Categories

Best Aluminium Heatsink

M.2 NVMe Heatsink SSD Cooler for PS5 or Laptop PC Memory Cooling Fin-Red (2 Pack)

  • Size: 2.8 inch x 0.9 inch x 0.1inch (71 mm x22 mm x3 mm). Materials used: Aluminium.
  • Fit for PS5 M.2 PCIe SSD slot . Compatible with M.2 PCIe NVMe 3.0/4.0 SSD, such as Samsung 980/ 970 PRO, WD Black SN850....
  • Unique groove design: Greatly increased cooling area with a cooling effect of 5°C-20°C (varies depending on the environment)..
  • Thermal pad included: placed between M.2 SSD and M.2 heatsink to conduct heat from M.2 SSD to M.2 heatsink. Good thermal conductivity and insulation..
  • Packaging Content: heatsink x 2, silicone thermal pad x 2, silicone band x 4.
Check Stock

XSPC Razor Radeon Pro Duo Backplate

  • Backplate for AMD Radeon Pro Duo cards (Reference Designs Only).
  • Requires an XSPC Razor waterblock for installation (cannot be installed with the original heatsink).
Check Stock

EVGA mITX 92mm, Sleeve, Direct Touch 4 Heat Pipe, Intel Socket 1150/1155/1156 ACX CPU Cooler 100-FS-C901-KR

  • CPU Compatibility: Intel Socket 1150, 1155, 1156.
  • Fan Specs: 92 x 92 x 25mm size, PWM Fan Control, 800-2800RPM, 46.5CFM (Max).
  • Heatsink: Aluminium fins, 6mm Copper Heatpipes, Direct-touch base technology.
Check Stock

tatoko Aluminum Chipset Heatsink 100mm L x40mm W x20mm H Heat Sink Cooling Fin for High Power Amplifier Transistor Semiconductor 2PCS

  • Size : 100mm x 40mm x 20mm / 3.9" x 1.6" x 0.8"(L*W*H).
  • Widely used for computer, Power Transistor, Fet, IC, Power Amplifier, Voltage Regulator, Mosfet, Scr etc..
Check Stock

Cooler Master Hyper 212 EVO V2 CPU Cooling System - Better Performance, Upgraded Features - Offset Heat Sink, 4 Direct Contact Heat Pipes, 120mm SickleFlow V2 Fan - Redesigned Universal Socket Black

  • IMPROVED V2 PERFORMANCE - The Hyper 212 EVO V2 outperforms the legendary EVO with 10% lower temperatures across the board, while the new heat sink offers more system flexibility by taking up less space - it’s also quieter and easier to install/upgrade.
  • DIRECT COOLING WITH FINS - The primary heat exchanger features 4 embedded copper heat pipes (Ø6mm) in flat array and includes additional aluminium fins upon the plate to further augment thermal conductivity.
  • OFFSET ALUMINIUM HEATSINK - The stacked-fin array (with superior 212X vent cooling) has been offset slightly to reduce the overall height clearance from 159 to 155mm, and to free up space on the motherboard for high-profile RAM slots.
  • 120MM SICKLEFLOW V2 FAN - The latest SickleFlow V2 hybrid blades deliver ample air volume (62 CFM) with outstanding pressure (2.52 mmH2O) while producing less noise (8-27 dBA) - dual fans can be installed for a push/pull airflow configuration.
  • ALL-NEW UNIVERSAL BRACKET - The new socket kit (with mounting screws) is easier to install and supports the latest AMD & Intel CPU’s - accessories include MasterGel Pro thermal paste (8 W/m.k) and secondary fan mounting brackets (with splitter cable).
Check Stock

Easycargo 124pcs Heatsink Kit 9 Sizes Multicolor Aluminum Copper + 3M 8810 Thermal Conductive Adhesive Tape, Cooler Heat Sink Cooling VRM VRAM CPU GPU Small IC Laptop Raspberry Pi 4 SSD NVMe M.2 PS5

  • Universal Heatsink Assortment Box,124pcs Multicolor in 9 different size + Pre-applied 3M 8810 Thermal Conductive Adhesive Tape..
  • Variety Aluminum and Copper heat sinks for cooling raspberry pi 4, VRM VRAM RAM CPU GPU MOSFET Small IC Chips PC Components Laptop M2 M.2 SSD NVMe PS5.
  • Includes: 8pcs black anodized aluminum heatsink: 0.56 x 0.56 x 0.26 inch (14mm x 14mm x 7mm).
  • 8pcs green anodized aluminum heatsink: 0.56 x 0.56 x 0.30 inch (14mm x 14mm x 8mm).
  • 8pcs silvertone aluminum heatsink: 0.6 x 0.6 x 0.25 inch (15mm x 15mm x 6.5mm).
  • 8pcs silvertone aluminum heatsink: 0.56 x 0.56 x 0.21 inch (14mm x 14mm x 5.5mm) (L*W*H)..
  • Includes: 16pcs black anodized aluminum heatsink: 0.56 x 0.4 x 0.26 inch (14mm x 10mm x 7mm) (L*W*H).
  • 16pcs silvertone aluminum heatsink: 0.56 x 0.4 x 0.21 inch (14mm x 10mm x 5.5mm) (L*W*H)..
  • Includes: 20pcs black anodized aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs silvertone aluminum small heatsink: 0.35 x 0.35 x 0.19 inch (9mm x 9mm x 5mm).
  • 20pcs low profile copper pad shim heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)..
Check Stock

Dorhea for Raspberry Pi 4 B Metal Case, Armor Case with Dual Cooling Fan Aluminium Armour - Heatsink Case for Raspberry Pi 4, Radiation and Rust Protection for Raspberry Pi 4 B (Black)

