Categories

Best Aluminum Alloys Plates

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

AMTAST Barcol Impressor Portable Indentation Hardness Tester, Test Range 0~100HBa Equal to 25~150HBW

  • Portable indentation hardness tester. Single hand operation.
  • Easy conversion. The test results can be converted to HB, HR,HV and HW easily through conversion table..
  • High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry..
  • Wide valid testing range equivalent to Brinell hardness 25-150HBW..
  • Barcol Impressor is mainly applied to test aluminum and aluminum alloys..
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

TRIM Cutting & Grinding Fluids E206N/1 Long Life Emulsion, 1 gal Jug

  • Dramatically extends useful life without the need for tank-side biocides or fungicides.
  • Low foaming for todays demanding high-pressure, high-volume applications.
  • Compatible with a very wide range of material including steels, copper, and aluminum alloys, and many plastics and composites.
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives.
Check Stock

Bar Keepers Friend Soft Cleanser Premixed Formula | 13 oz. container + 25.4 oz. spray bottle| (2-Pack)

  • Soft Cleanser delivers the same power as the Classic Cleanser & Polish, but in a premixed formulation for a quick, consistent clean. The creamy, ready-to-use formulation clings to vertical surfaces, works well against rust stains, tarnish, mineral deposits, soap scum, and indoor or outdoor grime..
  • MORE Spray and Foam tackles tough cleaning jobs on a wide range of surfaces. Removes MORE from most hard surfaces with its incredible cleaning power. Open nozzle flat to choose spray option or close nozzle flap for foam application..
  • SURFACES: Stainless Steel, Brass, Bronze, Copper Alloys, Aluminum, Ceramic, Porcelain, Glass, and Corian..
  • KITCHEN: Sinks, Appliances, Cookware, Stove cooktops and exteriors, Oven door windows, Countertops, Backsplashes, Faucets, Fixtures, Handles, Pulls, and Plates (buffs out knife marks)..
  • BATHROOM: Sinks, Bathtubs and Showers, Faucets, Toilets, Tiles, and Grout. OUTDOORS: Rust Stain Remover, Grills, Vehicles (test first), Siding, and Sporting Equipment..
Check Stock

3M Roloc Disc 777F, TR, 2 in x NH, 80 YF-weight

  • A blend of ceramic and aluminum oxide mineral self-sharpens and offers improved durability and cut-rate over aluminum oxide.
  • 3M Roloc attachment system enables efficient and secure attachment and removal of the disc.
  • Polyester backing is extremely tough to support medium-pressure applications while maintaining consistent performance in both wet and dry applications.
  • Grinding aid reduces grinding temperatures for processes involving heat-sensitive alloys such as stainless steel, nickel alloys, and titanium.
  • Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat, and water.
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

KastKing Zephyr Baitcasting Reels BFS Fishing Reel, Drag Clicker Version,Right Hand Bait Finesse Casting Reel

  • ...bon fiber plus the durability and smoothness of precision gears and double shielded stainless steel ball bearings in a fishing reel that only weighs 5.6oz..
  • WHY CARBON FIBER – KastKing Bait Finesse System Zephyr baitcasting reels use an extensive array of unique carbon fiber materials. Carbon fiber is lighter than aluminum and stronger than steel for its weight. KastKing built Zephyr casting reels with carbon fiber frames and side plates and a carbon disc drag for 10 Lbs. of smooth drag with light finesse fishing lines. Zephyr takes your BFS game to a whole new level!.
  • SMOOTHNESS WHERe IT COUNTS – Inside Zephyr’s carbon shell are 6 + 1 double shielded stainless steel ball bearings with super free-spooling spool bearings that allow the farthest casts with the lightest baits. Precision machined T7075 hardened aluminum alloy main gears and brass pinion gears, nickel plated brass worm shaft, and an 8-magnet braking system get the work done easily and without effort..
  • MORE FEATURES – To save even more weight without sacrificing strength KastKing chose advanced aluminum alloys for the laser engraved anodized shallow spool, main shaft, main gear, black anodized handle with EVA knob, and tension knob. And to add more excitement to BFS catches, ther....
Check Stock

KastKing Zephyr Baitcasting Reels BFS Fishing Reel, Drag Clicker Version,Left Hand Bait Finesse Casting Reel

  • ...bon fiber plus the durability and smoothness of precision gears and double shielded stainless steel ball bearings in a fishing reel that only weighs 5.6oz..
  • WHY CARBON FIBER – KastKing Bait Finesse System Zephyr baitcasting reels use an extensive array of unique carbon fiber materials. Carbon fiber is lighter than aluminum and stronger than steel for its weight. KastKing built Zephyr casting reels with carbon fiber frames and side plates and a carbon disc drag for 10 Lbs. of smooth drag with light finesse fishing lines. Zephyr takes your BFS game to a whole new level!.
  • SMOOTHNESS WHERe IT COUNTS – Inside Zephyr’s carbon shell are 6 + 1 double shielded stainless steel ball bearings with super free-spooling spool bearings that allow the farthest casts with the lightest baits. Precision machined T7075 hardened aluminum alloy main gears and brass pinion gears, nickel plated brass worm shaft, and an 8-magnet braking system get the work done easily and without effort..
  • MORE FEATURES – To save even more weight without sacrificing strength KastKing chose advanced aluminum alloys for the laser engraved anodized shallow spool, main shaft, main gear, black anodized handle with EVA knob, and tension knob. And to add more excitement to BFS catches, ther....
Check Stock

homEdge Carburetor Cleaning Tool Kits, Carb Carburetor Jet Cleaner for ATV, UTV, Motorcycle Moped Welder Carb, Jet Dirt Remover, Set of 10 Cleaning Needles + 5 Nylon Brushes + 13 Cleaning Wires Set

  • Fast: Once parts are placed in the ultrasonic parts cleaner solution, and cleaning initiated, parts can be very quickly cleaned in an environmentally friendly manner..
  • Safe on All Metals and Non Toxic: This non toxic Ultrasonic Cleaning Solution for Carburetors is safe on all metals including aluminum, aluminum alloys, brass, cast iron, copper, copper alloys, ferrous metals, magnesium, yellow alloys, zinc, and coins. Does not contain borates, phenols, nitrates, SARA 313,EPA 33/50 listed ingredients, or butyl cellusolve..
Check Stock

Enginetech BB136JSTD Rod BRNG AMC CHRY Dodge 273 277 301 318 326 340 360

  • Performance of new aluminum-silicone alloys is now better than the original tri-metal designs..
Check Stock

C.S. Unitec | Non-Sparking & Non-Magnetic Aluminum Bronze Socket Wrench Set |16pc 3/4 inch Drive Socket Set 1-5/16 to 2 inch,EX1540-KIT A

  • Our Tools are specially manufactured with Copper- Beryllium alloys or Aluminum Bronze alloys for Non-Sparking, Non-Magnetic, and Corrosion Resistance. Safe to be used in hazardous environments, ATEX and EX Zones..
  • This industrial quality hammer welding tool is designed to eliminate the risk of sparks at sites where explosive atmospheres may be present such as flammable or combustible vapors, liquids, dusts or residues..
  • Non-Metallic benefits of these alloys make them ideal for working on MRI, FMRI, NMR, clean room environments and special machinery with powerful magnets..
  • Advanced forging technology ensures the high quality and refined appearance of all our products.
  • LIFETIME WARRANTY: Advanced forging technology ensures the high quality and refined appearance of all our products. We are offering warranty against breakage or performance failure under normal use..
Check Stock