763M94, 3812958M91, ARROWHEAD: ALU0010, ARROWHEAD (OEM): MG102, MG212, MG415, MG426, ARROWHEAD (OEM) (OLD): IA0301, IA0707, IA0728, IA0810, BOSCH REMAN EUROPE: 0-986-030-760, CARGO: 110770, 110968, 111355, 111362, CASE: 104020A1R, 92281C1, 92292C1, K306549, K311696, K311697, K311698, K956426, INTL HARVESTER: 92281C1, 92292C1, PRESTOLITE: 66021136, QUICKSILVER: 8M6007500, REMY LIGHT DUTY: 50503, 50504, 50505, SPAREX: S-35966, S-42281, UNIPOINT: ALT-4028.
  • Compatible With/Replacement For: PERKINS Various Models 1992-2006, Various Models All.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. But in a rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you, contact us for a replacement..
  • 100% New Aftermarket Alternator built to meet OEM specifi....
Check Stock

Eagle High Fits 7129-24V High AMP Alternator 24V NEW DELCO STYLE MARINE ALTERNATOR FITS 1-WIRE 100 Amp Generator

  • New Aftermarket Part (Not Rebuilt/Refurbished/Repurposed).
  • Specs: Alternator, Voltage: 24, Amps: 40, Mount Type: Spool, Regulator Clock: 12: 00, Fan Location: External, Regulator Location: Internal, B+ Terminal: M6x1.00, Polarity: Negative, Notes: 1-Wire System.
  • Replaces OEM Part Numbers: Delco: 1102916, J & N: 400-12049, Lester: 7129.
  • Please verify this is the right part number before ordering.
Check Stock