Categories

Best Aluminum Cast Coil

Memphis MJM622 6.5' 700W RMS Dual 2-Ohm MOJO Series Subwoofers

  • Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″, Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..
Check Stock

Sundown Audio X-8 Series Subwoofers 800W RMS/Subwoofer (Pair X-8 V.3 D2 8' Subwoofers)

  • Black Aluminum 2.5” voice coil former for superior heat dissipation.
  • Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
  • High strength & patented cast aluminum frame.
Check Stock

MJMECHEV8D1 Select Chevy Trucks (2) MOJO 8" Subwoofers Custom Enclosure

  • Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 2" voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 8", 900W RMS Power | 1800W Peak Power. Sensitivity: 82 dB, Magnet Size: 105 oz, Mounting Depth: 5.75", Cut Out Diameter: 7.32", and Voice Coil Diameter: 2"..
Check Stock

Sundown Audio U-10 D2 10' 1500W RMS Dual 2-Ohm U-Series Subwoofer

  • Features: Black Aluminum 3” voice coil former for superior heat dissipation, High Temperature Round-Wire CCAW voice coil with high-temp black adhesive, Double stitched surround, Heavy duty cast basket, Spring loaded terminals accept up to 8 gauge, Stitched-on double-XL tinsel leads, Rear vented pole piece, Rear drilled gap-venting, Innovative high-velocity cast aluminum vented frame spacer ring, Magnet ID shorting ring, Top-Plate Cooling Channels, Cast Aluminum surround bolt-on rings, Optimized.
  • Specifications: 1500 Watts RMS | Linear X-Max by 70% | Magnet Diameter: 8.66 in. | DC Resistance (Re): 3.8 Ω | Resonance Frequency (Fs): 48.5 Hz | Equivalent Volume (Vas): 8.3 L | Electrical Q Factor (Qes): 0.35 | Mechanical Q Factor (Qms): 3.20 | Total Q Factor (Qts): 0.32 | Force Factor (BL): 26.8 NA | Moving Mass (incl. Air Load) (Mms): 216.3 g | Suspension Compliance (Cms): 0.05 mm/N | Sensitivity: 86.2 dB 1w / 1m.
  • Box Recommendations: Sealed Enclosure Suggestion: 0.5 cu. ft. | Ported Enclosure Suggestion: 1.0 cu. ft. | Displacement: 0.21 cu. ft. | Depth: 7.007 in |Outside Diameter: 10.94 in | Cutout: 9.17 in | Recommended Tuning: 32 Hz | Recommended Port Area: 16 sq. in..
Check Stock

Audiopipe Black ATR series 600 watt max tweeter (each)

  • 350 Watt Aluminum Bullet Titanium Horn Tweeter – 1 Pair.
Check Stock

Timpano Horn Driver TPT-DH175 150W 1\ Ferrite Compression Horn Driver 8 Ohm (Single)

  • Speaker size: 3.75" Type: Super Horn Tweeter Peak power: 600 Watts Tweeter composition: Aluminum dome.
  • Tweeter size: 3.75" Impedance: 8 ohms Sensitivity: 99 dB Frequency response: 2000 Hz - 20000 Hz.
  • System: Tweeter Protection: Aluminum frame Voil coil: Aluminum Composition: Die cast aluminum.
  • Tweeter design: Titanium super tweeter Mounting depth: 1" Diameter: 3.75".
  • Die cast aluminum frame Tweeters are made from durable materials Spade tweeter terminals for easy installations.
Check Stock

Memphis Audio MJM644 MOJO Series 6.5 Inch 700 Watt RMS 1,400 Watt Peak Dual Subwoofer Vehicle Car Audio System

  • Features and Specifications: Vented cast aluminum basket, Fiberglass reinforced cone, Stitched foam surround, Heat dissipating aluminum heat sink, 4-layer copper 1.5″ voice coil, DVVC (Direct Vent Voice Coil) Cooling, Size: 6.5″. Power Handling: 700W RMS Power | 1400W Peak Power. Sensitivity: 82dB, Magnet Size: 80 oz, Mounting Depth: 5″, Cut Out Diameter: 5.95″, and Voice Coil Diameter: 1.5″..
Check Stock

