Categories

Best Aluminum Alloys Scaffolding

Little Giant Ladder Systems 14010-001 13-Feet 250-Pound Duty Rating Alta-One Model 13 Ladder System

  • Use to support three different scaffolding heights as well as multiple workbench heights.
  • Made of the same super-strong aluminum as our heavy duty ladders for maximum security and durability.
  • Replaces expensive and labor-intensive scaffolding systems, saving hundreds of dollars.
  • This trestle bracket kit is only compatible with the Little Giant Velocity, Defender, Leveler, Liberty and LT models.
Check Stock

PHR-1 Small Portable Rockwell Hardness Tester (PHR-1)

  • Portable indentation hardness tester. Single hand operation.
  • Easy conversion. The test results can be converted to HB, HR,HV and HW easily through conversion table..
  • High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry..
  • Wide valid testing range equivalent to Brinell hardness 25-150HBW..
  • Barcol Impressor is mainly applied to test aluminum and aluminum alloys..
Check Stock

CNC Foot Pegs Footpegs Foot Rests Foot Pedals - For XR50R XR70R XR80R XR100R 2000-2005 KLR 650 1987-2005 - Red

  • 【Material】This Foot Pegs was made from forged T7 7075 aluminum, one of the highest strenght alloys..
  • 【Fitment】Z50R 1980-1999 / XR50R 2000-2003 / XR70R 1997-2003 / XR80R 1985-2003 / XR100R 1985-2003 / CRF80F 2004-2013 / CRF100F 2004-2013 / KLR650 KL650 1987-2007.
  • 【Feature】Sharp teeth made from hardened steel resist wear,Removeable and replaceable teeth,Improved comfort and control with nearly 30% more surface area.
  • 【Anodized】This motorcycle foot rest is anodized finishes to prevent from oxidizing and scratches which increases resistance to corrosion and wear.
  • 【Package Includes】1 Pair Foot Pegs As Pictures, Instruction of Installation is NOT Included.
Check Stock

Midwest Tungsten Service TIG Welding Tungsten Electrodes 10-Pack Blue - 2% Lanthanated Tungsten WL20/EWLa-2 3/32

  • PREMIUM ten (10) pack of 3/32" tungsten electrodes for TIG welding for the beginner, intermediate, and professional TIG welder. From students to industrial and artistic users, these fit your use.
  • HIGHEST RATED and most reviewed 2% Lanthanated Tungsten TIG electrodes on Amazon ready to help you make the perfect weld. Noted for their reliability and consistent performance..
  • EXCEPTIONAL for both AC & DC applications and for welding aluminum alloys, magnesium alloys, nickel alloys, copper alloys, titanium alloys, low-alloyed steels, and non-corroding steels.
  • UNITED STATES based manufacturing & knowledgeable customer service staff are here to help you pick the perfect TIG tungsten for your welding job, large or small..
  • FREE materials safety data sheet (MSDS) and certificate of conformance linked below, the tungsten electrodes adhere to American Welding Society standard A5.12M/A5.12:2036.
Check Stock

AMTAST Barcol Impressor Portable Indentation Hardness Tester, Test Range 0~100HBa Equal to 25~150HBW

  • Portable indentation hardness tester. Single hand operation.
  • Easy conversion. The test results can be converted to HB, HR,HV and HW easily through conversion table..
  • High sensitivity. Featured with 100 scales, much more sensitive than Webster hardness testers applied in aluminum alloys industry..
  • Wide valid testing range equivalent to Brinell hardness 25-150HBW..
  • Barcol Impressor is mainly applied to test aluminum and aluminum alloys..
Check Stock

Tungsten Electrodes for Tig Welding 2% Grey Ceriated Tungsten Assorted- 5PCS 3/32 + 5PCS 1/16

  • Premium 10PK tig welding tungsten electrodes 2% ceriated gray WC20/EWCe-2, 5PCS 1/16" & 5pk 3/32" ceriated tungsten electrodes for tig welding.
  • The ceriated tungsten tig electrode is with high performance: No spitting,stable consistent arc starts and good stability with low burn-off rate..
  • The 2% ceriated tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length 2% grey ceriated tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

Little Giant Ladders, Velocity, M13, 13 Ft, Multi-Position Ladder, Aluminum, Type 1A, 300 lbs Weight Rating, (15413-001)

  • Dimensions - Max A-frame height: 5'1'' | Max Extension Height: 11' | Max scaffolding height: 3' | Max workbench height: 3' | Min A-frame Height: 3'1'' | Min Extension Height: 7' | Storage Depth: 8" | Storage height: 3'7" | Width at base: 24" | Weight: 25 lbs.
  • The Velocity also includes several innovative new features such as the dual-pin hinge and the easy-to-use rock, locks for quick adjustment.
  • The Velocity can be used in many unique configurations as an a-frame, extension, staircase and 90-Degree ladder, and with Velocity trestle brackets (sold separately) to form a trestle-and-plank scaffolding system.
  • The Velocity's wide-flared legs and aerospace-grade aluminum construction provide an unmatched feeling of safety and stability.
Check Stock

