Categories

Best Aluminum Alloy Anchor

FPS 6 Duckbill Earth Anchor Cable Stakes 20'' and 1 Duckbill Stake Driver

  • 6 Pack - Duckbill 40-DB1 Earth Anchors with Drive Steel Tool Installing Duckbill Earth Anchors using an upward pull rotates the Duckbill into a load-lock position approximately 15° from horizontal. Further tension causes the anchor to plane sideways through undisturbed soil, increasing its holding power to up to 300 lbs. Nothing of the anchor is above the ground. Duckbill ends are Made of aluminum alloy it will not corrode or rust..
Check Stock

ENO, Eagles Nest Outfitters Fuse Tandem Hammock System, Slate

  • MADE FOR TWO: Relaxing alongside your BFF is now possible. The Fuse lets you set up two hammocks using only two anchor points. You will need two sets of ENO straps (not included), two ENO hammocks (not included), and two sturdy anchor points..
  • LIGHTWEIGHT: Weighing only 9.8 ounces, the Fuse unfolds to (L x W) 31" x 3" x 2". Plus, its super portable and easy to break down. Comes in a set with two spreader bars..
  • EASY TO SET UP: Simply attach the Fuse to each hammock using the rope between the hammock and carabiner. (Do not attach to carabiner or strap.).
  • DURABLE: Made from green anodized DAC aluminum alloy, which is durable, corrosion-resistant, and is made without the use of toxic chemicals..
  • ENO GIVES BACK: ENO loves the outdoors and shows it by donating to organizations that preserve our wild places..
Check Stock

Guardian 00102 Beamer 2000+ - 3.2 lbs, Beam Anchor with Top Latch Adjustment, Aluminum Bar

  • Adjustable Anchorage: Perfect for a wide range of fall protection needs when working with structural steel I-beams.
  • Construction Material: Safety anchor bar is made from aluminum that contributes to its robust design. It is constructed of bronze manganese, zinc-plated steel and stainless-steel. It has nylon bushings that ensure smooth movement of ring across the bar.
  • Easy Installation: This aluminum beam anchorage can be installed on beams with 3.5-14 in. wide and up to 1.25 in. thick flanges. You can attach the anchor at the foot level or use it overhead and connect the lanyard or harness with the D-ring of anchor.
  • Application: This aluminum anchor is used with the Personal Fall Arrest System. It can be used in a range of industries for safety restraint applications. This robust anchor ensures maximum safety to the industrial workers, allowing them to work freely.
  • Specification: Guardian Fall Protection Beamer Anchor weighs 3.2 lbs. It has a working range capacity of 130-420 lbs. and 5000 lbs. minimum breaking strength.
Check Stock

AFP 50FT Fall Protection Roofer Kit Braided Vertical Lifeline w/Rope Grab, 1 D-Ring Safety Harness, Hinged Anchor, Ballistic Nylon Tool Bag, Free Tool Lanyard | OSHA & ANSI Rated

  • ✅FREE TOOL LANYARD – Carry your tools in our heavy-duty 1680D Ballistic Nylon tool bag. Tool lanyard can be effectively released with one hand in any event. Dependable webbing material secures and resists 15lbs. Quick-release lightweight aluminum is self-locking and connects to belt or harness, allowing free movement. Double-hole cord stopper seals and locks tool securely. Compliant design for restricting force on the body and equipment caused by dropped tools, avoiding injury and damage..
  • ✅PREMIUM BRAIDED ROPE – AFP’s 50FT vertical lifeline is a premium braided rope with a 5/8’’ diameter. Maximum deployment distance of 48’’ and with an average arresting force of 900lbs! The rope is attached with a rope grab and two galvanized steel snap hooks with a gate strength of 3,600lbs. The rope grabs trailing feature allows rope grab to follow the user, providing freedom of movement. Alloy steel hardware ensures all weather performance avert wear and tear against all weather conditions..
  • ✅1 D-Ring Harness – Upgraded braided webbing designed with a high-tension stitching pattern for maximum security and tensile strength of over 5,000 lbs! The tough ....
Check Stock

Sutekus Folding Portable Truck with Loading 50 Kg

  • Lightweight telescopic aluminium travel trolley with 2 hook ropes.Please refer to the picture, The silver part is aluminum alloy, And the black part....
  • Hand Truck Size: Max 37.4" * 10.6" * 15.3", Folding Size: 3.3" × 10.6" × 15.3", Folds flat for easy storage..
  • This product is specially designed for people of different age. It has three different heights, Anyone elderly or children can get it..
  • Two bungee cords anchor baggage and prevents shifting. Just pull the cord tight enough, then hook it to the rung or frame tubes..
Check Stock