SA-8 V.3 D4 - Sundown Audio 8' 500W RMS Dual 4-Ohm SA Series Subwoofer

  • Stitched-On Double High-Power Tinsel Lead Wires.
  • Black Aluminum 2.5” voice coil former for superior heat dissipation.
  • Solid Pole piece with chamfered edges & machined air channels for increased voice coil cooling.
  • High strength & patented cast aluminum frame.
Check Stock

Memphis Audio MOJO 1212 12" 3000 Watt Competition Car Subwoofer Sub MOJO1212

  • 1Ω or 2Ω ohm selectable impedance RMS: 1500 watts Peak: 3000 watts.
  • 3.5” aluminum triple voice coil Vented cast aluminum basket Double stitched rubber surround.
  • DVVC Direct Vent Voice Coil Cooling 250 oz magnet Light weight Polypropylene dustcap.
  • Reinforced spider Folded surround for increased excursion without sacrificing effective surface area Sensor: 83 dB.
Check Stock

Tektall LS Finned Cast Aluminum Valve Covers with Coil Mounts and Covers Compatible with Che-vy Small Block SB V8 293 325 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably..
  • 【Fitment】 Fits for Chev-rolet small block V8 gen. III/IV (LS BASED) 4.8 5.3 5.7 6.0 6.2 7.0.
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ TSP 81015) LS style ignition coils..
  • 【Features】 The base has a tall internal height to allow for added valvetrain clearance and no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top..
  • 【Package includes】 Coil Cover Mounting Hardware, Coil Hardware & Spacers, Low-Profile Oil Fill Caps and Valve Cover Gaskets.
Check Stock

Tektall LS Smooth Cast Aluminum Valve Covers with Coil Mounts and Covers Compatible with Che-vy Small Block SB V8 293 325 376 427, Black

  • 【Top Quality】 Made of Highly durable Cast Aluminum . High sealing performance gasket and silicone sealant to stop the oil leak. Precisely engineered make your car run powerfully and stably.
  • 【Fitment】 Compatible with Che-vy Small Block SB V8 293 325 376 427, Black. Accepts Gen 1 (Delco D580) and Gen 5 (Delco D510C/ 81015) LS style ignition coils.Valve Cover Base Mounts to LS1, LS2, LS3, LS6, and LS7 Engines..
  • 【Function】 Cast aluminum valve covers are a great way to improve the look of your LS engine, without any radical changes to its configuration..
  • 【Features】 The base has a tall internal height to allow for added valvetrain clearance and no brackets required. It also features a baffled stock-style ventilation set-up. The coil cover features cut-outs for routing the wiring harness and spark plug wires and comes with a classic, finned top..
  • 【Package Included】 Coil Cover Mounting Hardware, Coil Hardware & Spacers, Low-profile Oil Fill Caps and Valve Cover Gaskets.
Check Stock

Soundstream T5.104 Subwoofer

  • Key components that you expect from T5 still remain.
  • big ass 1,000w 3” voice coil, triple-stack magnet structure, high-density Spruce pulp sub-cone, and the iconic black-on-black Soundstream spider..
  • Overcompensating Motor Structure for Increased Magnetic Strength | 12mm T-Yoke & Top Plate Improve Low-Frequency Dynamics | Vented T-Yoke & Frame Reduces Voice Coil Heat Build-up.
  • Non-magnetic non-resonate die-cast aluminum frame | 3” 4-layer voice coil w/ direct connect wire increases power handling | high-temperature tolerance adhesives resist thermal failure.
  • Extended excursion polyether foam Surround w/ UV & chemical protection | Dual poly-cotton Suspension dampen violent accelerations | 1-pc gasket/trim ring w/ concealed mounting holes included.
  • Max power (watts) 1, 800 | RMS power (watts) 900 | efficiency (1W/1M dB) 83.5Db | voice coil configuration 3″ dvc 4Ω.
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock