Categories

Best Aluminium Pulley

Bluemoona Plastic Gears Kits Pulley Belt Shaft Robot Motor Set Worm Crown DIY Car Toy 34Kinds

  • Used widely in milling machine, CNC engine lathe, gear shaper, hobbing machine, drilling machine or other machinery transmission occassions..
  • Multiple specifications: Diameters from 30 mm to 120 mm.
  • There is about 30-40pcs of Pulley Belts. Use for DIY Toys Module Car..
Check Stock

REGA Planar 1 Plus Turntable with Premounted Carbon MM Cartridge (Matte Black)

  • Built-in phono stage is a high specification pre-amp designed to allow simple connection to a wide variety of products.
  • 23 mm high mass phenolic platter with improved flywheel effect for improved speed stability.
  • Precision brass main bearing offers improved fit and removes stress on the bearing itself.
  • Synchronous AC motor with a new motor PCB and aluminium pulley offering low noise and better speed stability.
  • RB110 tonearm built with Rega designed bespoke ultra low friction bearings.
Check Stock

BPA-RACING 10-Ton Snatch Block | Pulley Block With Easy Grip Handle | Works With 3/4 D-Rings & Synthetic Rope up to 15/32” | Heavy Duty Winch Accessories | Offroad Recovery Emergency Kit

  • ... to keep it with you during every off-road adventure. A great choice even for smaller cars with limited storage space..
  • WORKS WONDERS WITH MOST ROPE OR STEEL CABLES: Use our universal pulley block with any winch rope or steel cable up to 15/32” (12mm) to tow your car with ease and precision. Plus, the super strong aluminium pulley wheel allows you to easily change the direction of your off-road recovery without damaging the rope used..
  • UNCONDITIONAL SATISFACTION GUARANTEE: Committed to providing the best equipment for your off-road adventures, all our winch accessories are designed in Germany according to the highest quality standards for safe and enjoyable rides. Backed up by our Ironclad Satisfaction Guarantee, you have nothing to worry about. Order your recovery gear today and be always prepared for any towing emergency!.
Check Stock

Oscilloscope Silicone Shell, DS213 Black Mini Oscilloscope Silicone Case Shell with 1Pcs Ring Bracket DIY Electrician DS213 Oscilloscope Silicone Case

  • Perfect for climbing, also excels great in other uses like hauling, transporting, etc..
  • Heavy duty, it can withstand about 26KN pull strength, the side plates can prevent rope from skidding, super reliable for keep your safety in climbing..
  • The small hole is 12mm, the large hole is 14mm, suitable for rope with diameter under 12mm..
  • This pulley is constructed with premium aluminium alloy, anti-rust, high strength and durable..
  • Fine polish ensures sleek surface, providing smooth and quick rotation to greatly reduce friction..
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

TooTaci 25MM Pulley Block System for Lifting with Rope and Hooks, 2pcs 304 Stainless Steel M25 Lifting Pulley Block Cable Wire Towing Wheel,66ft Nylon Rope & 2pcs Carabiner Hook

  • Pulley and Rope Kit : 2Pcs 25MM Crane pulley wheel,2Pcs x Carabiner Snap Hook Clips,20 meter Nylon Pulley Line rope.Loading 150 kg/300LB.
  • M25 Pulley Block: Heavy Duty Pulley is anti-rust and wear resistance with strong structure, surface is shock light processing, whose main material is 304 stainless steel..
  • Ergonomic Design : Pulleys for lifting fixed top for easily rope handling, smooth roller provides pretty good rope traverse, pulley rotation cylinder head is solid, durable, 360 degrees rotation to prevent rope from knotting.
  • Pulleys for lifting with Rope and Hook: 66ft solid braided polypropylene pulley rope - extreme strong with high tenacity.
  • Pulleys for Carabiner: Versatile binding, rigging & anchoring hardware - quick connect/dis-connect of ropes, chains, straps..
  • Outdoor Pulley System Lifting widely use for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system,clothesline pulley system outdoors,garage pulley system,treehouse pulley system,gym pulley system...pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,....
  • fit for steel wire rope or any strong rope,for indoor outdoor lifting application....
Check Stock

GM CLIMBING 20kN Micro Prusik Minding Pulley 1/2\ CE UIAA Certified (Pack of 2(Black))

  • GM CLIMBING Micro Prusik Minding Pulley (PMP), rated at 20kN/4500lbs MBS, both CE and UIAA certified, compatible with ropes up to 1/2 in / 13mm. Function pulley installed on ropes and clipped to tend hitch slacks in Ddrt climbing or work-positioning. A day-to-day use pulley in riggings, integrated with prusik hitches to build progress capture on haul system, making efficient redirects in bear rigging, home pulling exercise devices, and more to explore..
  • Quality-made climbing pulley, with 20kN breaking strength [5kN higher than required 15kN by CE and UIAA], to build up efficient pulley mechanical advantage systems: haul your partner out of the crevasse - personal rescue, rig gears or heavy loads when mountaineering, pull out a stranded car/ boat, haul food and stuffs out of reach when camping - bear rigging..
  • Palm-size pulley in lightweight of 3.7 oz. The micro pulley is easy to use with only one hand. Mobile side plates rotate freely around the axle and it's convenient to install the pulley anywhere on the rope. The pulley accommodates carabiners of most shapes since side plates are curved to stay fully close against each other on the top..
  • Prusik Minding! The pulley is designed to be with flat bottom to side plates, which makes a PMP (prusik mind....
Check Stock

Pulley Wheel Stainless Steel Small Pulley Block 360 Degree Rotating Silent Cable Pully Load Bearing Mechanical Pulleys, Silver (Silver-2)

  • Material:Pulley wheel is made of high-quality stainless steel, which is strong, rust-proof, wear-resistant and corrosion-resistant.
  • Whirling:Top of pulley system 360 degrees whirl to prevent the rope from twisting, maintain a stable cable pulley block,load bearing.
  • Quiet:Rope puller smooth sliding, small high-quality nylon slot double bearing design pulley pro does not produce noise.
  • Install:Pulley hoist can be installed on wood, wall and metal, rope pulley suitable for home fitness or outdoor work.
  • Gym pulley system:Pulley attachments specially designed for home gym pulley system DIY, construction, cable hoisting etc.
Check Stock

TooTaci Pulley System Set,Pulley Block with Rope and Hooks,Pulley and Rope Kit for Lifting,304 Stainless Steel M20 Single Pulley Wheels,with 20M/4mm Nylon Rope,Hooks,Eye Pad Plate,Cleat Hooks

  • Pulley Block Kit comes with 2Pcs M20 Crane pulley block,2Pcs Carabiner Snap Hook Clips, 2Pcs Oblong Eye Pad Plate, 2Pcs Cleat Hooks, 20 meter Nylon Pulley Line Rope And screw Accessories Ideal Kit to Make an Easy Pulley System for Pulling & Lifting ..
  • This Pulley System Set have all the Items you needed for pulley system rather than have to buy each part separately.
  • This Kit include Pulley Block ,Carabiner Hook, Eye Pad Plate,Cleat Hooks all made of 304 stainless steel, anti-rust and wear resistance with strong structure, easy to fit and use in any weather !.
  • Pulley Block with Ergonomic design, fixed top for easily rope handling.
  • 4mm Pulley Line rope 65ft extreme strong with high tenacity and enough length.
  • Eye Pad Plate & Carabiner Hook provide versatile binding with rigging or anchoring for quick connect of ropes, chains, straps..
  • NOTE: The Maximum Load Capacity of a Single Pulley Block is 50KG/110LB !.
  • Pulley with Rope and Hook Many Uses for Make an Easy Pulley System for fastening rope to flagpole, small boats, awnings, blinds,tarps ,etc....
  • As a topping lift for a portable garage door.
  • Works well for bird feeder pulley system, pull and climbing ropes to raise and lower.
  • Used to fit and tension a sail shade,... Perfect doe....
Check Stock

JRC Components Ceramic Derailleur Pulley Wheel for SRAM Eagle | Pair of 14&12T Jockey Wheels Ceramic Bearing - Road Bike Rear Derailleur Pulley Wheels | Ceramic Speed Pulley Wheels - Black

  • JRC Components Ceramic Pulley Wheels are compatible with all SRAM Eagle Systems. Narrow-Wide Ceramic 12 + 14tooth Jockey Wheels are crafted from billet aluminium, CNC machined and finally anodised before having hybrid ceramic bearings installed..
  • Hybrid Ceramic bearings to lessen friction and packed with grease for flawless use all year round!.
  • *Please note these pulleys are made with SRAM Eagle groupsets in mind*.
Check Stock

Phoenix V-Belt Pulley - 5/8in. Bore, 4 1/2in. Outside Dia.

  • Price For: Each Set Screw Included: Yes Construction: Spoked Number of Grooves: 1 Item: V-Belt Pulley Pulley Bore Type: Fixed Bore Pulley Type: Standard V-Belt Pulley For V-Belt Section: 3L, 4L, A Bushing Required: None Pulley Material: Die Cast Zamak 3 Pulley Bore Dia.: 3/4" Pulley Outside Dia.: 7.00" 4LA or A Belt Pitch Dia.: 6.85" Keyway Size: 0.187" x 0.093".
  • 4L, A, or AX Belt Pitch Dia.: 6.85" 3L Belt Pitch Dia.: 6.55" Fits Shaft Dia.: 3/4" Country of Origin (subject to change): United States.
Check Stock

GM CLIMBING 29kN CE UIAA Certified Micro Pulley Slack Tender for Hitch Tending

  • GM CLIMBING Fixed Micro Pulley, rated at 29kN, CE and UIAA certified, works with ropes up to 0.47in/12mm. A functional pulley to advance hitches in Ddrt climbing systems, to tend hitch slacks on work-positioning lanyards.
  • Makes an efficient redirect in light rigging, hauling, mechanical advantage systems..
  • EASY USE! It's quick to install the rope on the micro pulley due to the fixed side plates. The oval-shaped carabiner is recommended to be used with. Pocket size allows easy operation on your palm to set up various climbing or rigging configurations..
  • 29kN strength rating! Fixed micro pulley offers full strength in lightweight of 3.05 Oz, capable of being an efficient part of your tree climbing, adjusters of work-positioning lanyards, and self-rescue pulley systems. CE and UIAA certified ensures a safe pulley for activities at height and in-depth..
  • Smooth rotation due to the sheave being mounted with self-lubricating bushing that is efficient for transporting heavy loads. Aluminum plates with chamfer rounded edging reduce wear on the textile gears, well protecting ropes sliding through..
  • A quality-made micro pulley, most seen its functions in tending hitches in climbing techniques, reducing wear when installed on the climbing harness rope bridge. Also a....
Check Stock

VMS RACING 99-05 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1999-2005 1.8L BP-4W Engines ONLY OEM SIZE (uses same belts)

  • Function: This crank pulley tool is used to maintain the harmonic damper pulley position while removing/installing the pulley bolt.
  • Feature: Used with a 1/2inch breaker bar or ratchet, this crank pulley removal tool prevents the harmonic damper pulley from rotating while you're removing and setting the final torque specification on the pulley bolt..
  • Design: This 50 mm crank pulley tool socket designed with a hexagonal shape with a hole in the center of the tool that allows the use of a socket and extension to help loosen or tighten the pulley bolt..
  • Compatibility: This crankshaft pulley wrench holder tool compatible for Honda (most) and Acura engines..
  • Material: Made of hardened chrome molybdenum steel with great durability to long-lasting service your engine..
Check Stock