Categories

Best Aluminum Bushing

O'SKOOL Self Centering Dowel Jig Kit Drilling Guide Bushings Set Wood Wide Capacity Doweling Jig Puncher Locator Joints Tool

  • Guide hole sizes are 1/4-Inch, 5/16-Inch, 3/8-Inch, 7/16-Inch and 1/2-Inch. Package induldes: Dowel jig x1.
  • Our jig is patented and easy to adjust ,and can be clamped on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling and wood board joints, it is an ideal tool for panel furniture..
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • The drilling bushing is made of high-quality materials, with high strength and accurate positioning. When using a hand held drilling machinel, the countersunk drill bushing allows the drill bit to slide into the hole easily, ensuring the correct angle of the drill bit..
  • There are 4 holes along the top of the jig, only 2 of the holes accept threaded bushings(Replaceable 1/4" 3/8" 5/16").the other two holes accept 7/16" and 1/2" drill bits..
Check Stock

Penn State Industries PKEDCSS DuraClick EDC Click Ballpoint Pen Kit Starter Package Woodturning Project

  • This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
  • Includes (5) DuraClick EDC Click Ballpoint Pen Woodturning Kits. You will receive (1) of each in 303 Stainless Steel (PKEDCDST), C3604 Brass (PKEDCDBR), 6061-T6 Aluminum (PKEDCDAL), Burnt Bronze Anodized 6061-T6 Aluminum (PKEDCDBB), and Black Anodized 6061-T6 Aluminum (PKEDCDBAL)..
  • Also includes the bushing set (PKSPCL3BU) needed to make the pens.
  • Features an 8mm single tube design, a Schmidt SKM-88 click mechanism, and a Parker style ballpoint refill. Minimum blank size needed to turn is 3/4" x 3/4" x 3"..
  • The pen end includes a tactical designed knurling which is also featured on the pen tip. The pen clip on all finishes is crafted from raw 303 Stainless Steel..
Check Stock

6 INCH Aluminum Bullet Hinge, Weld ON

  • ✔️- 6" Weld-On Aluminum Bullet Hinge..
  • ✔️- No Zerk Fitting (Grease Fitting).
Check Stock

Attwood Wedge 2 Inch Extension Post (13-Inch)

  • Sturdy, dependable mounting point for a boat seat.
  • Wedge bushing locks the post into the base with a tight, solid fit.
  • Bushing is securely mounted to the post with 2-point stainless steel riveting.
Check Stock

AUTOTOOLHOME Self Centering Doweling Jig Plus 6 inch Widen Wood Dowel Jig Extended Step Drill Guide Bushings Set Woodworking Joints Tools

  • AUTOTOOLHOME self centering doweling jig Extended can be used to make accurate butt joints,miter joints and edge joints as well as acting as a mortising guide..
  • Self Centering Dowel Jig PLUS can be used for more wider material, on boards of different thicknesses(clamping wide capacity: 3/8" to 6"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture..
  • Made from aircraft grade aluminum,more stable, corrosion resistance.Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The steel block and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

AUTOTOOLHOME Gold Self Centering Doweling Jig Kit 2 inch 6PC Drill Guide Bushings Set Adjustable Width Wood Dowel Jig Woodworking Joints Tools

  • ... 3/8" to 2"). Easy to install and use. Suitable for drilling guide and wood board joints, it is an ideal tool for panel furniture.make some shelves, cabinets, desks, tables, repairing doors ,installing railings..
  • The two pressing blocks are made of aircraft grade aluminum, surface is anodized for Gold color and does not easily leave scratches. Accurate positioning: fixture bolts provide very good threads, and provide bushes of different sizes to realize simple and convenient precise drilling,so that the positioning is more accurate, no offset or gaps are left.
  • The pressing blocks and clamping screw handle securely tightens the tools like a vise, and the fine thread spacing of screw handle provides uniform and stable clamping pressure for clamping the workpiece. The jig with rugged aluminum sides holding work securely without damage to the wood..
  • There are 4 drill guide holes, along the top of the jig,2 holes accept 7/16" and 1/2" drill bits directly.the other 2 holes accept threaded replaceable steel bushings.Package induldes 1/4" drilling bushing x 2.
Check Stock

Wellbody 5 | Heat Massage Gun | Deep Tissue Massaging Device | Heatball Technology | Quiet Handheld Portable | Massage Tool for Muscles | All Aluminum Powertrain

  • ...LESS MOTOR- We custom built a high-performance brushless motor that is designed specifically to withstand the rigors of day-to-day, high-speed vibration. We then made sure to properly secure the motor so it won’t loosen or vibrate and will stay quiet over time, a problem with virtually all other massage guns..
  • ALL-ALUMINUM PRECISION POWERTRAIN-Fully made of premium ADC–12 aluminum. There are no plastic powertrain parts, period! Being all aluminum means all components expand and contract in unison when subjected to the heat and friction that is inevitable in a massage gun. This all-aluminum design dramatically reduces the system fatigue that leads to increased noise and premature system failure..
  • EXTRA-LONG ALUMINUM BRONZE BUSHING - WellBody uses an extra-long aluminum bronze bushing (bearing sleeve) which increases overall contact with the reciprocating shaft to provide greater stability and efficiency, which reduces wear and noise. Aluminum-bronze is a material known for its low coefficient of friction and superior glide ability, and, because it is metal, it will not distort..
  • DEEPSPEED- The Holy Grail in massage gun performance is speed at amplitude. Thanks to our all-In all-aluminum powertrain, state-of-the-art design and precision engineering, w....
Check Stock

Wellbody 3 | Heated Massage Gun | Deep Tissue Massaging Device | Heatball Technology | Quiet Handheld Portable | Massage Tool for Muscles | All Aluminum Powertrain

  • ...LESS MOTOR- We custom built a high-performance brushless motor that is designed specifically to withstand the rigors of day-to-day, high-speed vibration. We then made sure to properly secure the motor so it won’t loosen or vibrate and will stay quiet over time, a problem with virtually all other massage guns..
  • ALL-ALUMINUM PRECISION POWERTRAIN-Fully made of premium ADC–12 aluminum. There are no plastic powertrain parts, period! Being all aluminum means all components expand and contract in unison when subjected to the heat and friction that is inevitable in a massage gun. This all-aluminum design dramatically reduces the system fatigue that leads to increased noise and premature system failure..
  • EXTRA-LONG ALUMINUM BRONZE BUSHING - WellBody uses an extra-long aluminum bronze bushing (bearing sleeve) which increases overall contact with the reciprocating shaft to provide greater stability and efficiency, which reduces wear and noise. Aluminum-bronze is a material known for its low coefficient of friction and superior glide ability, and, because it is metal, it will not distort..
  • DEEPSPEED- The Holy Grail in massage gun performance is speed at amplitude. Thanks to our all-In all-aluminum powertrain, state-of-the-art design and precision engineering, w....
Check Stock

MARCOLO NEW Flipers C116 Aluminum Integral Channel Handle Adopts Effective Bushings System Matched with Copper Washer, Advanced Bottle Opener Dark Green

  • ...perfect tolerances, creating an amazing sound and flipping experience.Hardened steel tubes of bushings also mean more durability, as the tolerances won’t change with drops as often. When it comes to premium flippers, bushings are the premiere option for pivot systems..
  • Oxidation Coloring Process and Aircraft-Grade Aluminum：The handle is made of 6061 aircraft-grade aluminum, strong and light enough. And it adopts hard anodic oxidation coloring process, resistant to wear and not easy to fade and bring sleek look. We offer 4 colors for your choice..
  • Integral Channel Handle: Strong and light enough, provides both the best balance and inertia for your advanced practice. You will find the C116 is a very neutral handling flipper. It can be flipped fast or slow and really can adapt to a variety of manipulation styles. Four anti-skid textures are designed on both sides to effectively improve the anti-skid effect..
  • CNC Stonewashed Blade：Dull High Quality Stainless Steel with a stone wash finish. Blade is CNC skeletonized so that the top has more weight to pendulum around smoothly..
  • Easy to Maintain: The best approach is to apply a small drop or two on the pivot hole and wipe it around to coat the inside area of the hole. This will provide enough lubricant fo....
Check Stock

Gullwing Sidewinder II Longboard Trucks - Blue/Orange - 10.0"

  • The new standard for reverse kingpin longboard trucks, made of forged A356 aluminum that's stronger and more precise than any other truck in its category. The Atlas RKP offers a ride that is almost indistinguishable from trucks at 5 times the price..
  • This ready-to-ride truck sports all the signature Atlas features: machined ball pivot, tapered kingpin & built-in speed rings. It also boasts an 8mm axle through the hanger that eliminates additional aluminum making it 20% lighter than the original Atlas.
  • With a cone bushing boardside & a cone bushing roadside this truck is perfect for cruising, carving & freeriding. The cones offer high rebound for a carvy, surfy feel while the 48 degree baseplate & ball pivot create fluid lean you need to feel to believe.
  • Your trucks are the most important part of your longboard. That's why we designed every individual component of our trucks to meet the most exacting tolerances. The end product delivers a fluid, stable, and reactive ride unlike any other longboard truck..
  • Atlas designs each of their longboard trucks from the ground u....
Check Stock

2\ Aluminum Fan Spacer Bryke Racing

  • Lightweight billet aluminum construction/Anodized black.
Check Stock

MSD 8366 Pro-Billet EFI Distributor

  • Drop-in billet replacement for GM distributors with the small cap and external coil.
  • Factory style ignition module accepts factory wiring.
  • CNC machined billet aluminum housing and billet aluminum base.
  • Magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range.
  • Oversized steel shaft is QPQ coated and guided by a sealed ball bearing and an extra long sintered bushing.
Check Stock

Owlsome 5.0 Black Aluminum Skateboard Trucks w/ 52mm Wheels Combo Set (White)

  • Owlsome Aluminum Trucks, 5.0 Hanger, 7.75" Axle.
  • Aluminum Alloy, Carson Steel Axle, 95a Black Bushing.
  • Come with 1/8" Black Riser Pads and 1.0" Hardware.
Check Stock