  • Made of aluminum with good thermal conductivity. Stripe design and cooling fan allows for more efficient heat dissipation in less time..
  • Updated manufacturing process with improved CNC aluminium alloy quality. Not easy to rust..
  • Silence without noise with great cooling performance, it can drop temp up to 30-37 degree..
  • All ports and slots of the case can match with Raspberry Pi 4 Model B perfectly..
  • Comes with dual quiet cooling fan, built-in heatsink and thermal tape, which makes your Pi cooler than others..
Check Stock

Easycargo 10 Packs TO-220 Heatsink + Insulator/Mounting Kits for LM317 LM317t L7805 L7812 L78XX Voltage Regulator IRF Z44N 3205 520N 630 1404 MOSFET Transistor 20mm x 15mm x 11mm

  • 10 packs complete heat dissipation set for TO-220 power semiconductor packages.
  • 10 pcs black anodized aluminium TO-220 heat sink.
  • 10 pcs TO-220 insulation kits: Screw + Washer + Bushing and Insulator rubberized silicone.
  • Heatsink Size: 0.79x0.59x0.43" / 20x15x11mm.
  • Can be applied for cooling voltage regulators LM78XX, LM317, LM317t, IRF Z44N 3205 520N 630 1404, TDAXX etc.
Check Stock

Pastall 100 PCS (8 Different Sizes) Heatsink Kit with Conductive Adhesive Tape, Aluminum Heat Sink Cooler and Copper Heatsink for Raspberry Pi A B B+ 2/3/4

  • ❤ The 100 PCS (8 Different Sizes) heatsink kit with conductive adhesive tape, Easy to use and could effectively provide good heat dissipation..
  • ❤ As a Raspberry Pi heat sink (using as raspberry pi 4 heatsink/raspberry pi 3B+ heatsink), it has good heat dissipation performance and compatible with most Raspberry Pi cases..
  • ❤ The heat sink is equipped with high-performance thermal conductive adhesive, high viscosity, durable and long lasting..
  • ❤ This small heatsink kit included : 80 pcs aluminum heatsink + 20 pcs copper heatsink( It Contains 8 different sizes of heat sink,Please check the specific size on the picture)..
  • ❤ the heatsinks also could be used for Cooling Development Board Laptop CPU GPU VGA RAM VRAM VRM IC Chips LED MOSFET Transistor SCR Southbridge Northbridge Voltage Regulator.It is an excellent heat sink for heat dissipation in electronic DIY,You will love it!.
Check Stock

Intel i3/i5/i7 LGA115x CPU Heatsink and Fan E97379-003

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

SABRENT M.2 NVMe Heatsink for The PS5 Console (SB-PSHS)

  • DESIGNED FOR THE PS5 CONSOLE: Engineered to fit perfectly and easily into the PS5 console's SSD expansion slot for a quick and easy install..
  • REVOLUTIONARY COOLING: Made from High-Quality CNC'd aluminum, the Sabrent Heatsink for the PS5 console was specifically designed to maximize cooling performance and simplify installation..
  • UPGRADE YOUR CONSOLE! Rather than creating a heatsink that would only trap the heat in the metal cover, we designed a heatsink that replaces the native PS5 consoles cover. This allows for better cooling using the native fan as well as being a larger heatsink..
  • INDUSTRIAL QUALITY: This SSD heatsink method also uses Sabrent's "Sandwich Design" which ensures even pressure throughout the SSD for efficient and consistent heat transfer unlike methods used by other brands..
  • CONVENIENCE: Comes with an installation guide as well as screws and thermal tape for easy convenient installation..
Check Stock

GLOTRENDS M.2 Heatsink and Desktop PC Installation Fit for 2280 M.2 PCIe 4.0/3.0 NVMe SSD

  • M.2 heatsink cooler fits for Desktop PC installation. 0.4inch/10mm high m.2 heatsink..
  • Fit for all kinds of M.2 2280 SSD, including M.2 PCIe 4.0 SSD, PCIe 3.0 SSD, and PS5 M.2 SSD, such as WD Black SN850, Sabrent Rocket 4 Plus, Sabrent....
  • Unique dual installation solution: Metal clips + rubber bands for M.2 SSD installation. No need to worry about rubber bands material aging or SSD long....
  • 10°C- 30°C cooling effect (Varies depending on the environment) to keep your M.2 SSD under good performance even full-load operation. M.2 heatsink....
  • A thermal pad is included. To conduct heat from M.2 SSD to M.2 heatsink, the thermal pad is put between M.2 SSD and M.2 Heatsink. It is a low....
Check Stock

Geekworm 12mm Aluminum Alloy Heatsink (C235) Support 30mm Cooling Fan Compatible with Raspberry Pi Compute Module 4 CM4 Motherboard

  • ✔Geekworm design 12mm aluminum alloy heatsink for Raspberry Pi Compute Module 4 CM4.
  • User manual, refer to Geekworm WiKi search C235..
  • ✔Heatsink dimensions: 54x39x12mm/2.12x1.53x0.47inch.
  • ✔Support install 30mm (3007 or 3010) cooling fan above the heatsink for better heat dissaption.
  • ✔With one piece thermal pad, need to cut proper thermal pad to attach on the CPU of Raspberry Pi Compute Module 4.
  • ✔The C235 heatsink reserve the space to connect the extermal antenna for CM4. ✔The inclcuded PM2.5x16mm screws length is just for install CM4 module and C235 heatsink, no support CM4 IO board..
Check Stock