Categories

Best Aluminum Alloy Castings

Delft Clay Casting for Gold, Silver, Copper-Based alloys, Pewter

  • ✅ The Delft Clay Method is a highly refined form of sand casting that substitutes genuine Delft Clay from Holland for ordinary casting sand. The process was invented by Hans Karreman, a Dutch goldsmith. Delft Clay is much finer than casting sand, providing remarkably sharp and highly detailed castings in gold, silver, copper-based alloys, pewter, etc..
  • ✅ Castings require very little finishing work. Once you have cast your piece, the Delft Clay can be re-used. Since this is a cold-molding process, molds can be made from patterns composed of wood, wax, epoxy, plastics, and, of course, metal. Because this is a type of sand casting, it is best suited to producing castings without pronounced undercuts..
  • ✅ The Delft Clay Casting Kit includes: 4.4lbs Delft Clay, 2 - 60mm dia. Aluminum Ring Frame, and detailed instructions..
Check Stock

SÜA - Aluminum E4043 Stick Electrode Rod 3/32\ x 14\ - (1 Lb)

  • SÜA - E4043 is used for production or maintenance and repair welding on all weldable grades of aluminum sheets, plates, pipes, castings, and extrusions with a minimum of 3/32” thickness. Special extruded coating in this electrode is dense and without the air holes found in cheaper dip-coated electrodes and it provides a gas atmosphere to protect the arc..
  • ***READ THIS: The images are for reference only. Please check Picture #2 for an approximate quantity of electrodes per pound***.
  • Can be used as a SMAW-stick electrode or as an oxyacetylene brazing rod. Very easy to use with an exceptionally stable arc, operating at low amperages with a very minimal amount of spatter or fumes. Weld deposits are strong, dense, porosity-free with good color match and corrosion resistance. Good weldability.
  • rapid ignition and re-ignition, little splashing, easy removal of oxides, the characteristics of the joints are particularly good. Good capillary fluidity..
  • Commonly used on irrigation piping systems, refrigeration equipment, appliances, boat parts, ornamental aluminum parts, aluminum door or window frames, aluminum ladders, tanks, shelves, automotive, trucks or bus parts, machining errors, and building-up missing sections on castings, extrusions, and plates..
Check Stock

AUTOTOOLHOME 2 inch (50mm) Metal Steel Hole Saw Tooth Carbide Tip TCT Drill Bits Kit for Thick Metal Wood

  • TCT drill bit is suitable for hand held electric drill, beach drill,stand motor-driven drilling machine and mobile ribbon type magnetism drilling machine..
  • The gears is made from YG8 tungsten carbide steel and the rigidity varies from 64HRC to 65HRC..
  • Sharp gears and anti-cutting with lower consumption make the product a long service life..
  • The hole saw has a center twist drill bit inside, Can drill about 3/4 inch depth for the wood, and can drill about 3/16 inch thickness for the steel.
  • Carbide teeth for fast cutting of clean, round holes.Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,etc..
Check Stock

Olideauto Automatic Single Chain Window Closers Running Trip is Adjustable from 3.94inch to 15.74inch,DC24V Motorized Window Opener AC110V Input Power with Low Noise

  • Stroke can be manual adjusted by stroke adjustable knob, convenient and quick.
  • Obstructing stop function, ensuring the safety of motor operation and protecting system structure is not destroyed.
  • The shell is made of sand blasting aluminum profile, sides end covers and mounting brackets are all zinc alloy precision die castings..
  • Wide voltage AC100-240V input is suitable for national voltage standards.
Check Stock

Oberdorfer N993R Gear Pump with Relief Valve, 8.8 gpm, 1/2\ NPT, 20 ft Maximum Suction Lift

  • SPECIFICATIONS: The International Fluid Power Birotational Gear Pump is a heavy-duty gear pump with a 2-bolt B mount, 1” NPT work port, 3000 PSI, 23.8 GPM flow rate, and 2400 maximum RPM. It weighs 37 lb..
  • HIGH EFFICIENCY: With 2400 max RPM and 23.8 GPM flow rate, this hydraulic gear pump offers high volumetric output. The IFP gear pump provides exceptionally dynamic performance and operational efficiency in demanding conditions..
  • ROBUST: Our hydraulic rotary pump is equipped with top-grade cast iron flanges, shaft bearings, castings, and an aluminum-alloy body to handle system transmission pressures of up to 3000 PSI. Its endurance makes it ideal for harsh conditions..
  • CONVENIENT: This low flow hydraulic pump, made from top-grade materials and precision-honed to perfection, is compact, portable, and interchangeable with Parker "P51.
Check Stock

TCT Hole Saw Set 3pcs JESTUOUS 3/8 Inch Shank Diameter 7/8 1-1/8 1-3/8 Cutting Dia Carbide Tipped Tooth Round Drill Bit Hole Kit Cutter for Stainless Steel Metal Wood

  • Carbide tipped hole saws are suitable for electric drills and platform drills..
  • High quality tungsten carbide materail teeth,reduce the damage of tips,increase the endurance,provide a longer service life..
  • Driling with stainless steel plate,high alloy steel,iron,aluminum,castings,plastic,metal,wood,FRP,etc..
  • Designed with precision ground,sharp tough gears and stepped pilot drill bit to drilling more precise,smooth,faster and safer,leave perfect cutting results..
  • Package: 3 hole saws(cutting diameter:22mm/29mm/35mm)+extra 2 pilot drill bits+extra 1 ejector spring with plastic case..
Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

LDEXIN 38mm/1.5 Inch Carbide Tipped Hole Saw Carbide Hole Cutter Drill Bit for Cutting Metal Plate, Iron, Hard Wood

  • 【Package Content】 1Pcs Stainless Steel Hole Saw in a pack.
  • 【High Quality】 Carbide Tipped Hole Saw Tooth Drill Bits, made of Carbide Metal, give fast and easy cutting. Sharp gears and anti-cutting with lower consumption make the product a long service life.
  • 【Perfect Design】 It has an ejection spring for easy plug ejection, along with a raised shoulder helps prevent break through. The hole saw has a twist drill bit inside, which is undetachable.Specially used on metal and steel plate, give fast and easy cutting.
  • 【Wide Application】 Carbide teeth for fast cutting of clean, round holes,you can easily to drill on the thin stainless steel plate, iron, steel, castings, aluminum alloy and other metal plate drilling.
  • 【Service Guarantee】 LDEXIN guarantee high quality and good service. If you are not satisfied, we offer a 100% money back guarantee. No questions asked. Because we want you to be happy!.
Check Stock

Devcon 10610 Aluminum Putty (F), 1 lb. Can

  • Repairs air conditioning system components.
Check Stock

Norton Gemini 57A24-R Type 18 Abrasive Grinding Cone, Aluminum Oxide, 24190 rpm, 1-1/2 Diameter x 3\ Thickness, 5/8\-11 Arbor, 24 Grit (Pack of 1)

  • 57A aluminum oxide abrasive for strong performance to price relationship.
  • Removing flaws, cracks, gates, risers and parting lines, smoothing weld seams, cleaning castings, and rough beveling.
  • For consistent, quality performance in foundries, welding shops, fabrication facilities, steel mills and shipyards, norton cones and plugs maximize your productivity.
  • for hard-to-reach areas inside castings, removing flaws and cracks, removing metal in corners.
Check Stock

Norton Gemini 57A24-R Type 18 Square Tip Abrasive Grinding Plug, Aluminum Oxide, 24190 rpm, 1-1/2 Diameter x 2-1/2\ Thickness, 5/8\-11 Arbor, 24 Grit (Pack of 1)

  • 57A aluminum oxide abrasive for strong performance to price relationship.
  • Removing flaws, cracks, gates, risers and parting lines, smoothing weld seams, cleaning castings, and rough beveling.
  • For consistent, quality performance in foundries, welding shops, fabrication facilities, steel mills and shipyards, norton cones and plugs maximize your productivity.
  • for hard-to-reach areas inside castings, removing flaws and cracks, removing metal in corners.
Check Stock

Dixon 1/8\ x 1/8\ Brass Female Elbow Compression Fitting (170C-0202)

  • Approved to ansi/nsf 61-4 California ab 1953.
  • Meets federal state drinking water act, lead free requirement.
  • Brass castings conform to astm B584, uns alloy C8933.
  • Brass fittings dimensions conform to asme B16.15.
Check Stock

Permatex 14600 Cold Weld Bonding Compound, Two 1 oz. Tubes , Black

  • 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing.
  • Repairs, fills and bonds to iron, steel, brass, bronze, aluminum and copper.
  • can be drilled, tapped, threaded, filed, sanded and painted once cured.
  • resists most automotive, shop and cleaning fluids.
  • Temperature Range: up to 300°F intermittent.
  • Suggested Applications: Aluminum, steel, brass, bronze, castings and stampings.
Check Stock