Powerhouse Lewis Chainsaw Winch (8,000 lb capacity) Kit

  • Extremely Tough Rugged cast-aluminum alloy housing Uses oil-bathed steel gears.
  • Extremely Strong variable line speed of 60 to 80 ft./min able to pull 4,000 lbs. in a straight line able to pull 8,000 lbs. using one winch snatch block.
  • Extremely Lightweight - 22 lbs./10 kg without the cable.
  • Extremely Versatile Includes a Universal Adaptor Kit to fit any chainsaw Can be anchored to: the ground using a ground anchor a tree stump using a cant hook a vehicle using a trailer hitch mount.
Check Stock

Malta Dynamics Reusable Parapet Anchor for Temporary Fall Arrest Anchorage, Fits Parapet Walls from 2.36” to 14.1” Thick, No Installation Tools Required, Black

  • Reusable Parapet Anchor: This reusable parapet anchor is specifically designed to be used on flat roofs that are surrounded by a parapet wall with a minimum wall thickness 2.36". Maximum wall thickness 14.1”. Overall length 25.5”. Overall height 14.25". 9” minimum wall height ..
  • Non-Penetrating Design: Designed to prevent parapet wall penetration, this anchor features rubber protective pads to further eliminate damage to the parapet wall. Dual tightening handles for even force distribution.
  • protective pads eliminate damage during install.
  • Strong & Durable: Meets the standards of OSHA and ANSI Z359.18-2017 Type A. Manufactured with one zinc plated steel D-Ring, this anchor’s body is composed of alloy steel with zinc plated steel screws. Intended to use as part of a personal fall arrest system, it has a 130-310lbs weight capacity range..
  • Easy To Install: No installation tools are required for this parapet wall roof anchor. With its dual tightening handles for even force distribution, this anchor is fully adjustable .Main body: Alloy Steel. D-ring: Zinc Plated Steel. Set Screws: Zinc Plated Steel..
  • Let Us Help Protect You: At Malta Dynamics we have more than 140 years combined developing fall protection gear, we know a good....
Check Stock

KURUI #8 Zinc Self-Drilling Drywall Anchors, 60PCs Hollow Metal Wall Anchors and Screws Kit, 30 Heavy Duty Anchors + 30#8 x 1-1/4'' Screws, 50-75LB Hanging and Mounting

  • PREMUIM QUALITY ZINC ALLOY – This drywall anchor made of high-quality zinc alloy is of high strength, high scratch resistance and rush resistance. We use superior heavy-duty steel for the galvanized screws set to ensure its strength. What’s more, the galvanized screws are corrosion resistant, which makes their service life even longer. The Zinc alloy wall anchor can load up to 50lbs..
  • RACTICAL DESIGN FOR STABLE INSTALLATION - The threads cut deep into the material, providing a secure hold and pull-out resistant grip of the wall anchor and screw kit. The large threads are intended to hold firmly in drywall and can hold up to 50 pounds of objects..
  • EASY INSTALLATION WITH SCREWDRIVER – These threaded zinc drywall anchors feature sharp, pointed shanks that can be screwed into the wall without a pre-drilled hole by using a screwdriver or a screw gun, which produces less dust. Once the anchor is in the wall, the screw is inserted, the anchor will wedge tightly against the drywall..
  • HEAVY DUTY & WIDE APPLICATION – The zinc self-drilling drywall anchors are recommended for medium-duty applications and are very easy to install. They are perfect for hanging bathroom and kitchen accessories, shelving, light fixtures, mirrors, picture frames, curtain rods a....
Check Stock

Boloniprod 4Pcs Angle Clamps Bar Clamps Right Angle Fixing Clip Multi-function Woodworking Right Angle Clamp Adjustable Swing Corner Clamp Corner Clip Fixer for Welding,Wood-Working,Making Cabinets

  • ...lamps squares upgraded design with Metric/Inch scale to provide convenient measuring guidance. The 30°45°60°angle reference mark line as an auxiliary function of angle drawing/ measuring, on both end edges have 135°bevel. The scientific and reasonable anchor hole spacing can effectively maintain the strength of aluminum alloy (Patent Pending).
  • High Durable Alloy Material: The right angle clamps squares made with Aluminum Alloy(6061-T6). CNC Machined from solid aluminum, don't break.Anodized red surface,corrosion-resistant, anti-rust, has a durable and long service life..
  • Professional Woodworking Tools: 140*140mm carpentry right angle jig professionally used for making drawers, photo frames, boxes, abinetsand positioning corners, convenient for wood board jointing and gluing. Simplify woodworking projects, save time, and make the finished product better. （More instructions see the use manual/ e-book）.
  • Easy to Use: The woodworking square have beveled edges, L shaped corner clamp is easy to use..  Just place the square in the corner of the two stock pieces you need to square and secure with a set of clamps. This set of squares and clamps can make your operation more convenient. The set squares and clamps are fully adapted to various large and smal....
Check Stock

CONFAST 3/8\ Lag Shield Anchor Long (12 per Box)

  • Expansion shield anchor provides a secure hold in most materials including solid masonry and uncracked concrete, even in applications where the anchor will be exposed to side pressure or vibration.
  • Anchor is made of rust-resistant zamac alloy and consists of cone on each side that expands the surrounding sleeve when a threaded machine bolt is inserted, gripping the mounting material and holding the anchor in place.
  • Meets Fed. Spec. GSA FFS-325 Group II Type 2 Class 2 Style 2 specifications.
  • Ultimate tensile strength is 1,190 lb. in 2,000-psi concrete.
  • Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations).
Check Stock

Titagail Red wine preservation stopper,Stainless Anchor shape wine bottle stopper Vacuum Food Grade Silicone Mater Set of 2(sliver）

  • Keep Freshest: The anchor wine stoppers made of durable zinc alloy materials and food-grade silicone materials. Can keep your wine fresh, safe to use and long time usage.
  • Widely Used:Anchor bottle stopper is suitable for all glass bottle wines, red wine, whiskey, champagne, rose wine and beverage, etc.
  • Elegant Design: Our wine bottle stoppers are designed in the shape of anchor, cute and funny, elegant and pretty, fine workmanship, suitable for decorating wine bottles, adding a touch of elegance to them..
  • Quality Guarantee: If for any reason you are not 100% satisfied with our products, you will get the full money back gurantee of your purchase..
  • Material: The ideal wine saver vacuum stoppers is made of durable zinc alloy material and food grade silicone material..
Check Stock

Anrik 1\\/4 inch x 2-1\\/4 inch - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Concrete

  • Wedge anchor diameter: 1/4" | Length: 2-1/4" | Qty: 20 pieces. Our wedge anchor is made from high quality carbon steel, and is zinc plated to prevent rust.
  • Drill bit diameter/Hole diameter is the same as anchor diameter. Use a 1/4" drill bit to drill a hole in the base material (Concrete only).
  • The wedge anchor is a torque-controlled, wedge expansion anchor. The required installation torque of the anchor is 4 ft/lbs..
  • The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed. It is for concrete only, not for block or brick base material.
  • The wedge anchor is used in fastening sheet metal, steel and aluminum angles, or wood to concrete. The wedge anchor is ideal for structural anchorage, storage racking anchorage, machinery and hand rails installation.
Check Stock

Ironwood Pacific AnchorLift Anchor Puller for River and Lake Anchoring, Floats up to 80 lbs

  • FLOAT YOUR ANCHOR OR CRAB TRAP TO THE SURFACE - The AnchorLift Anchor Puller easily floats anchors, crab traps, and lobster pots up to 80 lbs..
  • EASY-TO-USE ANCHOR RETRIEVAL SYSTEM - Slide the AnchorLift over the anchor line, tie off to a cleat and let the anchor out by holding the sliding bolt in the up position. When anchored toss the AnchorLift with buoy into the water. To raise your anchor motor your boat forward to float the anchor to the surface..
  • IDEAL FOR ANCHORING IN RIVERS AND LAKES - Use in place of a winch or windlass. Sliding stainless steel bolt grabs line and locks anchor at water's surface. Designed for use with anchor lines 3/8" to 5/8" in diameter..
  • QUALITY CONSTRUCTION - Made from marine grade nylon with stainless steel at all wear points. For extra heavy-duty use, consider our anodized aluminum AnchorLift Pro model. (Link in description below)..
  • MADE IN THE USA - The AnchorLift Anchor Puller and Polyform buoy are made in the USA and backed by a limited lifetime warranty..
Check Stock