TRIM Cutting & Grinding Fluids E206N/1 Long Life Emulsion, 1 gal Jug

  • Dramatically extends useful life without the need for tank-side biocides or fungicides.
  • Low foaming for todays demanding high-pressure, high-volume applications.
  • Compatible with a very wide range of material including steels, copper, and aluminum alloys, and many plastics and composites.
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys.
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives.
Check Stock

MRT SUPPLY 17 Foot Type IA Aluminum Multi Position LT Ladder with Ebook

  • Air craft grade lightweight aluminum ladder provides versatility and stability while you work – Rock Lock system lets you set up in seconds, simply push the lock to release the ladder, then tap to lock – Tip and Glide wheels make transporting from job to job easy.
  • Dual pin hinge and wide flared legs puts you in the safest position to get the job done – Ladder configurations include: A frame, staircase, 90 degrees, extension, and scaffolding – Easy to adjust to multiple heights and can adapt to almost any job – Complies with all applicable OSHA and ANSI A14.2 standards.
  • Specifications: Maximum A frame height: 7 feet 1 inch – Maximum extension height: 17 feet – Maximum scaffolding height: 3 feet – Maximum workbench height: 4 feet – Minimum A frame height: 4 feet 1 inch – Minimum extension height: 9 feet.
  • Palm and hinge system: Triple locking hinge – Spreader system: Hinge lock – Storage depth: 9 inches – Storage height: 4 feet 7 inch – Unique configurations: 24 – Weight capacity: 300 pounds – Ladder weight: 30.5 pounds.
Check Stock

3M Roloc Disc 777F, TR, 2 in x NH, 80 YF-weight

  • A blend of ceramic and aluminum oxide mineral self-sharpens and offers improved durability and cut-rate over aluminum oxide.
  • 3M Roloc attachment system enables efficient and secure attachment and removal of the disc.
  • Polyester backing is extremely tough to support medium-pressure applications while maintaining consistent performance in both wet and dry applications.
  • Grinding aid reduces grinding temperatures for processes involving heat-sensitive alloys such as stainless steel, nickel alloys, and titanium.
  • Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat, and water.
Check Stock

CharaVector 4 Step Ladder,Lightweight Folding Step Ladder,Folding Step Stool with Built-in Tool Platform and Anti-Slip Feet,Step Ladder with Handrails

  • Dimensions - Max A-frame height: 5'1'' | Max Extension Height: 11' | Max scaffolding height: 3' | Max workbench height: 3' | Min A-frame Height: 3'1'' | Min Extension Height: 7' | Storage Depth: 8" | Storage height: 3'7" | Width at base: 24" | Weight: 25 lbs.
  • The Velocity also includes several innovative new features such as the dual-pin hinge and the easy-to-use rock, locks for quick adjustment.
  • The Velocity can be used in many unique configurations as an a-frame, extension, staircase and 90-Degree ladder, and with Velocity trestle brackets (sold separately) to form a trestle-and-plank scaffolding system.
  • The Velocity's wide-flared legs and aerospace-grade aluminum construction provide an unmatched feeling of safety and stability.
Check Stock

3mirrors ALUMINUM Tungsten Electrode Sharpener Grinder Head TIG Welding Tool with Cut-Off Slot Multi-Angle & Offsets, 5X 25mm Double Diamond Wheels, 1X Connecting Rod

  • Premium 10PK purple rare earth blend (EWG) tig welding tungsten electrodes , 5pk 1/16" & 5pk 3/32" purple tungsten electrodes for tig welding.
  • The purple tungsten tig electrode is with great welding performance: non radioactive, reliable arc-striking, low burn-off rate and good stability with low burn-off rate..
  • The rare earth blend tungsten electrode perform reliably and consistently even in high current range on AC&DC applications for welding copper alloys, nickel alloys, titanium alloys,low-alloyed steels,magnesium alloys and aluminum alloys.
  • The tungsten electrodes adhere to American Welding Society AWS standards,great for beginner to professional tig welder for tig welding works.
  • Package including: 5PCS 1/16" & 5PCS 3/32" by 7"length rare earth blend (EWG) tungsten, Tungsten Electrode Size: 3/32" x 7"(2.4mm x 175mm )AND 1/16" x 7"(1.6mm x 175mm).Warm tips:We'll send the tungsten electrodes with old and new package at random. We guarantee with the same high quality.
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock