Categories

Best Aluminum Brazing Rod Harbor Freight

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

  • MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
  • ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
  • PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
  • APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....
Check Stock

20 Sticks Aluminum Welding Rods ，20″*φ0.06″ Aluminum Brazing Rods Low Temperature 550℃/1022℉，Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair

  • 【Closed Packaging】 GEOYLE brazing rods portable transparent sealed tube packaging, package contains 20 extra long 1/16″ x 20″ aluminum brazing rods. weight about 50g, longer size for your use. The lids at both ends can be opened for easy storage and portability..
  • 【Good Welding Fluidity】 Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile strength (RM): 130N/mm². aluminum brazing rods electrodes have good flow during welding and can flow into narrow gaps. The welding effect is completely flat..
  • 【Material】The low temperature aluminum welding rods. The composition of the solder: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%. for welding aluminum, aluminum alloys, aluminum-magnesium alloys and other white metals with high strength, good forgeability..
  • 【Wide Application】Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
  • crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
  • 【Quality Service】 When you encounter problems in the process of using the aluminum brazing rod, please contact us immediately, we will solve all....
Check Stock

BLUEFIRE J9802B 1/4lb Flux Cored Low Temperature Aluminium Brazing Coil All Purpose Welding Coil for Almost All Metals Soldering Propane Torch Universal Welding Rods flux Free

  • ...lux.In addition, the coil design of brazing rods is more convenient to carry than the rod design, you can use the brazing rods coil in your pocket for repair work anywhere and whenever it's needed. A great and thoughtful design!.
  • 【Universal Magic Alloy】BLUEFIRE flux cored welding coil is mainly made of zinc aluminum alloy,which can be used for brazing copper and aluminum, aluminum and aluminum, aluminum and stainless steel, aluminum and steel, etc.More specificly,BLUEFIRE flux cored welding coil can be used for brazing transformer,reactor,condenser, evaporator, radiator,motor, battery or other household appliances.You can use it to complete most of the brazing work in life..
  • 【Easy to Melt and Flow】BLUEFIRE flux cored brazing rods coil can melt at 752°F and have very good fluidity with good capillary attraction.In addition, BLUEFIRE flux cored welding wire is not only corrosion-resistant, but also is post-braze cleaning unnecessary. It's characteristics of high thermal conductivity and high conductivity make the welding effect full and smooth.It fits both professionals and amateurs..
  • 【Moistureproof】BLUEFIRE flux cored welding wire won't absorb water, so it can be stored in various environments for a long time. The special moisture-proof....
Check Stock

Hydrostar Drain Monster Air Foot Pedal Fits 68284 & 68285 & All Harbor Freight

  • Also fits Home Depots Olympia (which is a Hydrostar/Harbor Freight just painted yellow) and Other Similar Model Drain Cleaners..
Check Stock

Coupons for Harbor Freight Tools

  • * Harbor Freight coupons. 20% off coupons. Free gifts coupons. Harbor freight tools coupons..
Check Stock

Spree compatible replacement for Harbor Freight Predator Super Quiet 2000W Inverter Generator air filter

  • Harbor Freight Predator Inverter Generator 2000W air filter.
  • Fits Harbor Freight p/n 62523 generators.
Check Stock

AISEN Carburetor for Harbor Freight Chicago Predator 3000 3050 3200 4000 WATTS Generator

  • Fits for Harbor Freight Chicago Electric Branded Predator Series 3000 3050 3200 4000 Watts Gasoline Generator Powered by a 208CC 212CC 6.5HP 7HP Engine.
  • Fits for Harbor Freight Chicago Predator Generator 67560 67561 68527 68528 69675 69676 69728 69729.
Check Stock

Boonedox Groovy Landing Gear Standard Kit Kayak Wheel Cart

  • Fits for harbor freight chicago electric branded predator horizontal shaft gas engine.
  • Fit Predator 79cc 99cc 68124 69733 Gasoline Engine Harbor Freight.
  • Package including 1pc carburetor + 2pcs Gaskets + 1pc HURI pocket tape.
  • Note:you could apply for a full refund if you didn't receive HURI branded pocket tape..
Check Stock

Ruma Air Filter Spark Plug Carburetor Kit for Honda GX120 GX160 GX200 5.5Hp 6.5Hp Engine Harbor Freight 212 173 R210 196cc 208cc 212cc Engine and More

  • This tune up kit includes carburetor, air filter, spark plug, insulator, on off stop switch, gasket set, fuel line, fuel joint , fuel line clips, mounting nuts for carburetor and muffler. It's a perfect rebuilding kit..
  • Fits Honda GX120 GX160 GX200 engine and many other equipment with these engines.
  • Fits Harbor Freight Predator 212CC 173cc 6.5Hp, 7Hp,R210 Lifan, Rato, Loncin engine, pressure washer, water pump, compressor 56174 56172 63079 63080 63089 63090 67561 69676 67560 68121 68120 68527 68528 69727 69729 69730 96838 96898.
  • Harbor Freight Greyhound 196CC 6.5HP LIFAN - 66014 66015.
  • Harbor Freight Central Machinery 96549 96500 94187 and more.
Check Stock

HURI Carburetor with Gasket for Harbor Freight Predator 79cc 99cc 68124 69733 Gasoline Engine

  • Fits for harbor freight chicago electric branded predator horizontal shaft gas engine.
  • Fit Predator 79cc 99cc 68124 69733 Gasoline Engine Harbor Freight.
  • Package including 1pc carburetor + 2pcs Gaskets.
Check Stock

WeldingCity 4-pcs Low Temperature Flux Cored Zinc/Aluminum (Zn98-Al2) Brazing Rod 20″ for Joining Al-Al/Cu Alloy in HVAC/Heat Exchanger

  • Premium quality flux cored low temperature Zinc/Aluminum 20″-long brazing rods Zn78-Al22, Zn98-Al2 and Zn92-Al8 series for joining Al-Al and Al-Cu alloy in HVAC, heat exchanger and refrigeration repairs..
  • Flux core means no manual flux application required. Non corrosive flux and ensures good oxidation protection and capillary fill. Ideal for joining aluminum alloys of the 1000, 3000, and 6000 series as well as aluminum to copper welding..
  • Good replacement to equivalent products such as Lucas Milhaupt AL822/AL802 and Harris Aluxcor Zinc-Aluminum brazing filler metals, etc..
  • Brazing rod dimension: 20-in (500mm) length and .078″ (2.0mm) diameter.
  • brazing temperatures as shown in spec. table in picture. Available packages: 4-pcs, 1/2-lb and 1-lb..
  • U.S. based welding supplier. Strong technical support with experienced customer service to address buyer’s any question..
Check Stock

212cc Carburetor Replacement for Harbor Freight Predator 212cc R210 6.5HP 7HP OHV Horizontal Engine Replace Models 60363 68121 69727 68120 69730 carb (with Spark Plug and insulator)

  • 212cc carburetor Also for Honda GX160 GX168F GX200 5.5HP 6.5HP Engines Motor Generator mower carb.
  • 212cc Carburetor fits for Harbor Freight Predator 6.5hp Go Kart OHV Engine.212CC Carburetor fit Harbor Freight Predator 60363 68121 68120 69727 69730 6.5HP/7HP Engine (RATO R210-III)..
  • 212cc carburetor for part number : 16100-ZH8-W51 16100-ZLO-W51 16100-ZE1-814.
  • Carburetor fit for Harbor Freight Branded 212CC Chicago Electric Predator Gasoline Engine.small engine carburetor,predator engine parts,predator carburetor,predator 212cc carburetor,212cc predator engine.
  • Package Includes:1x 212CC carburetor, 3x gasket, 1x fuel filter, 1x fuel line, 1x spark plug ,1x insulator ,Check the Picture Carefully Before You Buy Them! (You will receive what you see in the pictures).
Check Stock

New Replacement Belt for Asian Mini Lathe w/Model # Grizzly 33685 G8688

  • for use with 7x10 Harbor Freight Mini Lathe, 03911 Homier 7x12 Mini Lathe, 33684 Harbor Freight 7x10 Mini Lathe, 5278 Cummins 7x12 Mini Lathe, 82500 Micro-Mark 7x12 Mini Lathe, 82710 Micro-Mark 7x14 Mini Lathe, G8688 Grizzly 7x12 Mini Lathe.
Check Stock